Determination of five booster biocides in seawater by stir bar sorptive extraction–thermal desorption–gas chromatography–mass spectrometry

Stir bar sorptive extraction (SBSE) and thermal desorption (TD)–gas chromatography–mass spectrometry (GC–MS) have been optimized for the determination of five organic booster biocides (Chlorothalonil, Dichlofluanid, Sea-Nine 211, Irgarol 1051 and TCMTB) in seawater samples. The parameters affecting the desorption and absorption steps were investigated using 10 mL seawater samples. The optimised conditions consisted of an addition of 0.2 g mL⁻¹ KCl to the sample, which was extracted with 10 mm length, 0.5 mm film thickness stir bars coated with polydimethylsiloxane (PDMS), and stirred at 900 rpm for 90 min at room temperature (25 °C) in a vial. Desorption was carried out at 280 °C for 5 min under 50 mL min⁻¹ of helium flow in the splitless mode while maintaining a cryotrapping temperature of 20 °C in the programmed-temperature vaporization (PTV) injector of the GC–MS system. Finally, the PTV injector was ramped to a temperature of 280 °C and the analytes were separated in the GC and detected by MS using the selected-ion monitoring (SIM) mode. The detection limits of booster biocides were found to be in the range of 0.005–0.9 μg L⁻¹. The regression coefficients were higher than 0.999 for all analytes. The average recovery was higher than 72% (R.S.D.: 7–15%). All these figures of merit were established running samples in triplicate. This simple, accurate, sensitive and selective analytical method may be used for the determination of trace amounts of booster biocides in water samples from marinas.     

Adsorption of Hg(II) Ions onto Binary Biopolymeric Beads of Carboxymethyl Cellulose and Alginate

The removal of Hg(II) ions from aqueous solution by adsorption onto cross-linked polymeric beads of carboxymethyl cellulose (CMC) and sodium alginate was studied at fixed pH (6) and room temperature 28 ± 0.2°C. The cross-linked polymeric beads were characterized by FTIR spectra. Sorption capacity of the polymer for the mercury ions was investigated in aqueous media consisting different amounts of mercury ions (2.5 to 100 mg dm^?3) and at different pH values (2 to 8). Adsorption behavior of Hg(II) ions could be modeled using both the Langmuir and Freundlich isotherms. The dynamic nature of adsorption was quantified in terms of several kinetic constants such as rate constants for adsorption (k₁) and Lagergreen rate constant (K_ad). The influence of various experimental parameters such as effect of pH, contact time, solid-to-liquid ratio, salt effect, and temperature effect etc. were investigated on the adsorption of Hg(II) ions.     

Simultaneous effect of carbon and water on NOx adsorption on a stabilized Pt–Ba/Al2O3 catalyst

The influence of the presence of H₂O on the contact between carbon, used as model soot, and a model four-way catalyst (1% Pt–10% BaO/Al₂O₃) was investigated. NO_x adsorption/TPD cycles at 300 °C together with XRD, XPS and DRIFTS characterizations showed that only surface nitrate species are destabilized by the carbon present in the catalytic bed, leading to a decrease of the NO_x storage capacity and carbonate species formation. In another way, injection of water in the reactive gas flow decreases also the NO_x storage capacity of the catalyst, but promotes the formation of stable nitrate species. A non-cumulative effect of carbon and water was observed. It was proposed that a competition between the destabilization, by carbon, of weakly bonded surface nitrate species and the enhancement of bulk nitrate species formation in the presence of water occurs.     

Simultaneous removal of uranium and humic acid by cyclodextrin modified graphene oxide nanosheets

Cyclodextrin-modified graphene oxide nanosheets (denoted as CD/GO) were synthesized by an in-situ polymerization method and characterized by as well as Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and potentiometric acid-base titration. The characterization results indicated that CD was successfully grafted onto GO surfaces by forming a chemical bond. Mutual effects on the simultaneous removal of hexavalent uranium and humic acid by CD/GO from aqueous solution were investigated. The results indicated that U(VI) and humic acid (HA) sorption on CD/GO were greatly affected by pH and ionic strength. The presence of HA enhanced U(VI) sorption at low pH and reduced U(VI) sorption at high pH, whereas the presence of U(VI) enhanced HA sorption. The surface adsorbed HA acted as a “bridge” between U(VI) and CD/GO, and formed strong inner-sphere surface complexes with U(VI). Sorption isotherms of U(VI) or HA on CD/GO could be well fitted by the Langmuir model. This work highlights that CD/GO can be used as a promising material in the enrichment of U(VI) and HA from wastewater in U(VI) and humic substances obtained by environmental pollution cleanup.     

Advances in Modeling Sorption and Diffusion of Moisture in Porous Reactive Materials

Water‐vapor‐uptake experiments were performed on a silica‐filled poly(dimethylsiloxane) (PDMS) network and modeled by using two different approaches. The data was modeled by using established methods and the model parameters were used to predict moisture uptake in a sample. The predictions are reasonably good, but not outstanding; many of the shortcomings of the modeling are discussed. A high‐fidelity modeling approach is derived and used to improve the modeling of moisture uptake and diffusion. Our modeling approach captures the physics and kinetics of diffusion and adsorption/desorption, simultaneously. It predicts uptake better than the established method; more importantly, it is also able to predict outgassing. The material used for these studies is a filled‐PDMS network; physical interpretations concerning the sorption and diffusion of moisture in this network are discussed.     

