DSC study of cold and heat denaturation processes of β-lactoglobulin A with guanidine hydrochloride

The cold and heat denaturations of bovine P-lactoglobulin A ((β-lg A) has been studied in solutions of guanidine hydrochloride (GuHCI) by differential scanning calorimetry (DSC). The experimental results are presented and discussed. It is shown that the number of protons bound by the monomeric molecules of β-lg A was unchanged before and after its heat denaturation below pH 3, and that the activation energy of the heat denaturation was depressed owing to the presence of GuHCI. In the solutions with 2.50 and 3.06 mol/L of GuHCI, both the cold and heat denaturations of P-lg A were observed. In comparison with the heat denaturation, the activation energy of cold denaturation was far lower and the number of GuHCl molecules bound by the unfolded polypeptide chains after culd denaturation increased a lot. The absolute value of the enthalpy of cold denaturation was larger than that of heat denaturation. It was found by the analysis that the contribution to the total denaturational enthalpy of conformational change itself of the monomeric molecules of β-lg A was the lowest among the globulins, according to the average of the number of heavy atoms. Project supported by the National Natural Science Foundation of China, and by the fund for excellent items under Director of the Institute of Chemistry.     

酞侧基聚芳醚酮的热学性能

酞侧基聚芳醚酮的热学性能谢红卫，李滨耀（中国科学院长春应用化学研究所长春１３００２２）关键词酞侧基聚芳醚酮，ｐｖＴ行为，导热系数，定压比热容酞侧基聚芳醚酮（ＰＥＫ－Ｃ）具有较高的玻璃化转变温度，其流变加工性能和力学性能已被广泛研究［１～３］，被证明是...     

Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

Synthesis and characterization of segmented liquid crystal poly(azoxy polyester-co-polyoxypropylene)

In this study a series of a segmented copolyester, poly(4,4′-dioxy-2,2′-dimethyl-azoxybenzene dodecanedioyl) (PMABD)-co-polyoxypropylene 400 (POP), was prepared. The chain length of PMABD studied (n) was varied from 7.8-18.2, and that of POP was unchanged. The intrinsic viscosity of the segmented copolyesters was 1.04-1.30, and the number average molecular weight obtained was 2.53 × 10⁴?3.49 × 10⁴ g/mol. The mesophase texture and thermal properties of the segmented copolyesters were measured as functions of n. It was found that the insert of flexible POP between those liquid crystalline domains of PMABD did affect thermotropic properties of PMABD. As the n value was 9.0 and 7.8 (or 7.4 and 8.6% by weight POP) the texture appeared as cholesteric-like oily streaks. The effect could not be attained by simply copolymerizing a mesogenic moiety with a pair of spacers of different lengths. The fluidity and domain structure of the flexible dodecanedioyl-POP-dodcanedioyl segments are taken into account for the obtained results. © 1995 John Wiley & Sons, Inc.     

利用大分子单体技术合成接枝共聚物

大分子单体和小分子共单体共聚是合成接枝共聚物的重要途径之一。本文综述了大分子单体通过各种聚合方式(自由基共聚、离子型共聚、配位共聚、基团转移共聚和逐步共聚)和普通小分子单体的共聚反应,详细讨论了大分子单体和小分子单体的自由基共聚反应动力学,并简要介绍了接枝共聚物的应用背景。     

The specific heat of the ferroelectric phase transition in N(CH3)4CdBr3

The specific heat of N(CH₃)₄CdBr₃ from 50 to 300 K has been measured by adiabatic calorimetry, using both static and dynamic methods. The obtained results have permitted a careful study of the ferro-paraelectric phase transition the crystal shows at 160 K. The available spectroscopic data have been used to generate a reliable baseline which accounts for the normal lattice contribution to the specific heat. These results allow for an accurate estimation of the phase transition thermodynamic functions: ΔH=2620 J·mol^?1 and ΔS=18.04 J·(mol°C)^?1. These high values are in agreement with the predictions of the 6 well potential Frenkel model.     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

Thermal conductivity of the urea-hexadecane inclusion compound

The thermal conductivity and the heat capacity per unit volumec _p have been measured for the urea-hexadecane inclusion compound using the transient hot-wire method. Measurements were made under isobaric conditions at a pressure of 0.1 GPa and in the temperature range of 100–300 K. There was evidence for a phase transition at a temperature of about 160 K, in reasonable agreement with previous work. For the high-temperature phase was independent of temperature within ±1%. The low-temperature phase showed a weak temperature dependence, with (d In/d InT) _p = –0.13. It was inferred that interaction between acoustic phonons and low-frequency vibrational excitations of the guest molecules made a major contribution to the thermal resistivity. For the quantityc _p a weak maximum was observed in the region of the phase transition temperature.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

Thermodynamic properties of lithium chloride ammonia complexes for application inahigh-lifthigh temperature chemical heat pump

Ammonia absorption by and desorption from lithium chloride at different pressures has been studied using high-pressure differential scanning calorimetry, for application in a high-lift high temperature chemical heat pump. The measurements were performed under isobaric as well as under isothermal circumstances. Clausius–Clapeyron plots were constructed and used to calculate the thermodynamic parameters and to determine the stability regions of the different complexes. Controversies in literature as to the real existing phases are resolved.     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.