利用同步荧光光谱快速鉴别潲水油

为快速鉴别潲水油,采用三维同步荧光光谱结合平行因子法解析潲水油的特征波长差(Δλ),并利用支持向量机建立潲水油鉴别模型。结果表明,潲水油的特征Δλ为60 nm;特征Δλ下的样品原始同步荧光光谱经过主成分分析提取5个主成分,以径向基函数(RBF)为核函数,利用网格搜索和6-fold交叉验证优化建模参数,得到惩罚因子C=512、核参数g=0.5,该条件下建立的模型对训练集和预测集的判别率均达到100%。采用同步荧光光谱可以快速、准确地鉴别潲水油。     

Study on parameters influencing analytical performance of laser-induced breakdown spectroscopy

Lens-to-sample distances, delay time, atmospheric condition, laser pulse energy, etc. had obvious effects on the analytical performance of laser-induced breakdown spectroscopy. In this paper, these parameters are investigated in greater detail and we will explain how they have influences on the analytical performance. The results show that the focal plane under the sample surface can improve precision and detection limit, and the delay time should be decided according to sensitivity and accuracy. Spectral line intensity is stronger in argon than helium, nitrogen and air gas environment. Pulse energy should exceed energy threshold (about 50 mJ) which can generate plasma, and the energy should not exceed about 300 mJ to avoid plasma shielding. Under optimum parameters, concentration relative standard deviation of C, Si, Mn, P, S, Ni, and Cr for low-alloyed steel (sample number 11278) which were measured 11 times is 2.37%, 2.18%, 2.23%, 7.8%, 9.34%, 1.92%, and 2.13%, respectively. And the detection limit of C, Si, Mn, P, S, Ni, and Cr for pure steel is 0.0045%, 0.0072%, 0.0069%, 0.0027%, 0.0024%, 0.0047%, and 0.0024%, respectively.     

窗口可变滑动相关分析方法在激光诱导击穿光谱谱线自动识别中的应用

激光诱导击穿光谱(LIBS)谱线具有很窄的展宽,且光谱仪因外界温度条件的变化存在波长漂移,光谱数据为离散数字信号,受噪声、谱线重叠及连续背景的影响,信号存在失真和变形。而目前光谱仪自带谱线识别分析软件主要以"就近原则"为主,错误率较高,必须依赖于人眼的观察对比。针对这个问题,在研究LIBS光谱特性的基础上,提出了一种窗口可变滑动相关分析方法(CAASW),用于激光诱导击穿光谱谱线自动识别。以土壤标准物质为样品,对该方法进行了实验分析和评价,与光谱仪自带分析识别软件相比,CAASW明显提高了识别准确率和识别速度,最终实现了谱线的自动识别。     

金属网栅法布里珀罗干涉仪测量太赫兹波波长

设计并制作了用于测量波长大于150 μm(频率低于2 THz)的太赫兹波波长的金属网栅法布里珀罗干涉仪(FPI)。采用光电子微纳制造工艺制作了五组周期不大于40 μm,线宽不大于10 μm的有衬底方形金属网栅,利用太赫兹时域光谱技术测量了金属网栅的太赫兹波段光电特性,得到了各组金属网栅在感兴趣频段的反射率和金属网栅FPI的反射精细度,结果表明所制作的金属网栅FPI均可用于测量波长大于150 μm的太赫兹波。实验搭建金属网栅FPI扫描测量了212 μm的太赫兹波波长,与理论结果吻合。研究了金属网栅FPI对太赫兹波偏振方向的依赖性以及对FPI腔镜平行度的要求,结果表明,方形金属网栅FPI对正入射太赫兹波偏振方向不敏感,而对FPI腔镜平行度很敏感。     

Improved GaSb surfaces using a (NH4)2S/(NH4)2S04 solution

Bulk (1 0 0) n-GaSb surfaces have been treated with a sulphur based solution ((NH₄)₂S/(NH₄)₂SO₄) to which sulphur has been added, not previously reported for the passivation of GaSb surfaces. Au/n-GaSb Schottky barrier diodes (SBDs) fabricated on the treated material show significant improvement compared to that of the similar SBDs on the as-received material as evidenced by the lower ideality factor (n), higher barrier height (?_b) and lower contact resistance obtained. Additionally, the reverse leakage current, although not saturating, has been reduced by almost an order of magnitude at −0.2 V. The sample surfaces were studied by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The native oxide, Sb–O, present on the as-received material is effectively removed on treating with ([(NH₄)₂S/(NH₄)₂SO₄]+S) and (NH₄)₂S. Analysis of the as-received surface by XPS, prior to and after argon sputtering, suggests that the native oxide layer is ≤8.5 nm.     

