制备高比表面积碳化硅的几种影响因素

采用溶胶凝胶法，以蔗糖和正硅酸乙酯(TEOS)为原料，草酸为TEOS水解的催化剂，制备均相碳化硅前驱体，在氩气氛和高温条件下(1 350～1 600 ℃)将碳化硅先驱体进行碳热还原，制备出高比表面积的SiC。考察了水/TEOS物质的量的比、碳/硅物质的量的比及镍盐等因素对碳化硅比表面积的影响。结果表明，当n_water/n_TEOS=7.5，n_C/n_Si=4时，适宜的镍催化剂(n_Ni/n_TEOS=0.005)，凝胶形成的时间最短，镍盐的加入可使碳热还原温度降低200 ℃。     

Heat conductivity of three periodic Hard Disks via nonequilibrium molecular dynamics

We use a driving field, of the type first suggested by Evans, to generate a steady heat current in the simplest possible system, a two-dimensional periodic fluid of three hard disks. Hard-disk motion equations can be conveniently derived from repulsive constant-force or linear-force potentials by considering the infinitely repulsive limit of these potentials. We show that the isoenergetic and isokinetic forms of the nonequilibrium equations of motion generate steady-state heat conductivities differing by terms of order 1/N, whereN is the number of particles. The resulting conductivities appear to vary as the logarithm of the driving field strength. Even at low fields, the three-body periodic-system results lie well below Enskog's infinite-system prediction.     

n型T'-214相超导体的结构和性质

T＇－214相化合物R2-xCexCuO4（R为稀土离子）成为超导体决定于R3+的离子半径大小、Ce4+的取代量和化合物的热处理时的稳定性．从Raman光谱实验结果提出热处理过程中发生电荷转移．Ce4+的取代引起TN（Cu）下降，当TN（Cu）降到0时，超导性出现。不同的稀土离子TN（Cu）不同，稀土离子的反铁磁性（AFM）与超导性（SC）共存。热电势的测量结果可以用双通道模型解释，n型超导体中电子与空穴共存．     

The thermodynamics of proton dissociation of adenine

The thermodynamic quantities associated with ionization of the N₁ and N₉ protons of adenine have been calorimetrically determined as a function of temperature. The H values for proton dissociation of these groups, with pK values of 4.19 and 9.92, were found to be 5.1 and 9.1 kcal/mole, respectively, at 25°C, =0.025. The C _p values for proton dissociation of these groups were estimated to be –11 and –17 cal/mole-deg. These results indicate that the large heat capacity changes observed during conformational transitions of polynucleotides are not the result of ionization of the bases.     

S-Shaped composition dependence of excess thermodynamic quantities for cyclohexane mixtures with globular alkanes

Expansion coefficients , isothermal compressibilities, thermal pressure coefficients and heat capacities have been measured at 25°C for the cyclohexane+trans-decalin system. An S-shaped composition dependence, positivelnegative for highllow cyclohexane compositions is found for C _p ^E dV ^E /dT and the thermal expansion contribution to C _p ^E namely VT. The thermal motion contribution to C _p ^E , namely C _v is close to zero. The positive excursion of these mixing quantities at high cyclohexane content is anomalous. Correspondingly, the mixing quantity-VT deviates strongly in this region from the predicted equality with H ^E . The literature and this work show that all these excess quantities behave similarly for cyclohexane mixed with cyclooctane, methylcyclohexane and some highly branched alkanes. The unusual composition dependence of the thermodynamic quantities is consistent with order occurring when any large alkane molecule of globular shape is added to cyclohexane. This is speculatively associated with an interference by the globular alkane with the relatively free rotation of cyclohexane molecules.     

