General criterion to discern between coherent and incoherent synthesis of broadband coherent anti‐Stokes Raman spectra

Recently, the ordinary qualitative criterion on how to distinguish between coherent and incoherent convolutions of broadband coherent anti‐Stokes Raman (CARS) signals generated by degenerate pump lasers has been revised in view of a quantitative analysis. The revision has established that incoherent CARS approach can be justified as unitary limit of the function ] erfc(Γ/σ₁)/σ₁, where Γ and σ₁ are respectively the spectral widths of the Raman line and the degenerate pump lasers. The result was, however, limited to nonoverlapping Raman lines. In this work, the extension to a more common situation of closely spaced Raman transitions is considered. For large overlap between adjacent Raman lines, the new analysis suggests significant deviations from the previous result. Weak line mixing is also taken into consideration. Nonetheless, all types of deviations are characterized by a common tendency toward the incoherent limit. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopy of halogen‐containing carbonates

Raman spectroscopy complemented with infrared spectroscopy has been used to study a series of selected natural halogenated carbonates from different origins, including bastnasite, parisite and northupite. The position of CO₃²⁻ symmetric stretching vibration varies with the mineral composition. An additional band for northupite at 1107 cm⁻¹ is observed. Raman spectra of bastnasite, parisite and northupite show single bands at 1433, 1420 and 1554 cm⁻¹, respectively, assigned to the ν₃ (CO₃)²⁻ asymmetric stretching mode. The observation of additional Raman bands for the ν₃ modes for some halogenated carbonates is significant in that it shows distortion of the CaO₆ octahedron. No ν₂ Raman bending modes are observed for these minerals. The band is observed in the infrared spectra, and multiple ν₂ modes at 844 and 867 cm⁻¹ are observed for parisite. A single intense infrared band is found at 879 cm⁻¹ for northupite. Raman bands are observed forthe carbonate ν₄ in‐phase bending modes at 722 cm⁻¹ for bastnasite, 736 and 684 cm⁻¹ for parisite and 714 cm⁻¹ for northupite. Multiple bands are observed in the OH stretching region for selected bastansites and parisites, indicating the presence of water and OH units in the mineral structure. The presence of such bands brings into question the actual formula of these halogenated carbonate minerals. Copyright © 2007 John Wiley & Sons, Ltd.     

Precise measurement of hyperfine structure in the state of Rb

We demonstrate a technique to measure hyperfine structure using a frequency-stabilized diode laser and an acousto-optic modulator locked to the frequency difference between two hyperfine peaks. We use this technique to measure hyperfine intervals in the 5 P _3/2 state of ⁸⁵Rb and obtain a precision of 20 kHz. We extract values for the magnetic-dipole coupling constant A = 25.038(5) MHz and the electric-quadrupole coupling constant B = 26.011(22) MHz. These values are a significant improvement over previous results. Received 6 March 2003 Published online 15 April 2003     

Polystyrene Microspheres in Tissue-Simulating Phantoms Can Collisionally Quench Fluorescence

Tissue-simulating phantoms that replicate intrinsic optical properties in a controlled manner are useful for quantitative studies of photon transport in turbid biological media. In such phantoms, polystyrene microspheres are often used to simulate tissue optical scattering. Here, we report that using polystyrene microspheres in fluorescent tissue-simulating phantoms can reduce fluorophore quantum yield via collisional quenching. Fluorescence lifetime spectroscopy was employed to characterize quenching in phantoms consisting of a fluorescein dye and polystyrene microspheres (scattering coefficients _s 100-600cm^–1). For this range of tissue-simulating phantoms, analysis using the Stern-Volmer equation revealed that collisional quenching by polystyrene microspheres accounted for a decrease in fluorescence intensity of 6-17% relative to the intrinsic intensity value when no microspheres (quenchers) were present. The intensity decrease from quenching is independent of additional, anticipated losses arising from optical scattering associated with the microspheres. These results suggest that quantitative fluorescence measurements in studies employing such phantoms may be influenced by collisional quenching.     

Solvent Relaxation in Phospholipid Bilayers: Principles and Recent Applications

Although there exist a number of methods, such as NMR, X-ray, e.g., which explore the hydration of phospholipid bilayers, the solvent relaxation (SR) method has the advantage of simple instrumentation, easy data treatment and possibility of measuring fully hydrated samples. The main information gained from SR by the analysis of recorded “time-resolved emission spectra” (TRES) is micro-viscosity and micro-polarity of the dye microenvironment. Based on these parameters, one can draw conclusions about water structure in the bilayer. In this review, we focus on physical background of this method, on all the procedures that are needed in order to obtain relevant parameters, and on the requirements on the fluorescence dyes. Furthermore, a few recent applications (the effect of curvature, binding of antibacterial peptides and phase transition) illustrating the versatility of this method are mentioned. Moreover, limitations and potential problems are discussed.     

