Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266 nm; comparison with 532 and 1064 nm pulses

Interaction of Nd:YAG laser, operating at 266 nm wavelength and a pulse duration of 40 ps, with AISI 1045 steel was studied. Surface damage threshold was estimated to be 0.14 J/cm². The steel surface modification was studied at the laser fluence of ∼1.0 J/cm². The energy absorbed from Nd:YAG laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. The following AISI 1045 steel surface morphological changes and processes were observed: (i) intensive damage of the target in the central zone of irradiated area; (ii) appearance of periodic surface structures at nano-level, with periodicity in agreement with the used wavelength; (iii) reduction of oxygen concentration in irradiated area; and (iv) development of plasma in front of the target. Generally, interaction of laser beam with AISI 1045 steel (at 266 nm) results in a near-instantaneous creation of damage, meaning that large steel surfaces can be modified in short times.     

Structure of the even-even ~(78-84)Kr isotopes within SD-pair shell model

The collective properties in the even-even 78-84Kr isotopes have been studied within the framework of the SD-pair shell model.It is found that the collectivity of low-lying states in the even-even Kr isotopes can be described very well.     

Pd/Au纳米结构制备和粒子组分自旋的谱学性能研究

为研究Pd/Au纳米结构制备和电催化性能、控制粒子大小组分和自旋,用油浴热分解方法制备了核/壳纳米结构Pd/Au双金属合金纳米颗粒,采用PVP和多元醇作表面活性剂和稳定剂,依据溶液浓度、颗粒大小、吸附能控制晶相获得了均匀、一致的2层和3层Pd/Au纳米样品,并采用HAADF和HRTEM测试了纳米结构尺寸形貌,用EDS测试了成分分布,试验产物用TEM/XRD进行了表征,结果表明,Pd/Au具有面心立方八面体结构,与Au/Pd核壳不同,纳米Pd/Au具有活性、耐久性、电催化性和稳定性。     

Propagation of cylindrical vector beams in a turbulent atmosphere

<正>Based on the extended Huygens-Presnel principle,the propagation of cylindrical vector beams in a turbulent atmosphere is investigated.The intensity distribution and the polarization degree of beams on propagation are studied. It is found that the beam profile has a Gaussian shape under the influence of the atmospheric turbulence,and the polarization distribution shows a dip in the cross section as the beam propagates in the turbulent atmosphere.It is also found that the beam profile and the polarization distribution are closely related to beam parameter and atmospheric turbulence.     

低强度飞秒激光激发下CdTe和CdTe/CdS核壳量子点的荧光上转换研究

利用400 nm和800 nm不同波长的低强度飞秒激光,对CdTe和CdTe/CdS核壳量子点溶胶进行激发,研究其稳态和时间分辨荧光性质.800 nm飞秒激光激发下,CdTe和CdTe/CdS核壳量子点产生上转换发光现象,上转换荧光峰与400 nm激发下的荧光峰相比蓝移最多达15 nm,而且蓝移值与荧光量子产率有关.变功率激发确认激发光功率与上转换荧光强度间满足二次方关系,时间分辨荧光的研究表明荧光动力学曲线服从双e指数衰减.提出表面态辅助的双光子吸收模型是低激发强度上转换发光的主要机理.CdTe和CdT 关键词： CdTe量子点 CdTe/CdS核壳量子点 时间分辨荧光 上转换荧光     

替代柱面透镜的二元光学元件设计

在二极管泵浦固体激光器耦合光学系统中，柱面透镜起着非常重要的作用。随着系统轻量化、小型化的要求需要用重量轻、尺寸小的光学器件来替代。本文介绍一种用于替代柱面透镜的二元光学元件的设计和制作方法。     

强激光辐照下预载柱壳热屈曲失效的数值分析

 采用有限元方法（ANSYS7.0）和简易的热力耦合本构关系,较系统地数值研究了预载柱壳受激光辐照时的热力响应和热屈曲失效行为,分析了几种壳体在不同预载条件下（轴压或内压）的屈曲模态和屈曲特征值,给出了屈曲模态和热屈曲失效与激光强度、辐照时间、预载条件和壳体几何尺度及形状间的定量或定性关系。计算结果表明：（1）屈曲失效行为主要集中在激光辐照区内且以径向屈曲为主。（2）在一定范围内,屈曲特征值与光斑中心点温度近似有线性关系。（3）激光辐照区内高温引起的材料软化和预载径向变形的耦合作用是柱壳发生热屈曲失效的根本原因,有效提高结构刚度,可使屈曲特征值提高。（4）壳体形状的改变对内压柱壳有更为明显的影响,其中圆柱形壳体屈曲特征值最大,因此具有较高的安全性。     

一维固-固结构圆柱声子晶体中弹性波的传输特性

利用一维固-固结构圆柱声子晶体中弹性波横向受限的条件,推导出弹性波在其中各个模式满足的关系式,利用它研究了弹性波各模式的特性.并利用转移矩阵研究了弹性波的传输特性随模式量子数和圆柱半径的变化规律.得出了一些一维固-固结构圆柱声子晶体的新特征,即弹性波的传输特性由模式量子数和圆柱半径决定. 关键词： 圆柱声子晶体 弹性波 受限 模式     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...