3D Dynamic analysis of soil–tool interaction using the finite element method

Previous experimental and finite element studies have shown the influence of both soil initial conditions and blade operating conditions on cutting forces. However, most of these finite element analyses (FEA) are limited to small blade displacements to reduce element distortion which can cause solution convergence problems. In this study a dynamic three-dimensional FEA of soil–tool interaction was carried out based on predefined failure surfaces to investigate the effect of cutting speed and angle on cutting forces over large blade displacements. Sandy soil was considered in this study and modeled using the hypoplastic constitutive model implemented in the commercial FEA package, ABAQUS. Results reveal the validity of the concept of predefined failure surfaces in simulating soil–tool interaction and the significant effect of cutting acceleration on cutting forces.     

Mechanical model of lung parenchyma as a two-phase porous medium

The anatomy and geometry of the lung at the micro- and macroscopic level have been described briefly. A notion of lung parenchyma — a macroscopically continuous medium whose mechanical properties result from those of microstructural components — has been adapted. Simplifying assumptions propounded in the constitutive model have been discussed. Two phases have been distinguished in the medium: the solid phase — a highly deformable, nonlinearly elastic skeleton in the form of a thin-walled tissue structure on the micro-scale — and the fluid phase — perfect gas (air) filterating through the structure. General constitutive relations for both phases and their mechanical interactions have ben formulated. Further, the fundamental set of differential equations of the quasi-static coupled problem has been developed. Large deformations, material nonlinearities, and dependence of permeability on skeleton deformation have been included. Matrix formulation of the problem has been presented from the point of view of the finite element method. An implicit iterative time integration scheme has been proposed. The algorithm has been illustrated with results of simple numerical tests.     

高超音速湍流分离表面热流率的脉动特性

本文给出高超音速湍流分离不稳定特性的实验研究结果。试验条件是:自由流马赫数为 7.8,单位长度雷诺数为 3.5×10~7/米。分离流场由有限展长前向台阶产生,并用有高空间分辨率和快速响应的一列平齐安装的铂膜电阻温度计和多通道系统测量其表面热流率脉动。信号的条件采样分析结果表明:分离激波的根部由一束压缩波构成,流向展长约二分之一来流边界层厚度,在边界层外汇聚成单一主激波。这种激波结构极其不稳定,出现大尺度运动,流向运动的尺度约为分离激波上游影响区域长度的22％。激波振荡频率为一宽频带,主要集中在 1～3 千赫。在分离激波运动区域,热流脉动呈间歇性,在无扰动和激波扰动间跳跃。可以认为这种间歇性是分离激波系统大尺度振荡的结果。在激波运动区域的下游为分离区,流体继续压缩,热流脉动无间歇。     

Viscous waves and wave-structure interaction in a tank using adapting quadtree grids

Viscous waves and waves over a submerged cylinder in a stationary tank are simulated using a volume-of-fluid numerical scheme on adaptive hierarchical grids. A high resolution interface-capturing method is used to advect the free surface interface and the Navier–Stokes equations are discretised using finite volumes with collocated primitive variables and solved using a Pressure Implicit with Splitting of Operators (PISO) algorithm. The cylinder is modelled by using the technique of Cartesian cut cells. Results of flow of a single fluid past a cylinder at Reynolds number Re=100 are presented and found to agree well with experimental and other numerical data. Viscous free surface waves in a tank are simulated using uniform and quadtree grids for Reynolds numbers in the range from 2 to 2000, and the results compared against analytical solutions where available. The quadtree-based results are of the same accuracy as those on the equivalent uniform grids, and retain a sharp interface at the free surface while leading to considerable savings in both storage and CPU requirements. The nonlinearity in the wave is investigated for a selection of initial wave amplitudes. A submerged cylinder is positioned in the tank and its influence on the waves as well as the hydrodynamic loading on the cylinder is investigated.     

