电感耦合等离子体质谱法测定血液和精液中的硼

采用HNO3-H2O2和氨水-甘露醇两种方法处理样品,电感耦合等离子体质谱法（ICP-MS）测定血液和精液中的硼。Be作内标补偿基体效应,并用标准加入法验证了方法的可靠性,标准加入法与外标法测定结果相吻合。在测定B的同时,还可进行Cr、Cu、Cd、Ba、Sr、Mn、Co、Tl、Li、Pb、Zn、Sc、Ti、V、As等多元素测定。两种样品处理方法的测定值呈显著正相关（r=0.99919）。方法检出限为0．11ng／mL（氨水-甘露醇法）,0.06ng／mL（HNO3-H2O2）。已用于测定某硼矿区血液和精液样品中的硼。     

ICP－MS用于Eu_2O_3标准物质中铝和锌的定值分析

报道了用电感耦合等离子体质谱法测定氧比铕标准物质中Ａｌ_２Ｏ_３和ＺｎＯ的方法。考察了谱干扰和基体影响，采用Ｒｈ为内标较好地补偿了基体铕的影响。方法简便、快速，定值准确、可靠。     

高效液相色谱-串联质谱法同时测定食品中五种黄色化工染料

采用高效液相色谱-串联质谱法(HPLC-MS/MS)建立了食品中非法添加的碱性橙、碱性嫩黄、酸性橙I、酸性橙II和酸性黄36这5种黄色工业染料的定量定性分析方法。使用Agilent ODS C18分离柱(50 mm×2.0 mm, 1.8 μm),以5 mmol/L乙酸铵水溶液(0.1%甲酸)-乙腈(3:2, v/v)为流动相,流速为0.3 mL/min。采用电喷雾离子化源,以多反应监测(MRM)方式分别在正、负离子模式下进行检测。在最佳检测条件下,得到了较宽的线性范围和较低的定量检出限。碱性橙和碱性嫩黄的线性范围均为5.0～80.0 mg/L;酸性橙I、酸性橙II及酸性黄36的线性范围均为10.0～160.0 μg/L。食品中碱性橙、碱性嫩黄、酸性橙I、酸性橙II及酸性黄36的定量限分别为20、20、40、40、40 ng/g。该方法重现性较好,保留时间和峰面积的相对标准偏差分别不大于0.50%和2.14%。本研究还测定了鸡肉、豆制品和黄鱼中添加的5种化工染料,回收率在79.8%~95.2%之间,结果令人满意。     

天然磁铁矿吸附-电感耦合等离子体质谱测定砷

基于天然磁铁矿对砷的选择性吸附作用,建立了以天然磁铁矿为除砷吸附剂、电感耦合等离子体质谱法(ICP-MS)测定饮用水中砷的方法.考察了吸附剂用量、溶液酸度、吸附时间、竞争共存离子等因素对As(Ⅲ)和As(Ⅴ)吸附效率的影响.结果表明.在pH 5时,选取0.5 g天然磁铁矿,振荡48 h后,吸附反应基本达到平衡,此时可定...     

电感耦合等离子体原子发射光谱(ICP-AES)技术的应用进展

概述了近年来电感耦合等离子体原子发射光谱技术的发展,并分别详细介绍了近年来电感耦合等离子体原子发射光谱法（ICP-AES）在金属材料、地矿、冶金、水质、环境、食品、农业、石油化工、生物、医药等不同领域的应用进展。最后对电感耦合等离子体原子发射光谱分析法的发展前景做了展望。     

激光烧蚀-多接收电感耦合等离子体质谱测定铀颗粒物中铀全同位素比值

建立了铀颗粒物中铀全同位素比值的分析方法,采用双面胶带装载铀颗粒物样品,优化激光烧蚀-多接收电感耦合等离子体质谱的运行参数,用标准样品交叉法校正质量分馏和探测器检测效率,测定了粒径几十微米的铀标准物质CRM124-1、GBW04234和GBW04238中铀全同位素比值.本方法对铀颗粒物中235U/238U、234 U/235U和236 U/235U测量的相对实验标准不确定度分别小于0.050％,1.7％和1.8％,测量结果与参考值在不确定度范围内符合.研究表明,本方法可快速、准确、高精度地测定铀颗粒物中铀全同位素比值.     

