Flume testing of passively adaptive composite tidal turbine blades under combined wave and current loading

The tidal energy industry is progressing rapidly, but there are still barriers to overcome to realise the commercial potential of this sector. Large magnitude and highly variable loads caused by waves acting on the turbine are of particular concern. Composite blades with in-built bend-twist elastic response may reduce these peak loads, by passively feathering with increasing thrust. This could decrease capital costs by lowering the design loads, and improve robustness through the mitigation of pitch mechanisms. In this study, the previous research is extended to examine the performance of bend-twist blades in combined wave–current flow, which will frequently be encountered in the field. A scaled 3 bladed turbine was tested in the flume at IFREMER with bend-twist composite blades and equivalent rigid blades, sequentially under current and co-directional wave–current cases. In agreement with previous research, when the turbine was operating in current alone at higher tip speed ratios the bend-twist blades reduced the mean thrust and power compared to the rigid blades. Under the specific wave–current condition tested the average loads were similar on both blade sets. Nevertheless, the bend-twist blades substantially reduced the magnitudes of the average thrust and torque fluctuations per wave cycle, by up to 10% and 14% respectively.     

Interface trap-induced negative differential resistance in nMOSFET with floating source

Interface trap can act as the generation center in device to induce a very weak generation current. We observed the negative differential resistance NDR of this generation current I_D in nMOSFET with the floating source. It originates from that the generation function of interface trap is enabled and then is shut down in turn as increasing the drain voltage. This change relies on the interaction among the interface trap energy-level and the electron's Fermi-levels of drain and source under the floating source condition. It is found that the peak-to-valley ratio of I_D is beyond 30.     

交错跃迁Hofstadter梯子的量子流相

为玻色Hofstadter梯子模型引入交错跃迁,来扩展模型支持的量子流相.基于精确对角化和密度矩阵重整化群计算发现,无相互作用时,系统中包含横流相、涡旋相和纵流相;横流相来自均匀跃迁时Hofstadter梯子模型的Meissner相,纵流相是交错跃迁时才可见的流相.强相互作用极限下系统的超流区也包含横流相、纵流相和涡旋相,但存在更多的相变级数;超流区的横流相、纵流相之间存在相变但Mott区的不存在,把Mott区的"横、纵流相"称为Mott-均匀相,在Mott区只存在均匀相和涡旋相.跃迁的交错会压缩涡旋相存在的区域,使Mott区最终只剩下均匀相;跃迁的交错不仅能驱动Mott-超流相变,还使磁通的改变也能够驱动系统的Mott-超流相变.对这一系统的研究丰富了磁通系统中的量子流相,同时为研究拓扑流特性提供了模型支持.     

多路Marx并联高压脉冲电源研究

脉冲功率技术在工业和生物医学领域有着广泛的应用,很多应用场合要求输出数百安培的高压脉冲。固态Marx发生器虽已研究多年,但是被广泛采用直插封装的IGBT和MOSFET功率半导体开关管的额定电流通常都低于100 A,无法满足低阻抗负载的应用需求。为提高输出脉冲电流幅值,提出两种多路Marx发生器并联的脉冲电源的拓扑结构,第一种方案采用多路Marx发生器直接并联,第二种是共用一组充电开关管的多路Marx发生器并联。由FPGA提供充放电控制信号,采用串芯磁环隔离驱动方案实现带负压偏置的同步驱动,主电路选用开通速度快、通流能力强的IGBT为主开关的半桥式固态方波Marx电路。实验结果表明,6路16级Marx直接并联的脉冲发生器能输出重频100 Hz高压方波脉冲幅值可达10 kV,在30Ω负载侧输出峰值电流可达300 A,上升时间230 ns。共用充电开关管的6路4级Marx并联发生器在5Ω电阻负载上的输出电流峰值可达300 A,最大输出电流可达460 A,上升时间272 ns。表明多路Marx发生器并联可以有效地减小系统内阻,提高系统带载能力;改进后的并联方案实现大电流脉冲输出的同时,所采用的开关管数量减小近一半,提高了系统的抗干扰能力的同时,降低了脉冲电源的成本;且增加级间并联导线可进一步改善均流效果。     

一种超导重力仪磁悬浮力的等效计算

为实现超导重力仪磁悬浮力的精确计算,以GWR型超导重力仪为模型基础,采用有限元的思想,将超导球表面电流理想化为多个等高共轴电流环,计算出各个电流环与超导线圈的作用力,求和得到线圈与超导球间的磁悬浮力。利用MATLAB完成计算程序实现,通过改变下线圈电流和上、下线圈电流比,获得满足一定条件的磁悬浮力及其梯度。选取合适的模型参数,计算出线圈对质量为m=4.069 g超导球的磁悬浮力大小为:Ftotal=3.988×10^-2N,磁悬浮力梯度为:-9.699×10^-3N/m,此时悬浮力梯度合适,满足系统稳定性和灵敏度的要求。     

