Read and write processes, and head technology for perpendicular recording

In this paper, we present a review of the write and read processes in perpendicular magnetic recording. We also discuss their impact, based on recording physics aspects, on design considerations for writers and readers. For the write process, we discuss fundamental write-ability limitations as well as possible paths to ultra-high areal density perpendicular recording. The impacts of different medium designs, geometrical scaling, and the breakdown of scaling, both in terms of write-ability and transition curvature, are shown based on different modeling techniques, including analytical formulas, finite element modeling (FEM), and micromagnetic simulations. Basic design rules as well as alternative designs that enable high areal density are briefly explained. For the read-back process, the relation between reader signal to noise ratio (SNR) and resistance, as well as reader resistance shunt and spacing loss, are discussed. Finally, we use a simple example to illustrate, both from a write as well as a read-back perspective, the complicated nature of perpendicular recording systems, and how different medium designs impact recording head technology for ultra high density perpendicular recording.     

Detrended cross-correlation analysis of electroencephalogram

In the paper we use detrended cross-correlation analysis (DCCA) to study the electroencephalograms of healthy young subjects and healthy old subjects. It is found that the cross-correlation between different leads of a healthy young subject is larger than that of a healthy old subject. It was shown that the cross-correlation relationship decreases with the aging process and the phenomenon can help to diagnose whether the subject's brain function is healthy or not.     

增压输送过程中卧式贮罐液氢温度分层研究

分析了大型卧式液氢贮罐增压输出过程中低温介质传热数学模型,揭示了贮罐内液氢温度分布规律,说明了液氢温度分层形成的原因及过程,给出了输出液氢品质保障方法。研究表明:大型卧式液氢贮罐输出过程中液氢温度分布可用修正后的半无限大平板非稳态导热方程描述;在增压压力一定情况下,热液层厚度随着输送时间的增加而增大,且热液层厚度及其温度分布受卧式贮罐截面形状影响;液氢贮罐输出品质与贮罐内热液层厚度密切相关,可通过计算热液层厚度从而确定贮罐留底余量的方法,保证贮罐输出品质。     

The 7Li (n,γ)8Li radiative capture at astrophysical energies

The possibility to construct intercluster interaction potentials in continuous and discrete spectra is shown in one‐channel cluster model based on the classification of orbital states according to Young schemes. These potentials usually contain Pauli forbidden states, and correctly describe elastic scattering phase shifts taking into account resonance behavior and main characteristics of the bound states of nuclei in the considering cluster channel. The versions of intercluster interaction potentials describing the resonance nature of some phase shifts of the n⁷Li elastic scattering at low energies and the P₂ ground state of ⁸Li in the n⁷Li cluster channel have been constructed for the demonstration of this approach. The possibility of describing the total cross sections of ⁷Li (n,γ)⁸Li within the energies from 5 meV (5 · 10^‐3 eV) to 1 MeV, including resonance at 0.25 MeV, has been demonstrated for the potentials obtained in the potential cluster model with forbidden states.     

多种通信手段在遇险救生体系中的应用研究

我国海域辽阔,各类船只的水上航行和作业安全密切关系到生命和财产的安全,需要可靠保障。由于海上险情发生的随机性和突发性,岸上险情监视力量必须全时、全天候地开设险情通信通道,接收海上遇险对象的遇险呼救信号并及时对遇险信息进行处理。因此,岸基必须建设遇险救生信息系统并规定必要的信息传输流程,保障险情报知通信的顺利完成。文章简要分析了目前海上救生的通信现状,对常用通信手段进行了分析与介绍,并提出了一种整合各通信手段的设计方法,实现了多种通信手段的综合使用以及统一调度,大幅提升险情信息的传输和处理效率,提高险情信息的保密性,为救援工作提供了精确可靠的问责手段。     

Preparation of barium hexaferrite nanopowders by the sol-gel method, using goethite