New method for calculating the adsorption of noble gases on amorphous surfaces

A new approach to calculating the equilibrium characteristics of the adsorption of noble gases on the amorphous surfaces of adsorbents was developed and applied to the Ar−TiO₂(rutile) system. Intermolecular adsorbate-adsorbate interactions are taken into account for the nearest neighbors in the quasi-chemical approximation. The lattice energy parameters of all interactions of the model are determined from the Lennard-Jones potential (12-6). The formation of amorphous TiO₂(rutile) surface includes completion of the surface layers and partial removal of the surface oxygen ions. The quality of the amorphization procedure was confirmed by the experimentally measured heats and isotherms of adsorption of the system under study. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1109–1118, June, 1997.     

Aspects of thermal conductivity relative to heat flow

Summary The various techniques and methodologies of thermal conductivity measurement have been conventionally based on the determination of the rate of directional heat flow through a material having a unit temperature differential between its opposing faces. The constancy of this rate depends on the material density, its thermal resistance and the heat flow path itself. The last of these variables contributes most significantly to the true value of steady-state axial and radial heat dissipation depending on the magnitude of transient thermal diffusivity along these directions. The purpose of this paper is to exemplify the above features by defined parameters of heat flow measurement by existing methodologies. No new method is proposed here. Importantly, the relationship between the rate of heat transfer, total heat transferred and thermal conductivity at a given temperature under steady-state conditions for a fixed heat flow path will be illustrated.     

Thermal Studies on Ionic Derivatives of Hafnium(IV) Involving Maltol Ligand

A number of ionic chelate complexes of maltol(A) and hafnium(IV) the type[(η₅−C₅H₅)₂HfL]⁺[MCl3]⁻ (B) [HL=maltol; M=Zn(II), Cd(II), Hg(II), Cu(II)]have been synthesized and characterized by spectral studies (IR, UV, ¹H NMR and ¹³C NMR). The stoichiometry of the complexes has been confirmed by conductance measurements. Thermogravimetric (TG) and differential thermal analytical (DTA) studies have been carried out for these complexes and from TG curves, the order, apparent activation energy and apparent activation entropy of the thermal decomposition reactions have been elucidated .The order in each case has been determined to be one and the degree of spontaneity and lability have been inferred from the apparent activation energy and entropy, respectively. Thermal parameters have been correlated with some structural aspects of the complexes concerned. From differential thermal analysis curves, the heat of reaction has been calculated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Computation of heat capacities of solid state benzene,p-oligophenylenes and poly-p-phenylene

Heat capacities (C_p) of solid benzene, biphenyl,p-terphenyl,p-quaterphenyl, and poly-p-phenylene were analyzed using the ATHAS Scheme of computation. The calculated heat capacities based on approximate vibrational spectra of solid benzene and the series of oligomers containing additional phenylene groups were compared to experimental data newly measured and from the literature to identify possible additional large-amplitude motion. The skeletal heat capacity was fitted to the Tarasov equation to obtain the one- and three-dimensional vibration frequencies ₁ and ₃ using a new optimization approach. Their relationship to the number of phenylene groupsn is: ₁=426.0–150.3/n; and ₃=55.4+81.8/n. Except for benzene, the quantitative thermal analyses do not show significant contributions from large-amplitude motion below the melting temperatures.This work was financially supported by the Div. of Materials Res., NSF, Polymers Program, Grant # DMR 90-00520 and Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464.     

聚醚醚酮酮和含联苯聚醚醚酮酮共聚物的熔融热

根据Ｆｌｏｒｙ热力学统计理论和比容－熔融热作国法，由ＤＳＣ结果得到了不同联苯含量的聚醚醚酮酮－含联苯聚醚醚酮酮（ＰＥＥＫＫ－ＰＥＢＥＫＫ）共聚物的熔融热，两种方法获得的结果吻合。在此基础上给出了ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物不同联苯含量的熔点计算表达式。结果还表明，随着联苯含量ｎＢ，的变化，明显改变；当ｎＢ＝０．３５时，ＰＥＥＫＫＰＥＢＥＫＫ共聚物的值最小。