CdZnTe核探测器的蒙特卡罗模拟的初步研究

以CdZnTe核探测器的工作原理为依据,探测器内反应的随机性和反应产生的电子空穴对数目的统计规律为物理模型,应用Visual C + + 自行编制了蒙特卡罗模拟软件.模拟了γ射线在CdZnTe探测器中的响应能谱,并将模拟结果与实际器件的测试结果进行了比较讨论.模拟能谱与实际测得的能谱的主峰符合较好.此外,通过分析⁵⁷Co源辐照下探测效率与器件厚度的关系,可以推测探测效率达到最大时所对应CdZnTe探测器的理想厚度     

影响产生均匀等离子体状态的几个因素

 用数值模拟方法研究利用辐射加热来产生均匀等离子体状态,它可被用来测量元素的辐射不透明度,校验辐射不透明度理论。研究了在辐射加热铁的“三明治”型靶时影响生成均匀等离子体状态的几个重要因素（样品厚度、CH膜厚度和辐射源）所起的作用，研究发现，当铁等离子体通过热传导达到均匀状态时，其尺度必须与此时的传热距离相当，从而定出铁样品的厚度；低Z介质CH膜对铁等离子体有明显的箍束作用，调整CH膜的厚度可以调节所产生的等离子体状态；调整不同方向上的CH膜厚度，可以控制铁等离子体的膨胀方向，使它尽可能地达到一维膨胀，使得反推出的等离子体密度可以更加准确；样品的种类、厚度以及外面的低Z介质厚度决定了在某时刻能获得的等离子体状态，以及为产生此等离子体状态所需的最低辐射能。     

Simplified analytic solutions and a novel fast algorithm for Yb-doped double-clad fiber lasers

In this paper, continuous wave Yb³⁺-doped double-clad fiber lasers (DCFLs) with linear-cavity are investigated theoretically and numerically using the rate equations. Under the steady state conditions, the simplified analytic solutions of Yb³⁺-doped DCFLs under considering the scattering loss are deduced in the strongly pump condition. Compared with the known analytic solutions in published literatures, our analytic solutions are more accurate, especially, at higher reflectivity of output mirror. In addition, a fast and stable algorithm based on the Newton-Raphson method is proposed to simulate numerically Yb³⁺-doped DCFLs. The results by simplified analytic solutions are in good agreement with those by the numerical simulation. Moreover, we have performed the optimization of an Yb³⁺-doped DCFL using the simplified analytic solutions and the numerical simulations, respectively.     

Numerical simulation of soft palate movement and airflow in human upper airway by fluid-structure interaction method

In this paper, the authors present airflow field characteristics of human upper airway and soft palate movement attitude during breathing. On the basis of the data taken from the spiral computerized tomography images of a healthy person and a patient with Obstructive Sleep Apnea-Hypopnea Syndrome (OSAHS), three-dimensional models of upper airway cavity and soft palate are reconstructed by the method of surface rendering. Numerical simulation is performed for airflow in the upper airway and displacement of soft palate by fluid-structure interaction analysis. The reconstructed three-dimensional models precisely preserve the original configuration of upper airways and soft palate. The results of the pressure and velocity distributions in the airflow field are quantitatively determined, and the displacement of soft palate is presented. Pressure gradients of airway are lower for the healthy person and the airflow distribution is quite uniform in the case of free breathing. However, the OSAHS patient remarkably escalates both the pressure and velocity in the upper airway, and causes higher displacement of the soft palate. The present study is useful in revealing pathogenesis and quantitative mutual relationship between configuration and function of the upper airway as well as in diagnosing diseases related to anatomical structure and function of the upper airway. The project supported by the National Natural Science Foundation of China (10672036, 10472025 and 10421002), the Natural Science Foundation of Liaoning Province (20032109). English text was polished by Yunming Chen.     

Regularization of some linear ill-posed problems with discretized random noisy data

For linear statistical ill-posed problems in Hilbert spaces we introduce an adaptive procedure to recover the unknown solution from indirect discrete and noisy data. This procedure is shown to be order optimal for a large class of problems. Smoothness of the solution is measured in terms of general source conditions. The concept of operator monotone functions turns out to be an important tool for the analysis.

     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

离化团簇束法制备c轴取向的ZnO薄膜

为了探索低温可调控ZnO薄膜沉积技术,提出了一种新的ZnO薄膜制备方法,即离化团簇束（ICB）法,并自行设计研制了应用该方法制备ZnO薄膜的专门装置.采用超音速喷嘴获得高速锌原子团簇束,用Hall等离子体源产生氧离子束离化锌原子团簇,获得了较高的离化率.在沉积过程中,可以通过调节衬底偏压、氩氧比、衬底加热温度等参数,来控制成膜的质量;应用这个装置成功地在硅衬底上制备的ZnO薄膜,经XRD和EDS检测,薄膜的c轴取向一致,Zn、O原子百分比接近于1：1,成膜质量好.     

激光介质的多次吸收不均匀内热源模型

针对激光介质的内热源,以多次吸收作用为基础提出了适用于侧面双向泵浦板状激光介质的不均匀内热源模型,即多次吸收不均匀内热源模型,并与均匀内热源和一次吸收内热源模型进行了对比分析。研究表明,介质厚度及光吸收系数组成的无量纲参数不同时,三种内热源模型得到的内热源分布也有所不同。最后给出了内热源不均匀度及多次吸收模型与一次吸收模型之间的差异在不同目标值下的内热源模型适用准则。     

Estimating tail probabilities of heavy tailed distributions with asymptotically zero relative error

Efficient estimation of tail probabilities involving heavy tailed random variables is amongst the most challenging problems in Monte-Carlo simulation. In the last few years, applied probabilists have achieved considerable success in developing efficient algorithms for some such simple but fundamental tail probabilities. Usually, unbiased importance sampling estimators of such tail probabilities are developed and it is proved that these estimators are asymptotically efficient or even possess the desirable bounded relative error property. In this paper, as an illustration, we consider a simple tail probability involving geometric sums of heavy tailed random variables. This is useful in estimating the probability of large delays in M/G/1 queues. In this setting we develop an unbiased estimator whose relative error decreases to zero asymptotically. The key idea is to decompose the probability of interest into a known dominant component and an unknown small component. Simulation then focuses on estimating the latter ‘residual’ probability. Here we show that the existing conditioning methods or importance sampling methods are not effective in estimating the residual probability while an appropriate combination of the two estimates it with bounded relative error. As a further illustration of the proposed ideas, we apply them to develop an estimator for the probability of large delays in stochastic activity networks that has an asymptotically zero relative error.      

双对数模型对模型模拟误差的放缩问题探讨

对双对数模型lg Y=a0+a1lg X1+a2lg X2+…+anlg Xn与其对应的指数模型y=c0xa11xa22…xann的模拟相对误差的关系进行了探讨,指出双对数模型具有放大和缩小指数模型相对误差的特性.对二者的关系进行了理论推导和实例验证,并给出了二者的定量关系式.