Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

Surface and Subsurface Oxygen on Platinum in a Copper Perchlorate Solution

The formation of an adatom layer on polycrystalline platinum and the three-dimensional nucleation of copper in a copper perchlorate solution are studied by cyclic voltammetry at 0.1 V s^–1 while varying potential ranges and by recording potentiostatic current transients. About 0.6 monolayers of copper adatoms are deposited when cycling with anodic limit E _a = 1.35 V, the process is slower than that in an acid sulfate solution. Decreasing E _a accelerates the process (nearly one monolayer forms for E _a = 0.80–0.95 V in a cathodic scan) due to an increased number of active centers (metastable copper oxides) and, probably, to a change in the platinum surface microstructure. Oxygen for copper oxides is presumably supplied by water molecules adsorbed on a monolayer of copper adsorbed atoms and by subsurface oxygen (O_ss), which appears on the platinum surface after the destruction of complexes O_ss–Pt _n –ClO₄. Both the copper nucleation and the deposit growth accelerate at higher concentrations of copper oxides, which form at low E _a. High cathodic overvoltages decrease the number of active crystallization centers due to reduction or removal of copper oxides.     

Adsorption and Desorption of the Herbicide Thiazafluron as A Function of Soil Properties

Abstract

The effect of soil composition on the adsorption and desorption of the herbicide thiazafluron [1.3-dimethyl-1-(5-trifluoromethyl-1,2,3-thiadiazol-2-yl) urea] by 20 soil samples of 13 selected soil profiles of southern Spain has been studied. The adsorption curves conformed the Freundlich equation and the values of the constants, Kf and nf, ranged from 0.13 to 4.64 and from 0.14 to 1.30, respectively. The simple and multiple regression analysis between Kf and soil properties revealed soil clay content, illite content and CEC as fundamental factors determining thiazafluron adsorption by soils. Unlike other substituted ureas, non significant correlation was found with soil organic matter. Desorption of thiazafluron was hysteretic in all cases, showing and values much lower than those for adsorption. Desorption kinetic indicated that this hysteresis is essentially due to irreversible adsorption, although some degradation seems also to occur. The Freundlich desorption Kfd values were closely related to the same factors as Kf: clay and illite contents and also montmorillonite content, suggesting that most of the hysteresis was due to thiazafluron irreversibly bound to soil clay mineral components.     

Controlled Activity Polymers. IV. Copolymers of 2-(1-Naphthylacetyl)Ethyl Acrylate With Hydrophilic Comonomers: Synthesis and Characterization

2-(1-Naphthylacetyl)ethyl acrylate (NAEA) was synthesized by esterification of 1-naphthylacetic acid (NAA) and 2-hydroxyethyl acrylate (HEA) and then polymerized to obtain the polymer-bound auxin NAA. The resulting polymer is potentially useful as a plant growth regulator through hydrolytic release of NAA. Copolymers of NAEA with hydrophilic comonomers were prepared by solution polymerization. The copolymer compositions were determined from elemental analysis, ¹³C-NMR, and UV spectroscopy. The copolymer microstructure was predicted from the reactivity ratios in order to investigate the influence on the behavior of controlled release. These model structures will be utilized for assessment of structure/hydrolysis relationships in a subsequent paper.     

Mobility of small molecules in membrane materials based on copolyimide P84

1. Download : Download high-res image (172KB)
2. Download : Download full-size image

     

Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.     

Experimental investigation on the effectiveness of sorption energy recovery wheel in ventilation system

The object of this research was to investigate the effectiveness of sorption energy exchanger and the impact of the operational and thermal environmental conditions on their efficiency under steady-state conditions. To achieve this object, a test facility was installed into the Indoor Air Quality and Thermal Comfort Laboratory of BUTE University. A molecular 3Å sieve sorption wheel with high latent effectiveness is integrated into the experimental setup. In this study, the correlation between the sensible, latent, total effectiveness under different ambient air temperature and humidity values and different rotational speeds of the wheel is investigated in detailed by experimental tests.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

Sorption of methanol,dimethyl carbonate,methyl acetate,and acetone vapors in CTA and PTMSP: General findings from the GAB Analysis

Sorption of vapors of four organic compounds in two glassy polymers, cellulose triacetate (CTA) and poly[(trimethylsilyl)propyne] (PTMSP), has been reported and analyzed in terms of Guggenheim‐Anderson‐De Boer (GAB) model. These two structurally and physicochemically different glassy polymers both independently showed that one sorption site was formed by about three monomeric units. This finding held true for vapors of all characterized compounds; that is, for methanol, for its derivatives dimethyl carbonate and methyl acetate, and for acetone. The “rule of three” might thus also be applicable to other sorbates and glassy polymers. Further, an original modification of the GAB model for the sorption of alcohols in PTMSP was derived and successfully tested. Overall, the analyses of the sorption isotherms, heats of sorption and diffusion coefficients supported the view that the sorption of vapors in glassy polymers has adsorptive nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 561–569     

Effect of Chain Length of Polyethylene Glycol and Crosslink Density (NCO/OH) on Properties of Castor Oil Based Polyurethane Elastomers

The equilibrium swelling study of polyurethanes (PU) was carried out in various solvents in order to calculate their solubility parameter. The kinetics of swelling and sorption have also been studied in 1,4‐dioxane at 30°C. The PU was synthesized by reacting a novel polyol (castor oil derivative and epoxy based resin, EpxR) and one of the polyethylene glycols (PEG 200, PEG 400, PEG 600) with different weight compositions, with a toluene diisocyanate (TDI) adduct (derived from toluene diisocyanate and R60 polyol). Different NCO/OH ratio viz. 1, 1.3 and 1.7 were employed in the study. The results were found to vary with the weight composition of polyol components, as well as the crosslink density of the samples. The sorption behavior is also found to vary with the molecular weight of polyethylene glycol employed in the preparations of the polyurethanes. Kinetic studies of swelling revealed that the sorption is anomalous in nature. The diffusion coefficient (D) increased with an increase in the NCO/OH ratio and decreased with an increase in chain length of polyethylene glycol. The sorption coefficient (S) decreased with an increase in crosslink density (NCO/OH) and increased with increasing polyethylene glycol (i.e., PEG 200, PEG 400, and PEG 600) moieties in the polyurethanes. The molecular weight between two crosslink points was calculated using the Flory Rehner equation (24), and hence, the number of chains per unit volume (N) and degree of crosslinking (ν) in all the samples were determined.