Novel cardo polyamides with high solubility,thermally stability,and flame retardancy

Abstract

A new monomeric building block was prepared via three consecutive reactions. 4-(4-Nitrobenzyl)pyridine was catalytically reduced to 4-(4-aminobenzyl)pyridine by converting the nitro to amino group. In second step, the later compound was reacted with 3,5-dinitrobenzoyl chloride to obtain a dinitro compound which finally was converted to a new diamine by reduction of nitro groups. Polycondensation reactions of the diamine with diacidchlorides led to preparation of novel cardo polyamides with high thermal stability and flame retardancy, as well as improved solubility. The structure-property relations were studied by varying the diacidchlorides to investigate the effect of symmetry and aromaticity on the polymers.     

Catalytic activity of Pt and Pd in gaseous reactions of H2 and CH4 oxidation at low pressures

1. Download : Download high-res image (85KB)
2. Download : Download full-size image

     

The stabilization of partially-premixed jet flames in the presence of high potential electric fields

Numerous research efforts have focused on flame stabilization and emissions. Based on initial experiments, specific mechanisms resulting from DC electric fields were chosen to be investigated, namely the chemical, thermal, and ionization mechanisms. Numerical simulations were performed on premixed propane-ozone-air flames to characterize ozone effects on flame speed resulting from the formation of ozone in high potential electric fields. These results were compared against partially premixed flame experiments to observe the dominant influences within leading edge stabilization within high potential electric fields. It was found that the electromagnetic or ionization influences, serve as the dominant effect on the combustion zone.     

火焰原子吸收分光光度法测定维血康颗粒中总铁

建立火焰原子吸收分光光度法测定维血康颗粒中总铁的含量,火焰类型选择空气–乙炔,测定波长为248.3 nm,测定时间为4.0 s,燃气流量为0.9 L/min,以氘灯作为背景校正。铁的质量浓度在2.4~28.8μg/mL范围内与吸光度呈良好的线性,线性相关系数r~2=0.999 8。6次测定结果的相对标准偏差小于1.0%,样品加样回收率为93.89%,方法检出限为0.011 3μg/mL。该方法具有准确度高,稳定性、重复性好等优点,可用于维血康颗粒中总铁含量的测定。     

Polybrominated diphenyl ethers (PBDEs) in marine sediment of Thermaikos Gulf,Greece

Polybrominated diphenyl ether (PBDE) concentrations were determined in marine sediment samples collected from 7 different locations around Thermaikos Gulf in north Greece. PBDEs were detected in all sampling sites and their average total concentration (ΣPBDEs) ranged from 0.26 to 4.92?ng?g^?1?d.w. Concentrations were an order of magnitude higher in locations outlining the inner part of the Gulf, which were also closer to industrial areas, sewage treatment plant discharges, the city's harbour and landfill area. These findings suggest pollution in the aquatic ecosystem from industrial and urban activities in the area. Congener profiles exhibit predominance of BDE-209, while concentrations of other PBDE congeners were usually lower, when compared to similar studies from other countries globally, indicating that Thermaikos Gulf is among the low-polluted areas. Statistical analysis showed significant differences among the higher polluted sampling stations. Statistically significant differences also existed between sampling stations with high and low PBDE concentrations. Correlations between congeners suggested local contamination sources; however, specific point sources of pollution were not established.     

Determination of As(III) using developed dispersive liquid–liquid microextraction and flame atomic absorption spectrometry

The method relies on selective complexation of As(III) with a suitable chelating agent followed by dispersive liquid–liquid microextraction (DLLME) method. Flame atomic absorption spectrometry (FAAS) equipped with microsample introduction system was utilised for determination of As(III). 1-Undecanol and acetone were used as extraction solvent and disperser solvent respectively. Some effective parameters on complex formation and extraction have been optimised. Under the optimum conditions, the enrichment factor of 108 for As(III) was obtained from 9.8?mL of water samples. The calibration graph was linear in the range of 2–15?µg?L^?1 with detection limits of 0.60?µg?L^?1 for As(III). The relative standard deviation (R.S.D.) for ten replicate measurements of 5.00?µ?gL^?1 of As(III) was 6.2%. Operation simplicity and high enrichment factors are the main advantages of DLLME for the determination of As(III) without necessity for hydride generation in water samples.     