基于工作电流分析的回转副摩擦状态识别实验研究

回转副摩擦状态的变化对机械设备的运行有着重要影响. 针对回转副摩擦状态的识别问题, 设计了以回转副工作电流为摩擦特征来源的实验方案. 通过采集摩擦过程的回转副驱动电机工作电流信号, 分析实验信号的频域和时频域特征, 建立工作电流的摩擦特征库, 用于训练多分类支持向量机分类器, 并在分类器上完成摩擦状态的识别. 实验结果表明, 经特征提取与降维处理后建立的多分类支持向量机分类器具有近90%的识别正确率, 所提出的实验方案有利于实现远距离信号的采集, 适用实际生产加工.     

A systematical study of the chiral magnetic effects at the RHIC and LHC energies

Considering the magnetic field response of the QGP medium,we perform a systematical study of the chiral magnetic effect(CME),and make a comparison with the experimental results for the background-subtracted correlator H at the energies of the RHIC Beam Energy Scan(BES)and the LHC energy.The CME signals from our computations show a centrality trend and beam energy dependence that are qualitatively consistent with the experimental measurements of the charge dependent correlations.The time evolution of the chiral electromagnetic current at the RHIC and LHC energies is systematically studied.The dependence of the time-integrated current signal on the beam energy√s with different centralities is investigated.Our phenomenological analysis shows that the time-integrated electromagnetic current is maximal near the collision energy√s≈39 GeV.The qualitative trend of the induced electromagnetic current is in agreement with the CME experimental results at the RHIC and LHC energies.     

Faraday镜预转角对FMOCT输出光偏振态的影响

通过计算机仿真,运用琼斯矩阵理论分析了Faraday镜预转角对法拉第镜式光学电流互感器输出光偏振态的影响.实验测量了Faraday镜实际预转角的大小,测量了外磁场的改变对Faraday镜预转角的影响.外磁场的存在和变化使Faraday镜预转角偏离初始值,并使系统输出光由理想状态下的线偏振光退化成椭圆偏振光,并引起法拉第镜式光学电流互感器工作灵敏度和稳定性的下降.提出了用电磁屏蔽解决外界磁场影响的方法.     

An experimental investigation into non-linear wave loading on horizontal axis tidal turbines

Tidal turbines are subject to large hydrodynamic loads from combinations of currents and waves, which contribute significantly to fatigue, extreme loading and power flow requirements. Physical model testing enables these loads and power fluctuations to be assessed and understood in a controlled and repeatable environment. In this work, a 1:15 scale tidal turbine model is utilised to further the fundamental understanding of the influence of waves on tidal turbines. A wide range of regular waves are generated in both following-current and opposing-current conditions. Wave frequencies range from 0.31 Hz to 0.55 Hz & wave heights from 0.025 m to 0.37 m in a fixed 0.81 m/s current velocity. Waves are selected and programmed specifically to facilitate frequency domain analysis, and techniques are employed to isolate the effect of non-linear waves on turbine power and thrust.Results demonstrate that wave action induces large variations in turbine power and thrust compared to current only conditions. For the range of conditions tested, peak values of thrust and power exceed current-only values by between 7%–65% and 13%–160% respectively. These wave-induced fluctuations are shown to increase with wave amplitude and decrease with wave frequency. Following wave conditions exhibit greater variations than opposing for waves with the same wave height and frequency due to the lower associated wavenumbers.A model is developed and presented to aid the understanding of the high-order harmonic response of the turbine to waves, which is further demonstrated using steady state coefficients under assumptions of pseudo-stationarity. This approach is proven to be effective at estimating wave-induced power and thrust fluctuations for the combinations of waves, currents and turbine state tested. The outcome of which shows promise as a rapid design tool that can evaluate the effect of site-specific wave–current conditions on turbine performance.     

单斜ZnP2负极材料的锂化机理及性能

过渡金属磷化物电位低且比容量高, 是有发展前景的锂离子电池(LIBs)负极材料. 其中, ZnP₂属于双活性负极材料, Zn与P都能与Li⁺发生反应, 储Li⁺性能更具有竞争力. 但是, 对于ZnP₂的锂化机理及产物尚不明确. 采用第一性原理计算和电化学测试方法研究了ZnP₂的电子性质和电化学性能, 通过理论计算和实验测试相结合阐述了ZnP₂的锂化机制. 首先, 以密度泛函理论(DFT)计算揭示了ZnP₂的锂化机理、Li⁺扩散路径、势垒和理论比容量(1477 mAh/g). 其次, 通过直流电弧等离子体法及固相烧结法合成ZnP₂, 并测试其首圈放电曲线, 显示放电容量为1439 mAh/g, 与理论计算结果相近. 此外, 薄膜X射线衍射(XRD)检测最终产物成分为LiZn和Li₃P, 与DFT计算结果一致.