Temperature dependence of methanol and ethanol vapor sorption in polyhedral oligomeric silsesquioxane (POSS) containing methacrylate membranes

This study aimed to determine the solubility and temperature dependence of methanol and ethanol vapor caused by the difference in the substituents of polyhedral oligomeric silsesquioxane (POSS)-containing polymethacrylate membranes and the spacer length between the backbone and POSS backbone. Vapor sorption of methanol and ethanol was measured at 25°C, 35°C, and 45°C for three kinds of POSS-containing polymer membranes, namely, poly(methacryl isobutyl POSS), poly(methacrylate isobutyl POSS), and poly(methacryl phenyl POSS). The primary structures of the three POSS-containing polymer chains were columnar. The solubility of alcohol vapor on the POSS-containing polymer membranes followed the mechanism of solid adsorption and not the general dissolution diffusion. The sorption amount at all three temperatures was related to the surface area of the cylindrical primary structure and the solid adsorption property of the alcohol molecule of the POSS substituent. The sorption amount increased because of the large surface area and adsorption property of alcohol molecules. Although a typical glassy polymer shows exothermic mixing and a rubbery polymer displays endothermic mixing, the sample with the POSS substituent of isobutyl group exhibited an unusual behavior of endothermic mixing despite being a glassy polymer.     

SO 2 sorption properties of fly ash zeolites

In the presented study, the sulfur dioxide sorption properties of fly ash zeolite X were investigated. Sorption tests were performed on fly ash zeolite samples that were not prepared specially for sorption, in addition to dried samples and samples in the presence of water vapor. The samples saturated with water vapor showed the highest sorption capacity. The sorption capacity of the samples additionally dried prior to the sorption experiment was higher than that of the samples that were not specially prepared for the sorption test. Regeneration tests indicated relatively good regeneration properties. The obtained results were described with the use of Langmuir, Sips, and Dubinin–Astakhov models, with the Dubinin–Astakhov model providing the best fit.     

A Hydrolytically Stable Vanadium(IV) Metal–Organic Framework with Photocatalytic Bacteriostatic Activity for Autonomous Indoor Humidity Control

Metal–organic frameworks (MOFs) with long‐term stability and reversible high water uptake properties can be ideal candidates for water harvesting and indoor humidity control. Now, a mesoporous and highly stable MOF, BIT‐66 is presented that has indoor humidity control capability and a photocatalytic bacteriostatic effect. BIT‐66 (V₃(O)₃(H₂O)(BTB)₂), possesses prominent moisture tunability in the range of 45–60 % RH and a water uptake and working capacity of 71 and 55 wt %, respectively, showing good recyclability and excellent performance in water adsorption–desorption cycles. Importantly, this MOF demonstrates a unique photocatalytic bacteriostatic behavior under visible light, which can effectively ameliorate the bacteria and/or mold breeding problem in water adsorbing materials.     

Poly(vinylbenzyl Pyridinium Salts) as Novel Sorbents for Hazardous Metals Ions Removal

Novel efficient complexing resins—poly(vinylbenzyl pyridinium salts) fabricated through poly(vinylbenzyl halogene-co-divinylbenzene) quaternization of N-decyloxy-1-(pyridin-3-yl)ethaneimine and N-decyloxy-1-(pyridin-4-yl)ethaneimine—were tested as adsorbents of Pb(II), Cd(II), Cu(II), Zn(II), and Ni(II) from aqueous solutions. The structure of these materials was established by ¹³C CP-MAS NMR, X-ray photoelectron spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy, as well as thermogravimetric and differential thermal analyses. The textural properties were determined using scanning electron microscopy and low-temperature N₂ sorption. Based on the conducted sorption studies, it was shown that the uptake behavior of the metal ions towards novel resins depended on the type of functionalities, contact time, pH, metal concentrations, and the resin dosage. The Langmuir model was investigated to be the best one for fitting isothermal adsorption equilibrium data, and the corresponding adsorption capacities were predicted to be 296.4, 201.8, 83.8, 38.1, and 39.3 mg/g for Pb(II), Zn(II), Cd(II), Cu(II), and Ni(II), respectively. These results confirmed that owing to the presence of the functional pyridinium groups, the resins demonstrated proficient metal ion removal capacities. Furthermore, VBBr-D4EI could be successfully used for the selective uptake of Pb(II) from wastewater. It was also shown that the novel resins can be regenerated without significant loss of their sorption capacity.     

膜动态吸附传递过程的理论分析与研究

本文针对气体透过薄膜的传质过程,基于动态吸附、扩散传递的概念,根据Langmuir界面动态吸附理论,研究了存在定向传递时表面吸附量与平衡吸附量的差异,从而将膜相传质分为吸附、内部扩散和脱附三个动态过程.讨论了界面吸附、脱附与扩散对传质阻力的不同影响,建立了薄膜传质的串联阻力模型.