A series of barium hexaferrite nanoparticles (BaO·nFe₂O₃) with different n values were prepared by the sol-gel method, using goethite and Ba carbonate as raw materials. Phase identification of the samples was investigated by X-ray diffraction (XRD). XRD investigations show that the samples with n=5 and calcined at temperatures higher than 875 °C are single-phase Ba ferrite. An average crystallite size of 22 nm was obtained for the single-phase sample with minimum calcining temperature of 875 °C, using the Scherrer's formula. The morphology of the samples was checked by transmission electron microscope (TEM) and magnetic properties were measured by a sensitive permeameter. The results show that the samples have nonzero coercivities, which shows the particle size are not less than the critical size of Ba ferrite and then are not superparamagnet.     

极化子效应对ZnS/CdSe量子点三阶极化率的影响

在有效质量近似下,利用量子力学的密度矩阵理论,采用无限深势阱模型,从理论上计算了考虑极化子效应后在导带子带间跃迁时ZnS/CdSe柱型核壳结构量子点二次电光效应(QEOE)和电吸收过程(EA)的三阶极化率。通过数值计算,分析了电子-LO声子和电子-IO声子相互作用对ZnS/CdSe柱型核壳结构量子点二次电光效应和电吸收过程的三阶极化率的影响。结果表明,极化子效应对二次电光效应的三阶极化率χ⁽³⁾_QEDE和电吸收过程的三阶极化率χ⁽³⁾_EA都有很大影响,并且影响的大小与量子点的尺寸大小有关。     

基于神经网络的电火花线切割工艺目标建模

利用BP神经网络技术建立了电火花线切割加工工况参数与工艺目标间的预测模型.以脉冲宽度、脉冲间隙、峰值电流、间隙电压及工件厚度等工况参数为网络输入,加工效率和表面粗糙度等工艺目标为网络输出,通过用样本数据对网络的训练,实现了对工艺目标的预测.试验结果表明:所建预测模型能较好地反映线切割机床的工艺规律,实现对指定切割条件下加工效率和表面粗糙度的预测,最大预测误差小于10%.     

La-Ce-TiO2纳米光催化剂的溶胶-微波法合成、谱学表征及其活性研究

以钛酸四丁酯为原料,采用溶胶-微波法(Sol-Microwave Method)合成了镧和铈共掺型纳米TiO2粉体(La-Ce-TiO2),借助XRD、XPS和UV-Vis等测试手段对其进行了表征,并以甲基橙为模型污染物考察了掺杂量对样品光催化活性的影响规律.XRD分析表明,所得粉体均为锐钛矿相纳米TiO2,且稀土元素镧和铈掺杂后纳米TiO2特征衍射峰宽化,强度降低;XPS分析表明,镧和铈掺杂后样品表面存在大量的氧缺位;UV-Vis吸收光谱表明,所得粉体在400 nm以下均有连续宽化的吸收带,且La和Ce掺杂后样品对光的吸收显著增强,这足由于La(Ⅲ)-O荷移跃迁以及Ce(Ⅳ)f→d跃迁和Ce(Ⅳ)-O荷移跃迁所致;光催化实验表明,La和Ce共掺杂能显著提高纳米TiO2的光催化活性,其中当La(Ⅲ)和Ce(Ⅳ)掺杂量分别为2%和0.04%时,纳米TiO2光催化剂具有较高的催化活性,自然光照射下光催化氧化处理卷烟厂蒸叶车间废水,效果较好,废水COD去除率达到86.11%.     

On radar accuracy using beam wave in random media

The accuracy of radar detection is measured in this paper through comparing the laser radar cross-section (LRCS) to RCS data for plane-wave incidence in free space. This is to study the performance of backscattering enhancement from conducting targets with finite size. LRCS is calculated using beam wave incidence propagating in a random medium. Targets are of large size with relatively complex cross-sections. E-wave polarization is assumed for incident waves in continuous random media with different spatial coherency.