On-line sample-pre-treatment schemes for trace-level determinations of metals by coupling flow injection or sequential injection with ICP-MS

Within the last decade, the first generation of flow injection (FI) has been supplemented by sequential injection (SI), also termed the second generation, and, recently, by the third generation, i.e., SI-Lab-on-Valve (SI-LOV). As apparent from the literature, FI and/or SI have become dominant as substitutes for labor-intensive, manual, sample-pre-treatment and/or solution-handling procedures prior to analyte detection by inductively coupled plasma mass spectrometry (ICP-MS). The present review presents and discusses the progress of the state of the art in implementing miniaturized FI/SI systems for on-line matrix separation and pre-concentration of trace levels of metals with detection by ICP-MS. It highlights some of the frequently applied on-line, sample-pre-treatment schemes, including solid phase extraction (SPE), on-wall molecular sorption and precipitate/(co)-precipitate retention using a polytetrafluoroethylene (PTFE) knotted reactor (KR), solvent extraction-back extraction and hydride/vapor generation. It also addresses a novel, robust approach, whereby the protocol of SI-LOV-bead injection (BI) on-line separation and pre-concentration of ultra-trace levels of metals by a renewable microcolumn is interfaced to ICP-MS, as conducted in the present authors' group. It discusses the future outlook in this field.     

Determination of sulfur and selected trace elements in metallothionein-like proteins using capillary electrophoresis hyphenated to inductively coupled plasma mass spectrometry with an octopole reaction cell

The determination of sulfur in biologically relevant samples such as metalloproteins is described. The analytical methodology used is based on robust on-line coupling between capillary electrophoresis (CE) and octopole reaction cell inductively-coupled plasma mass spectrometry (ORC–ICP–MS). Polyatomic ions that form in the plasma and interfere with the determination of S at mass 32 are minimised by addition of xenon to the collision cell. The method has been applied to the separation and simultaneous element-specific detection of sulfur, cadmium, copper, and zinc in commercially available metallothionein preparations (MT) and metallothionein-like proteins (MLP) extracted from liver samples of bream (Abramis brama L.) caught in the river Elbe, Germany. Instrumental detection limits have been calculated according to the German standard procedure DIN 32645 for the determination of sulfur and some simultaneously measured trace elements in aqueous solution. For sulfur detection limits down to 1.3 g L^–1 (³⁴S) and 3.2 g L^–1 (³²S) were derived. For the other trace elements determined simultaneously detection limits ranging from 300 ng L^–1 (⁵⁸Ni) to 500 ng L^–1 (⁶⁶Zn, ⁵⁵Mn) were achieved. For quantification of sulfur and cadmium in a commercially available MT preparation under hyphenated conditions the use of external calibration is suggested. Finally, the need for proper sample-preparation technique will be discussed.     

掺Cu对MoO3-TiO2/SiO2上光促甲烷和水表面反应的影响

 在固定床环隙反应器中,借助紫外光的激发,气相甲烷和水在MoO3-TiO2/SiO2催化剂表面生成了甲醇和氢气,当在催化剂中掺杂Cu2+后,光催化剂的活性明显提高. XRD,IR,UVDRS和TPD的研究结果表明,在催化剂表面形成了具有Mo-O-Ti和Mo-O-Cu基元的高度分散物种,不但使得吸光带边明显蓝移,而且扩展了催化剂的光响应范围. 所形成的复合结构还可以优化单组分的吸光性能并促进对反应物分子的吸附活化,同时可以有效地转移光生电子和空穴. 掺杂Cu2+能够进一步延长光生电子-空穴对的寿命,进而提高反应的量子产率.     

微晶萘负载PMBP微柱分离预富集与电热蒸发-电感耦合等离子体原子发射光谱联用测定痕量稀土元素

报道了微晶萘负载1-苯基-3-甲基-4-苯甲酰基-5-吡唑酮(PMBP)微型柱分离预富集与电热蒸发-电感耦合等离子体原子发射光谱(ETV-ICP-AES)联用测定痕量稀土元素(Sc,Y,La和Yb)的新方法.试验了影响分离/预富集待测物的各种因素(包括溶液酸度、流速、试样体积、微柱尺寸);研究了吸附有待测物的微晶萘的溶解方法及共存元素对分离/测定的影响.在优化的实验条件下,方法的相对检出限为14pg/mL(Sc),32pg/mL(Y),190pg/mL(La)和26pg/mL(Yb),相对标准偏差(RSD)分别为3.1%,3.5%,4.8%和3.4%(n=9,c=10ng/mL).本法已成功地应用于生物样品中痕量稀土元素(Sc,Y,La和Yb)的测定,结果满意.