Depth-profiling of vertical sidewall nanolayers on structured wafers by grazing incidence X-ray flourescence

The Physikalisch-Technische Bundesanstalt (PTB), Germany's national metrology institute, developed an alignment strategy to specify elemental depth profiling in vertical sidewall layers on structured wafers. For this purpose, PTB's irradiation chamber for 200 mm and 300 mm silicon wafers was used to combine total-reflection X-ray fluorescence (TXRF) and grazing incidence XRF (GIXRF) techniques by employing monochromatized undulator radiation of the BESSY II electron storage ring. 3-D test structures were fabricated to develop an optimal alignment strategy allowing for depth profiling in such nanolayers. The test structures consisted of silicon bars with widths/spacings either in the μm or in the nm range. In order to be able to differentiate the sidewalls more easily from the remainder of the structures, they were provided with an additional silicon nitride layer. Four structure types of different bar width and density parameters on two 200 mm silicon wafers were investigated. The alignment procedure developed in the present work consists of three main steps and allows for distinct excitation of multiple sidewalls of one kind. Information about depth-dependent sidewall contamination, layer thickness and composition can be obtained by this approach. First results obtained on these test structures demonstrate the application potential of this new technique. In principle, depth-dependent chemical speciation should also be possible using GIXRF in combination with near edge absorption X-ray fine structure (NEXAFS).     

Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Tannery and Surgical Industrial Wastewater by Sorghum

We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.45 GHz), GA (5 and 10 mM), and wastewater (0, 25, 50, and 100). Growth and photosynthetic pigments were significantly decreased in plants only treated with various concentrations of WW. GA significantly improved the plant growth characteristics both in MR-treated and -untreated plants compared with respective controls. HMs stress increased electrolyte leakage (EL), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) content; however, the GA chelation significantly improved the antioxidant enzymes activities such as ascorbate oxidase (APX), superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) both in MR-treated and -untreated plants under WW stress compared with respective controls. The results suggested that the MR-treated plants accumulate higher levels of HMs under GA addition in comparison to the WW-only-treated and MR-untreated plants. The maximum increase in Cd accumulation was observed in the range of 14–629% in the roots, 15–2964% in the stems, and 26–4020% in the leaves; the accumulation of Cu was 18–2757% in the roots, 15–4506% in the stems, and 23–4605% in the leaves; and the accumulation of Pb was 13–4122% in the roots, 21–3588% in the stems, and 21–4990% in the leaves under 10 mM GA and MR-treated plants. These findings confirmed that MR-treated sorghum plants had a higher capacity for HMs uptake under GA and could be used as a potential candidate for wastewater treatment.     

Thermal and spectroscopic analysis of florfenicol irradiated in the solid-state

The study has been undertaken to check the effect of ionising radiation on the physical and chemical properties of florfenicol, an antibiotic of a wide range of antibacterial activity. The solid-state samples were subjected to an electron beam generated by accelerator corresponding to the doses of 25, 100 and 400 kGy, and the effect of the exposure was analysed by the methods not requiring changes in the state (with no preliminary treatment), such as SEM, DSC, FTIR, XRD, EPR and HPLC. Florfenicol irradiated with a dose of 25 kGy has not changed the form or colour, however, a small increase in intensity of some absorption bands in the FTIR spectrum and of some peaks in the XRD pattern, a decrease in the melting point by 0.6°C, the appearance of free radicals and a loss in the FF content within the error of the method (0.91%) have been observed. After irradiation with greater doses (100 and 400 kGy) the changes have intensified, yellow discolouration appeared and the loss of FF content has increased to 6.39%. As follows from the results, the compound studied in solid-state undergoes radiolysis after e-beam irradiation in the doses ≥25 kGy, but lower doses (15–20 kGy) can be applied for its decontamination or sterilization with no adverse effect on its physico-chemical properties.     

A photo-oxidation procedure using UV radiation/H2O2 for decomposition of wine samples — Determination of iron and manganese content by flame atomic absorption spectrometry

This paper proposes the use of photo-oxidation with UV radiation/H₂O₂ as sample pretreatment for the determination of iron and manganese in wines by flame atomic absorption spectrometry (FAAS). The optimization involved the study of the following variables: pH and concentration of buffer solution, concentrated hydrogen peroxide volume and irradiation time. The evaluation of sample degradation was monitored by measuring the absorbance at the maximum wavelength of red wine (530 nm). Using the experimental conditions established during the optimization (irradiation time of 30 min, oxidant volume of 2.5 mL, pH 10, and a buffer concentration of 0.15 mol L^− 1), this procedure allows the determination of iron and manganese with limits of detection of 30 and 22 μg L^− 1, respectively, for a 5 mL volume of digested sample. The precision levels, expressed as relative standard deviation (RSD), were 2.8% and 0.65% for iron and 2.7% and 0.54% for manganese for concentrations of 0.5 and 2.0 mg L^− 1, respectively. Addition/recovery tests for evaluation of the accuracy were in the ranges of 90%–111% and 95%–107% for iron and manganese, respectively. This digestion procedure has been applied for the determination of iron and manganese in six wine samples. The concentrations varied from 1.58 to 2.77 mg L^− 1 for iron and from 1.30 to 1.91 mg L^− 1 for manganese. The results were compared with those obtained by an acid digestion procedure and determination of the elements by FAAS. There was no significant difference between the results obtained by the two methods based on a paired t-test (at 95% confidence level).     

