Electronic speckle pattern interferometry analysis of tensile tests of semihard copper sheets

Uniaxial tension tests of semihard copper sheets were studied by means of electronic spekle pattern interferometry (ESPI). The setup allowed the authors to analyze in detail the transitions from elastic to plastic behavior and from homogeneous to inhomogeneous plastic deformation. In agreement with the conventional definition of the yield point for copper fully plastic behavior starded at permanent strains close to 0.005. The strain-hardening coefficient was very low at the early stage of plastic flow (“easy glide”), increasing progressively until values on the order of 0.13 to 0.14 were reached at maximum load. A this point, the appearance of unequally spaced fringes signaled the beginning of inhomogeneous deformation. With ESPI, this occurrence may thus serve as a criterion to establish the forming limit of the material.     

‘Best-case’ noise performance of feedback interferometers, potential for micromachine applications

We present a theoretical analysis of the noise performance of phase measuring feedback interferometers. We first analyse the operation of this kind of instrument and note that under certain circumstances bistability can occur. The bistable region should be avoided if possible when using feedback interferometry for high-accuracy measurement with low-input powers, as it can give rise to very high-noise levels. We then go on to investigate the effects of shot noise (on the interferometer output signal) and thermal noise (in the feedback loop), and relate these to the phase measurement accuracy of the interferometer. A ‘best-case’ calculation indicates that phase noise of about 0.005λ is possible at input powers in the nanowatt region. In practice, we expect that noise levels will be higher than predicted (particularly at high-input powers) due to the effects of vibration and air turbulence.     

A semi-automatic method for measuring interferometry fringes: prototype design and first results

A device for automatically obtaining the information contained in holographic interferometry fringes is proposed. The method may be applied to any kind of interferometric fringes. Accuracy has been demonstrated by contrasting the results obtained with our prototype system and those with the single-beam speckle interferometry technique for the measurement of displacements in a plane. The results show good correlation between the two series of measurements.     

Non-contacting laser based displacement measurements from solid objects

This note reports a laser Doppler interferometer for measuring the axial motion of solid targets which have had no prior preparation. Both magnitude and sense of motion are measured to a resolution at least 0.316 μm usinga passive optical system and simple signal processing, making the device relatively cheap to construct. Results indicate that the LDI is capable of good linearity over a substantial range of target amplitudes and has a reasonable degree of immunity from speckle effects.     

Entanglement and Non-Locality in Quantum Protocols with Identical Particles

We study the role of entanglement and non-locality in quantum protocols that make use of systems of identical particles. Unlike in the case of distinguishable particles, the notions of entanglement and non-locality for systems whose constituents cannot be distinguished and singly addressed are still debated. We clarify why the only approach that avoids incongruities and paradoxes is the one based on the second quantization formalism, whereby it is the entanglement of the modes that can be populated by the particles that really matters and not the particles themselves. Indeed, by means of a metrological and of a teleportation protocol, we show that inconsistencies arise in formulations that force entanglement and non-locality to be properties of the identical particles rather than of the modes they can occupy. The reason resides in the fact that orthogonal modes can always be addressed while identical particles cannot.     

Phase-stepped ESPI and moiré interferometry for measuring stress-intensity factor andJ integral

Electronic-speckle-pattern interferometry and moiré interferometry have been used to calculateK ₁ andJ for compact tension specimens. Automated-fringe-pattern analysis enables the full-field of data to be used with the minimum of operator intervention. Measurements are shown to be accurate to within 10 percent. TheJ-measurement procedure employed could form the basis of an automatic-fault detection system.     

用白光相对客观散斑技术实测海冰力学性质的初探

本文提出了一种改进的白光散技术，应用此技术测量了单轴压缩下海冰的弹性模量，实测结果与电测法的结果符合程度良好，本文方法操作简单，避免了海水的表面缺隐和浸反射条件差以及表面升华等因素对测量的影响。     

夹层全息干涉法的残余应力测试

本文用夹层全息干涉法做了模拟残余应力的标定实验,测试了焊缝、铸件的残余应力,并且利用数值方法进行了定量分析,实验结果与理论值比较吻合。     

剪切散斑干涉与有限元优化计算相结合实现缺陷参数的定量求解

本文将剪切散斑干涉与有限元优化分析相结合，对薄壁压力容器缝缺陷进行了定量检测，通过对优化计算结果和已知的缺陷参数所构成的目标函数的求解，获得了较为精确的缺陷参数识别结果。     

Density-sensitive whole-field flow measurement by optical speckle photography

An optical whole-field, line-of-sight method is surveyed that allows the measurement of the refractive deflection angles of light transmitted through a flow with density changes. The method uses the principles of speckle photography. In comparison to classical optical methods such as interferometry, a much higher number of data values can be obtained from one record without the need of interpolating between experimental data. This high signal density is particularly advantageous for analyzing turbulent flows with density fluctuations. Such an analysis is, so far, restricted to the existence of axisymmetric turbulence. A number of applications to this type of turbulent flow are reported, and proposals are made for future developments that will allow this speckle technique to be applied to the study of turbulent shear flow.