First and second coordination spheres in 8-azaxanthinato salts of divalent metal aquacomplexes – Ab initio and DFT study

The hydrogen bonding pattern in complexes of the type [M²⁺(H₂O)₆](dmax)₂ (M = Mn, Ni, Co, Zn, Cd, Hdmax = 1,3-dimethyl-8-azaxanthine), [M²⁺(H₂O)₄(py)₂](dmax)₂ (M = Mn, Co, Zn, Cd, py = pyridine) and [M²⁺(dmax)₂(H₂O)₂(py)₂]·2H₂O (M = Ni, Cu) were studied by ab initio (MP2/LANL2DZ//B3LYP/LANL2DZ) and density functional theory methods (B3LYP/LANL2DZ, B3LYP/6-31G^∗∗ and B3PW91/6-31G^∗∗). The investigation includes a variety of theoretical analyses, which include interaction energy, many body analyses, electron density analysis, topological analysis, Mulliken atomic charges, natural atomic charges and harmonic vibrational analysis. The geometrical parameters and vibrational frequencies of dmax (the mono anion of 1,3-dimethyl-8-azaxanthine), [M²⁺(H₂O)₆] (M = Mn, Ni, Co, Zn, Cd), [M²⁺(H₂O)₄·(py)₂] (M = Mn, Co, Zn, Cd) and the complexes, calculated by the theoretical methods, were compared with the recent X-ray crystallographic results and it was observed that the results are found to agree well with the crystallographic results. The present calculations provide an important physicochemical insight into metal cations with 1,3-dimethyl-8-azaxanthine. The results also reveal the active role of coordinated water molecules in modulating the binding of the cation through a specific network of hydrogen bonds. The topology of the motifs generated by these hydrogen bonds has been characterized, adapting to the second coordination sphere concepts usually applied to the first (monodentate, chelate, and bridge) coordination sphere. The optimized structures of the Cd²⁺, Zn²⁺ and Cu²⁺ complexes further interact among themselves in a less tight fashion to generate three dimensional structures (a tape-like hydrogen bond network). Finally these tape-like hydrogen bond network were optimized using the B3LYP/LANL2DZ basis set.     

Flame‐retardant and mechanical properties of phenolic foams toughened with polyethylene glycol phosphates

Three kinds of polyethylene glycol phosphates (PEGPs) toughening agents were synthesized by esterification of phosphorus pentoxide (P₂O₅) with polyethylene glycol and characterized by Fourier transform infrared spectra and ³¹P nuclear magnetic resonance. A series of lightweight phenolic foams toughened with different loadings of PEGPs were prepared. Optical microscopy results show that the addition of PEGPs with small molecular weight PEG improves the structural homogeneity of phenolic foams obviously. The flame retardancy of toughened phenolic foams was evaluated by using UL 94, limiting oxygen index, and cone calorimeter. The results indicate that the incorporation of PEGPs not only increases the toughness of phenolic foams but also improves their flame retardancy. Moreover, the thermal stability of PEGPs and the toughened foams was investigated by thermogravimetric analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Poly(vinyl alcohol)/melamine phosphate composites prepared through thermal processing: thermal stability and flame retardancy

Poly(vinyl alcohol)/melamine phosphate composites (PVA/MP) as a novel halogen‐free, flame‐retardant foam matrix were prepared through thermal processing, and then their thermal stability and flame retardancy were investigated by thermo‐gravimetric analysis, micro‐scale combustion calorimeter, cone calorimeter, vertical burning test, and limiting oxygen index (LOI) test. It was found that the thermal stability and combustion properties of the PVA/MP composites could be influenced by the addition of MP. Compared with the control PVA sample (B‐PVA), in the PVA/MP (75/25) composites, the temperature at 5% mass loss (T_5%) decreased about 10°C, the residual chars at 600°C increased by nearly 27%, the temperature at the maximum peak heat release rate (T_P) shifted from 292°C to 452°C, and the total heat released and the heat release capacity (HRC) decreased by 28% and 14%, respectively. Moreover, the PVA/MP composites could reach LOI value up to 35% and UL94 classification V‐0, showing good flame retardancy. At the same time, both Fourier transform infrared and X‐ray photoelectron spectroscopy spectra of the residual chars from the PVA/MP composites demonstrated that the catalytic effect of MP on the dehydration and decarboxylation reactions of PVA, and the chemical reactivity of MP during the chars‐forming reactions could be used to account for the changed thermal stability and flame retardancy of the PVA/MP composites. Copyright © 2012 John Wiley & Sons, Ltd.