数字散斑相关方法及其在碳纤维复合材料压力容器变形测量中的应用

提出了一种新的基于图像灰度梯度迭代的数字散斑相关方法(DSCM,digital speckle correlation method)。通过使用DSCM测量碳纤维复合材料压力容器在水压下的局部区域的位移场和应变场,分析了复合材料压力容器的轴向和环向的变形特征,为碳纤维复合材料压力容器的优化设计提供了理论和实验依据。     

平面应力条件下闭合断续节理岩体力学特性试验研究

通过平面应力条件下闭合断续节理岩体的破坏试验,采用自行研制的高压柔性加载装置施加垂向和侧向荷载,用千分表和激光散斑照相技术量测试体位移场,用应变花量测试体平面应力场． 结果表明,激光散斑法用于测定闭合断续节理岩体的位移场效果良好,其测值比对应点千分表测值偏小１４％ 左右．据所测得的位移场和应力场,研究了裂纹尖端应力场的演变及裂纹扩展的路径,分析了试体的变形和破坏特征,测定了翼裂纹初裂角,探讨了试体的破坏机理．     

花岗岩单轴压缩侧向变形及脆性破坏机制实验研究

为研究花岗岩侧向变形及脆性破坏机制,对花岗岩试件进行单轴压缩实验。利用动态应变采集系统、数字散斑相关方法(DSCM)和显微观测手段,记录并分析花岗岩试件在单轴压缩过程中的宏观侧向应变、局部侧向应变以及破裂面形貌,并与水泥砂浆试件的破坏过程对比,讨论了花岗岩脆性破坏机制。实验与分析结果表明:(1)花岗岩试件在加载初期发生侧向收缩变形,产生并发展于压密阶段,消失于线弹性阶段初期,这主要由于试件内部裂纹闭合造成的;此后,宏观侧向应变持续增长,当侧向应变与轴向应变之比接近0.5时试件破坏;(2)在峰值载荷前很长一段时间内,局部侧向应变在一定范围内波动,临近试件破坏时局部侧向应变最大值和最小值均出现较大幅度的波动,二者差值迅速增大,试件不均匀程度增大,最终导致试件破坏;(3)在峰值载荷前有无塑性屈服阶段是峰值载荷后脆性破坏程度的重要影响因素,而宏观裂纹的贯通程度是峰值载荷后应力降大小的决定因素。     

中国科大光力学工作进展

中国科学技术大学光力学实验室近年从事实验力学方法在红外成像、金属物理学以及生化传感等交叉领域的研究，为实验力学带来了新的研究内容，也为相关领域的研究开辟出独特的途径。本文拟对该小组近年来取得的研究进展作一个概述：1）提出微梁阵列FPA变形的高灵敏光学检测法，设计制作出相应的FPA，实现了新概念光学读出红外成像，热成像指标处于国际领先；2）提出用动态散斑研究合金材料锯齿形屈服剪切带，建立了溶质原子与位错交互作用的动态应变时效模型，再现出锯齿形加载曲线和带反复传播的轨迹；3）提出用微梁传感研究大分子／蛋白质构象折叠，检测到构象转变过程中分子间力的相互作用信息和折叠动力学过程，为研究大分子折叠机理提供了一种新途径。     

基于单幅数字散斑投影及图像相关的离面振动测量

采用单幅数字散斑图投影及高速数字图像采集技术,研究了动态离面位移的测量。采用商用液晶投影仪将计算机产生的模拟散斑图投影到待测动态变形物体表面,由高速数字图像采集设备摄取并保存变形散斑图,采用时间序列数字图像相关软件计算出物体表面各点随时间变化的离面位移。这种方法用于振动分析时不仅可以获得振型分布,而且还可以获得各点的振幅值。与现有的激光频闪照相测振及激光多普勒测振等方法相比,具有光学系统简单,可全场定量测量。悬臂梁振动实验结果证实了该方法的有效性。     

Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system

Full field laser Doppler imaging (LDI) and single exposure laser speckle contrast imaging (LSCI) are directly compared using a novel instrument which can concurrently image blood flow using both LDI and LSCI signal processing. Incorporating a commercial CMOS camera chip and a field programmable gate array (FPGA) the flow images of LDI and the contrast maps of LSCI are simultaneously processed by utilizing the same detected optical signals. The comparison was carried out by imaging a rotating diffuser. LDI has a linear response to the velocity. In contrast, LSCI is exposure time dependent and does not provide a linear response in the presence of static speckle. It is also demonstrated that the relationship between LDI and LSCI can be related through a power law which depends on the exposure time of LSCI.     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.     

孔径旋转频闪散斑照相法测量物体的固有频率

提出了一种测量物体固有频率的新方法－－孔径旋转频闪散斑照相法。该方法能方便地测量振动物体的固有频率，具有精度高、全场显示、条纹可见度好等优点，给出了理论分析和实验结果。     

Novel quantitative non-destructive testing method for composite structures

A novel QNDT (quantitative non-destructive testing) method is developed that is combined with a phase-shifting shearing speckle and thermograph, and, it aims at the detection of faults such as cracks, voids, delamination and weak areas. The technique is immune to ambient noise and is suitable for measuring the in situ environment. Some different depth defects that would produce deformation differing from other positions could be found with shearing speckle when the sample is loaded, however, a thermograph based on the thermal resistance effect of a defect can detect only those varisized defects embedded deeply in the composite structure by measuring the surface temperature distribution. The resolution is examined for artificial delaminated defects in carbon-fiber composite structures using a phase-shifting shearing speckle and thermograph. The experimental results have demonstrated that the technique is effective for revealing defects in composite structures.     

相移测量技术中相移器研究

本文介绍一种用于相移测量技术的相移器。该相移器由计算机通过Ｄ／Ａ接口板自动控制输出电压幅度，其电路采用闭环控制，位移由压电晶体产生，具有很高的电压稳定度（０１％）和较小的相移误差（小于３°）。描述相移器的结构、驱动源工作原理及相移器标定方法