Flame retardancy and thermal decomposition behavior of TPU/chitosan composites

The application of chitosan (CS) in new materials is a hot research topic. In this paper, CS was used alone as flame retardant to prepare thermoplastic polyurethane elastomer (TPU) composites. Then, the flame retardancy and thermal decomposition behavior of TPU/CS composites were intensively investigated using cone calorimeter test (CCT), scanning electron microscope (SEM), microscale combustion colorimeter (MCC) test, thermogravimetric analysis/infrared spectrometry (TG‐IR), and gas chromatography‐mass spectrometry (GC‐MS). The results showed that CS can reduce the fire risk of TPU; 2.0‐wt% CS could make the peak value of heat release rate (pHRR) decreased to 457.2 kW/m², reduced by 65.9% compared with TPU. And the peak value of smoke production rate (pSPR) and total smoke release (TSR) of the same sample was decreased by 79.4% and 54.2%, respectively. The TG‐IR and GC‐MS results confirmed that CS could promote TPU decomposition in advance, reacting with the decomposition products of TPU. Therefore, the production of combustible gas was reduced. The GC‐MS results showed that the production of isocyanates and ethers was reduced with the addition of CS. The digital photographs of SEM for the samples after CCT were shown that the char residue layer of the sample containing 2.0‐wt% CS was fibrous in shape. It could be speculated that the thermal decomposition products from TPU could react with CS at low temperature, which reduced the production of flammable gases. So CS had a good prospect in reducing the fire hazard for TPU.     

Design of aluminum trihydroxide and P‐N core‐shell structures and their synergistic effects on halogen‐free flame‐retardant polyethylene composites

In order to improve the performance of inorganic/organic composites, aluminum trihydroxide (ATH) core composites with a styrene‐ethylene‐butadiene‐styrene block copolymer grafted with maleic anhydride (MAH‐g‐SEBS) shell phase, and P‐N flame retardant as a synergistic agent, were prepared through an interface design. The effects of polyethylene glycol (PEG) content on the interfacial interaction, flame retardancy, thermal properties, and mechanical properties of high‐density polyethylene (HDPE)/ATH composites were investigated by small angle X‐ray diffraction, rotational rheometer, limiting oxygen index, thermogravimetric analysis (TGA), and tensile testing. The ATH synergistic effects of P‐N flame‐retardant improved the combustion performance of HDPE/ATH/PEG(3%)/MAH‐g‐SEBS/P‐N (abbreviated as HDPE/MH3/M‐g‐S/P‐N) composite by forming more carbon layer, increased the elongation at break from 21% to 558% compared to HDPE/ATH, and increased the interface thickness from 0.447 to 0.891 nm. SEM results support the compatibility of ATH with HDPE increased and the interfacial effect was enhanced. TGA showed the maximum decomposition temperature of the two stages and the yield of the residue at high temperature increased first and then decreased with the increase of PEG content. Rheological behavior showed the storage modulus, complex viscosity, and the relaxation time initially increased and then decreased with the increase of PEG content indicating PEG, M‐g‐S, and ATH powder gradually formed a partial coating, then a full coating, and finally an over‐coated core‐shell structured model.     

Organophosphate esters by GC–MS: An optimized method for aquatic risk assessment

Organophosphate esters used as flame retardants and plasticizers are ubiquitous contaminants in surface waters. Many studies indicate that these compounds are neurotoxicants, endocrine disruptors, and may affect reproduction and development of aquatic organisms. Thus, analytical methods that allow accurate quantification of these contaminants at environmentally relevant concentrations are desirable for risk assessment studies. In this study, a method based on solid phase extraction and gas chromatography coupled to mass spectrometry was developed for determination of organophosphate esters in river water extracts. Multivariate optimization was used to determine the best conditions for injection of larger volumes of sample in a Programmable Temperature Vaporization inlet. Furthermore, the matrix effect on the instrumental response was evaluated and compensated by association of extraction‐blank‐matched calibration and isotopically labeled focus standards. The method quantification limits ranged from 0.009 to 0.11 µg/L, staying below the predicted non‐effect concentration for the aquatic compartment for all analytes, which is a requisite for using in risk assessment studies. The method was applied to freshwater samples collected in rivers from the Sao Paulo State, Brazil, and eight out of the ten target organophosphate esters were quantified, being tris(2‐chloroisopropyl) phosphate and tris(phenyl) phosphate the most frequently detected compounds.     