Chemical reduction of hematite by sodium borohydride

Well-crystallized hematite was suspended in water and treated at room-temperature (RT) with sodium borohydride. The product of the reaction is a highly magnetic black powder, which is stable at RT. The NaBH₄ treatment converts about half of the hematite to an amorphous Fe–B alloy and to a small fraction of sub-micron sized, amorphous metallic-Fe nodules. Heating at 400°C of this composite has resulted in the crystallization and/or oxidation of more than half of the amorphous Fe–B phase to α-Fe and Fe₃O₄ and B₂O₃, respectively. After treatment at 800°C, the metallic Fe and the amorphous Fe–B have completely vanished, and the resulting product consists of hematite and FeBO₃ embedded in the matrix of α-Fe₂O₃.     

ILEEMS: Methodology and Applications to Iron Oxides

ILEEMS is the acronym for Integral Low-energy Electron Mössbauer Spectroscopy. In this variant of Mössbauer spectroscopy the low-energy electrons, E < ～15 eV, emitted by the probe nuclei in the absorber are counted as a function of source velocity. As a consequence of their low energy, the detected electrons' origin lies within a very thin surface layer with thickness of a few nanometers and consequently, ILEEMS is a useful technique to examine surfaces of Fe-containing substances. In a first part of this paper the authors briefly describe the design of a home-made ILEEMS equipment allowing the temperature of the investigated sample to be varied between 77 K and room temperature. The second part of this contribution deals with a selection of results obtained from ILEEMS spectra for various Fe oxides. In particular, the following items are covered: (1) surface versus bulk Morin transition in small-particle and near-bulk hematite, α-Fe₂O₃; (2) bulk and thin-film magnetite, Fe₃O₄; (3) ferrihydrite, 5Fe₂O₃·9H₂0, goethite, α-FeOOH, and lepidocrocite, γ-FeOOH, all to some extent in relation to their morphology. Interesting and intriguing findings concerning the surface properties of these oxides were obtained and it is argued that the results encourage more systematic research in this and related fields using the surface-sensitive ILEEMS technique.     

Optical phonon modes and structure of ZnGa2Se4 and ZnGa2S4

We present the infrared and Raman study of the optical phonon modes of the defective compounds ZnGa₂Se₄ and ZnGa₂S₄. Most of the compounds have been found to crystallize in the thiogallate structure (defect chalcopyrite) with space group where all cations and vacancies are ordered. For some Zinc compounds a partially disordered cationic sublattice with various degrees of cation and vacancy statistical distribution, which lead to the higher symmetry (defect stannite), has been reported. For ZnGa₂Se₄ we have found three modes of A symmetry, showing Raman activity only. In addition, we have observed each five modes of B and E symmetry, showing infrared as well as Raman activity. The number of modes and their symmetry assignment, based on polarized measurements, clearly indicate space group for the investigated crystals of ZnGa₂Se₄.Regarding ZnGa₂S₄ we have found three modes exclusively showing Raman activity (2A⊕1B₁), and only eight modes showing infrared as well as Raman activity (3B₂⊕5E). The assignment of the modes has been derived by analyzing the spectral positions of the vibrational modes in comparison to a number of compounds. From the number and symmetry assignment of the optical phonon modes we confirm that ZnGa₂S₄ most likely crystallizes in space group .     

Growth process and structure of Fe/Si(1 1 1) ultrathin film: Transition from single-domain Fe(1 1 1)/Si(1 1 1) to β-FeSi2

The growth processes and structures of Fe/Si(1 1 1) ultrathin films grown by solid-phase reactive epitaxy were investigated by coaxial impact-collision ion scattering spectroscopy (CAICISS). It has been revealed that the Fe(1 1 1) thin films with a bcc-type structure were epitaxially grown on a Si(1 1 1) crystal, even at room temperature, and formed a single-domain structure: Fe(1 1 1)∥Si(1 1 1). After annealing at above 600 °C, the Fe(1 1 1) films were transformed into β-FeSi₂ via the collapse of the bcc-type structure to an amorphous or polycrystalline structure. On the basis of the thickness dependences of the growth processes, this phenomenon was discussed in terms of the diffusion of Si into Fe thin films.     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.