Photoinduced decarboxylation of 9‐oxo‐6,9‐dihydro[1,2,5]selenadiazolo[3,4‐f]quinoline‐8‐carboxylic acid

Photoinduced reactions of 9‐oxo‐6,9‐dihydro[1,2,5]selenadiazolo[3,4‐f]quinoline‐8‐carboxylic acid (SeQCA) were investigated in alkaline media (aqueous NaOH solutions) by electron paramagnetic resonance (EPR) spectroscopy, following the in situ formation of paramagnetic species. According to UV–Vis and nuclear magnetic resonance investigations, protonation (pH ≈ 11) and deprotonation (pH ≈ 13) of the imino hydrogen of the 4‐pyridone moiety has to be considered, reflected also in the different EPR spectra observed upon irradiation. Photoinduced generation of radicals was found only for carboxylate substituted SeQCA; other studied selenadiazoloquinolone derivatives, together with those substituted at the C(8) position (R = H, COOCH₂CH₃, COOCH₃, COCH₃ or CN), did not generate paramagnetic species during exposure. Consequently, photodecarboxylation was suggested as the decisive step, accompanied by the decomposition of the selenadiazole ring, resulting in the formation of ortho‐hydroxylate anions. EPR parameters elucidated from experimental EPR spectra obtained at pH ≈ 11 and pH ≈ 13 indicate the formation of oxygen‐centered radicals at the decarboxylated 4‐pyridone ring. EPR spin trapping experiments with nitromethane confirmed a very effective photoinduced electron transfer from all the selenadiazoloquinolones investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

Particle Size Characterization of an Extra Fine Milled Product

The present research aims to characterize the particle size distribution of sub micron particles suspended in a liquid. The particles milled are an organic poorly water soluble crystalline product. To characterize the size of these particles, different techniques have been tested: imaging techniques (SEM, CryoTEM), static light scattering techniques, dynamic light scattering techniques, centrifugation and flow field flow fractionation. The results indicate that the studied milled particles have a primary particle size close to 180nm and there is strong evidence of larger particles which are very likely aggregates. This is clearly seen from the Cryo TEM results. All the above mentioned techniques should in principle be able to measure samples of dispersion containing particles of ca 180 nm but several are disturbed by the presence of large aggregates. It is difficult to estimate the amount of aggregate present, but most of the time one is interested in what the primary particle size distribution is. It is clear that no single piece of equipment is capable of exactly determining the particle size distribution of our samples, but the static light scattering with low shear on mixing does give a good representation of what is seen with the image analysis by cryo TEM.     

Temperature dependence of the Raman spectra of Bi2Te3 and Bi0.5Sb1.5Te3 thermoelectric films

The temperature dependence of the Raman spectra of Bi₂Te₃ and Bi_0.5Sb_1.5Te₃ thermoelectric films was investigated. The temperature coefficients of the E_g(2) peak positions were determined as –0.0137 cm^–1/°C and –0.0156 cm^–1/°C, respectively. The thermal expansion of the crystal caused a linear shift of the Raman peak induced by the temperature change. Based on the linear relation, a reliable and noninvasive micro‐Raman scattering method was shown to measure the thermal conductivity of the thermoelectric films. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Exploring the origin of tip‐enhanced Raman scattering; preparation of efficient TERS probes with high yield

Tip‐enhanced Raman scattering (TERS) spectroscopy is a promising technique for nanoscale chemical analysis. However, there are several challenges preventing widespread application of this technology, including reproducible fabrication of efficient TERS probes. These problems reflect a lack of clear understanding of the origins of, and the parameters influencing TERS. It is believed that the coating characteristics at the apex of the tip have a major effect on the near‐field optical enhancement and thus the TERS activity of a metalized probe. Here we show that the aspect ratio of the tip can play a significant role in the efficiency of TERS probes. We argue that the electrostatic field arising from the lightning‐rod effect has a substantial role in the observed TERS effect. This argument is supported by ‘edge‐enhanced Raman scattering’ which is shown for a noble metal film. Furthermore, it is reported that an associated tip‐surface‐enhanced Raman scattering effect can be achieved by using a TERS‐inactive metalized probe on a surface‐enhanced Raman spectroscopy‐inactive roughened surface. This observation can be explained by an interparticle enhancement of the electromagnetic field. Copyright © 2011 John Wiley & Sons, Ltd.     

Micro‐Raman study of exfoliated Bi2Sr2CaCu2O8+δ single crystals with different thicknesses

Exfoliated Bi₂Sr₂CaCu₂O_8+δ (Bi‐2212) single crystals were prepared by micromechanical cleavage of bulk Bi‐2212 single crystals on SiO₂/Si substrates. Room temperature micro‐Raman spectra were collected using a 532‐nm laser source. The evolutions of the spectra of A_1g (Bi), A_1g (Sr), and A_1g (O_Bi) Raman modes with different thicknesses of the samples were studied. The refractive index of Bi‐2212 single crystal was obtained by studying the intensity evolutions based on the interference effect. The observed wavenumber shifts of the A_1g (Bi), A_1g (Sr), and A_1g (O_Bi) modes were analyzed. Copyright © 2011 John Wiley & Sons, Ltd.