Effervescent tablet‐assisted demulsified dispersive liquid–liquid microextraction based on solidification of floating organic droplet for determination of methadone in water and biological samples prior to GC‐flame ionization and GC‐MS

A novel effervescent tablet‐assisted demulsified dispersive liquid–liquid microextraction based on the solidification of floating organic droplet was developed to determine methadone prior to gas chromatography with flame ionization detection and gas chromatography with mass spectrometry. In this method, a tablet composed of citric acid, sodium carbonate, and 1‐undecanol was utilized. The resulting effervescent tablet generated carbon dioxide in situ to disperse 1‐undecanol in the sample. Thus, the dispersive and extraction processes were performed in one synchronous step. An aliquot of acetonitrile as the demulsifier solvent was used for the separation of two phases instead of centrifugation. Under optimal conditions, the developed method was linear up to 50 000 µg/L with correlation coefficients higher than 0.99. Moreover, limits of detection and limits of the quantification were in the range of 3‐10  and 7‐30 µg/L in water and biological samples, respectively. Intra‐ and interday precisions (n = 6) of the spiked methadone at a concentration level of 50 µg/L were over ranges of 5.1‐6.8% and 5.7‐7.1%, respectively. The preconcentration factors and recovery values were obtained in the range of 140‐145 and 98.1 to 101.6% in real samples, respectively.     

FORCE FIELDS ON INVISCID,SLENDER, ANNULAR LIQUID JETS

Regular perturbation expansions are used to analyse the fluid dynamics of unsteady, inviscid, slender, thin, incompressible (constant density), axisymmetric, upward and downward, annular liquid jets subjected to non-homogeneous, conservative body forces when both the annular jets are very thin and the gases enclosed by and surrounding the jet are dynamically passive. Both inertia- and capillarity-dominated annular jets are considered. It is shown that, for inertia-dominated jets, closure of the leading-order equations is achieved at second order in the perturbation parameter, which is the slenderness ratio, whereas closure is achieved at first order for capillarity-dominated jets. The steady leading-order equations are solved numerically by means of both an adaptive finite difference method which maps the curvilinear geometry of the jet onto a unit square and a fourth-order-accurate Runge–Kutta technique. It is shown that the fluid dynamics of steady, annular liquid jets is very sensitive to the Froude and Weber numbers and nozzle exit angle in the presence of non-homogeneous, conservative body forces. For upward jets with inwardly or axially directed velocities at the nozzle exit the effect of the non-homogeneous, conservative body forces is to increase the leading-order axial velocity component, decrease the jet's mean radius and move the stagnation point downstream. For downward jets with radially outward velocity at the nozzle exit the axial velocity component decreases monotonically as the magnitude of the non-homogeneous, conservative body forces is increased.     

湿空气扩散燃烧火焰结构特性研究

利用二维粒子成像速度仪(PIV)对钝体燃烧器中的甲烷／湿空气扩散燃烧的速度场进行测量,考察其火焰的结构特性及其内部流动状况。通过对湿空气燃烧流场与普通燃烧流场的对比分析表明,湿空气燃烧情况下,两种燃烧状态的火焰(回流燃烧火焰和中心射流主导火焰)相互转换的燃空速度比(γ)值要比普通燃烧的小;湿空气燃烧使得喷嘴后的同流空气的速度降低,空气的回流作用减弱,燃料更容易冲出回流区,火焰的稳定性能变差。     