Characterization of trace embedded impurities in thin multilayer structures using synchrotron X‐ray standing waves

X‐ray standing wave (XSW) field generated under Bragg reflection condition in a periodic Mo/Si multilayer structure has been used to determine the concentration and location of various trace element contaminants embedded in different layers of that multilayer structure. We have used intense synchrotron X rays for XSW analysis. It is observed that various trace element impurities such as Cr, Fe, Ni and W get embedded unintentionally in the multilayer structure during the deposition process. Consequences of such impurity incorporation on the optical properties of the multilayer structure are discussed in hard and soft X‐ray regions. Present measurements are important in order to optimize the deposition methods on one hand and to better correlate the measured optical properties of a multilayer structure with theoretical models on the other. Copyright © 2010 John Wiley & Sons, Ltd.     

Phytotoxicity assessment of diclofenac and its phototransformation products

The occurrence of pharmaceuticals in the environment is an emerging issue. Several studies observed that the non-steroidal anti-inflammatory drug diclofenac is ubiquitously present in most of the surveyed surface waters, worldwide. Phototransformation of diclofenac was reported from laboratory assays as well as in natural water systems, raising the question of possible adverse effects of the phototransformation products of diclofenac to aquatic organisms. In this study the phytotoxicity of diclofenac exposed to natural sunlight was evaluated using synchronized cultures of the unicellular chlorophyte Scenedesmus vacuolatus. Diclofenac dissolved in ultra-pure water at 50 mg L⁻¹ was exposed to natural midsummer sunlight for a maximum of 145 h. Twice a day subsamples were taken for chromatography and parallel phytotoxicity assessment. Inhibition of algal reproduction of the initial diclofenac solution was in the mg L⁻¹ range indicating no specific toxicity of diclofenac towards S. vacuolatus. Fast degradation of diclofenac was observed with half lives between 3.3 and 6.4 h during the first and the third day of exposure, respectively. Phytotoxicity increased after 3.5 h of exposure of diclofenac to sunlight and showed a maximum of sixfold enhanced toxicity after 53 h of exposure to sunlight. Several phototransformation products were found during the experiment. The time courses of the relative concentration of three transformation products significantly correlated with enhanced phytotoxicity during the experiment. This indicates a high toxicity potential of phototransformation products of diclofenac at concentration levels that may come close to environmental concentrations of residual diclofenac after degradation. We conclude that toxicity assessment of phototransformation products should be included in the risk assessment of pharmaceuticals in the environment.     

Effect of γ-radiation on ointment cold cream

In this paper, Co-60γ ray was used to irradiate the ointment cold cream at room temperature (25°C). We also used FTIR, GC and thin film chromatogram to analyse various irradiated samples. It was found that the ointment cold cream can be irradiated at dose of 5–35 kGy and at dose rate from 0.2 to 0.6 kGy/h at room temperature (25°C) without evident decomposition. At dose of 5–15 kGy, the number of bacteria can be reduced to hygienic standard value. The radiation sterilization is a safe method for killing the bacteria in the ointment cold cream.     

Spin-dependent electron momentum densities in Co2FeGa studied by Compton scattering

The spin density of Heusler alloy Co₂FeGa, has been studied using the Compton scattering technique with 274 keV circularly polarized synchrotron radiation in the high energy inelastic scattering beamline (BL08W), at SPring-8, Japan. The magnetic Compton profiles along the two principal directions [1 1 0] and [1 1 1] were measured. The spin profiles shows a good agreement with our FLAPW-GGA results, where the theoretical results were based on the ferromagnetic ground state. The 3d spin moment at the Co and the Fe site was found to be in excellent agreement with the earlier reported neutron diffraction measurements.     

Isentropic compressibilities of the mixture chlorobenzene + n-hexane + (n-heptane or n-octane) at 298.15 K

In this work, the applicability of the free length and the collision factor theories (FLT and CFT, respectively) to predict multicomponent changes of isentropic compressibilities is analysed and compared. To this end, appropiate expansions for ternary mixtures were derived from the original works, and then applied to a mixture containing unlike compounds in terms of functional molecular groups. Experimental data of excess molar volumes from open literature and new experimental isentropic compressibilities of the mixture chlorobenzene?+?n-hexane?+?(n-heptane or n-octane) were used to compute the parameters. A good accuracy was obtained when ternary prediction is attempted in this partially soluble mixture at different temperatures by the collision factor theory. These results show the versatility of this model for estimation in complex multicomponent mixtures with phases splitting.