黄芪中微量元素的形态分析

按照传统煎煮法对中药黄芪中铜、锌、铁、镁、钙和铬6种元素进行提取;用微孔滤膜分离提取液中的可溶态与悬浮态;利用大孔吸附树脂柱对可溶态中的有机态与无机态进行分离;采用火焰原子吸收光谱法对各种形态中的6种元素进行测定。结果显示:黄芪中6种元素的总提取率在44.0%~74.4%,浸留比在79·4%~293.8%,悬浮态颗粒吸附率在10%左右,可溶态中铬的有机态与无机态的比例为114.6%,铜、锌、铁、镁、钙的有机态与无机态的比例在3.7%~43.5%。该法对各元素的加标回收率在96.8%~103.1%;相对标准偏差小于1.5%。     

Comparison Studies on Several Ligands Used in Determination of Cd(II) in Rice by Flame Atomic Absorption Spectrometry after Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction

Ligands plays an important role in the extraction procedures for the determination of cadmium in rice samples by using flame atomic absorption spectrometry (FAAS). In the present study, comparative evaluation of 10 commercially available ligands for formation of Cd(II)-ligand complex and determination of cadmium in rice samples by ultrasound-assisted dispersive liquid–liquid microextraction (UADLLME) combined with FAAS was developed. Sodium diethyldithiocarbamate (DDTC) provided a high distribution coefficient as well as a good absorbance signal, therefore DDTC was used as a ligand in UADLLME. A low density and less toxic solvent, 1-heptanol, was used as the extraction solvent and ethanol was used as the disperser solvent. In addition, the experimental conditions of UADLLME were optimized in standard solution first and then applied in rice, such as the type and volume of extractant and dispersant, pH, extraction time, and temperature. Under the optimal experimental conditions, the detection limit (3σ) was 0.69 μg/L for Cd(II). The proposed method was applied for the determination of Cd(II) in three different rice samples (polished rice, brown rice, and glutinous rice), the recovery test was carried out, and the results ranged between 96.7 to 113.6%. The proposed method has the advantages of simplicity, low cost, and accurate and was successfully applied to analyze Cd(II) in rice.     

Construction of a Chemical Kinetic Model of Five-Component Gasoline Surrogates under Lean Conditions

The requirements for improving the efficiency of internal combustion engines and reducing emissions have promoted the development of new combustion technologies under extreme operating conditions (e.g., lean combustion), and the ignition and combustion characteristics of fuels are increasingly becoming important. A chemical kinetic reduced mechanism consisting of 115 species and 414 elementary reactions is developed for the prediction of ignition and combustion behaviors of gasoline surrogate fuels composed of five components, namely, isooctane, n-heptane, toluene, diisobutylene, and cyclohexane (CHX). The CHX sub-mechanism is obtained by simplifying the JetSurF2.0 mechanism using direct relationship graph error propagating, rate of production analysis, and temperature sensitivity analysis and CHX is mainly consumed through ring-opening reactions, continuous dehydrogenation, and oxygenation reactions. In addition, kinetic parameter corrections were made for key reactions R14 and R391 based on the accuracy of the ignition delay time and laminar flame velocity predictions. Under a wide range of conditions, the mechanism’s ignition delay time, laminar flame speed, and the experimental and calculated results of multi-component gasoline surrogate fuel and real gasoline are compared. The proposed mechanism can accurately reproduce the combustion and oxidation of each component of the gasoline-surrogate fuel mixture and real gasoline.     

Kirchhoff动力学比拟对弹性薄壳的推广

将弹性细杆的"Kirchhoff动力学比拟"方法推广到弹性薄壳,使弹性薄壳的变形在物理概念上和刚体的运动对应,在数学表述上等同,从而可以用刚体动力学的理论和方法研究弹性薄壳的变形,为连续的弹性薄壳提供新的离散化方法.在直法线假设下,在弹性中面上构筑空间正交轴系,此轴系沿坐标线"运动"的角速度构成两自变量的弯扭度.沿两个...