A Novel Fluid Structure Interaction Experiment to Investigate Deformation of Structural Elements Subjected to Impulsive Loading

This paper presents a novel experimental methodology for the study of dynamic deformation of structures under underwater impulsive loading. The experimental setup simulates fluid–structure interactions (FSI) encountered in various applications of interest. To generate impulsive loading similar to blast, a specially designed flyer plate impact experiment was designed and implemented. The design is based on scaling analysis to achieve a laboratory scale apparatus that can capture essential features in the deformation and failure of large scale naval structures. In the FSI setup, a water chamber made of a steel tube is incorporated into a gas gun apparatus. A scaled structure is fixed at one end of the steel tube and a water piston seals the other end. A flyer plate impacts the water piston and produces an exponentially decaying pressure history in lieu of explosive detonation. The pressure induced by the flyer plate propagates and imposes an impulse to the structure (panel specimen), which response elicits bubble formation and water cavitations. Calibration experiments and numerical simulations proved the experimental setup to be functional. A 304 stainless steel monolithic plate was tested and analyzed to assess its dynamic deformation behavior under impulsive loading. The experimental diagnostic included measurements of flyer impact velocity, pressure wave history in the water, and full deformation fields by means of shadow moiré and high speed photography.     

Non-Linear Self-Excited Random Vibrations and Stability of an SDOF System with Parametric Noises

Abstract. The paper presents the solution to the properties of stochastic response of a system with random parametric noises, which is prone to the loss of aerodynamical stability. The system is described by an equation of van der Pol type with the negative linear, and with the positive cubic dampings. The coefficients of the linear damping and of the stiffness include the multiplicative random perturbations, the external excitation being given as a sum of a deterministic function and of an additive perturbation. All three input random processes are supposed to be Gaussian and centered, with the non-zero mutual stochastic parameters, as it corresponds to the properties of real systems. The solution has been based on the method of stochastic linearisation and of the subsequent solution of the Fokker–Planck–Kolmogorov equation in the sense of the first and second stochastic moments for the transient and stationary states. There have been demonstrated several effects, which are typical for systems with parametric noises, differentiating them from the systems with constant coefficients. The principal attention has been devoted to the properties of the spectral density of the response, the character of which changes abruptly with the degree of non-linearity of the damping and of the level of random perturbations.Sommario. La presente memoria studia le proprietà della risposta stocastica di un sistema con eccitazione casuale parametrica, che tende alla perdita della stabilità aerodinamica. Il sistema è descritto mediante un'equazione del tipo di van der Pole con il termine lineare dello smorzamento negativo e il termine cubico positivo. Poichá l'eccitazione esterna è la somma di una funzione deterministica e di una perturbazione additiva, i coefficienti dello smorzamento lineare e della rigidezza comprendono le perturbazioni casuali moltiplicative. I tre processi stocastici di eccitazione sono assunti gaussiani e a media nulla con parametri stocastici incrociati diversi da zero, come si verifica per le proprietà dei sistemi reali. La soluzione è basata sul metodo della linearizzazione stocastica e della successiva soluzione dell'equazione di Fokker-Planck-Kolmogorov studiando i primi e i secondi momenti statistici per gli stati transitori e stazionari. Vengono mostrati diversi effetti, tipici dei sistemi con eccitazione parametrica, differenziandoli dai sistemi a coefficienti costanti. Particolare attenzione è rivolta alle proprietà della densità spettrale della risposta le cui caratteristiche cambiano bruscamente con il grado di non linearità dello smorzamento e del livello di casualità delle perturbazioni.     

Fluid Flow-Induced Nonlinear Vibration of Suspended Cables

The nonlinear interaction of the first two in-plane modes of a suspended cable with a moving fluid along the plane of the cable is studied. The governing equations of motion for two-mode interaction are derived on the basis of a general continuum model. The interaction causes the modal differential equations of the cable to be non-self-adjoint. As the flow speed increases above a certain critical value, the cable experiences oscillatory motion similar to the flutter of aeroelastic structures. A co-ordinate transformation in terms of the transverse and stretching motions of the cable is introduced to reduce the two nonlinearly coupled differential equations into a linear ordinary differential equation governing the stretching motion, and a strongly nonlinear differential equation for the transverse motion. For small values of the gravity-to-stiffness ratio the dynamics of the cable is examined using a two-time-scale approach. Numerical integration of the modal equations shows that the cable experiences stretching oscillations only when the flow speed exceeds a certain level. Above this level both stretching and transverse motions take place. The influences of system parameters such as gravity-to-stiffness ratio and density ratio on the response characteristics are also reported.     

多孔介质中收聚圆锥冲击波的相互作用的实验研究

我们从实验上研究了铝粉、铁粉和钨粉中收聚圆锥冲击波的相互作用,并导出了利用实验数据计算此波锥顶角的公式。     

粘流-无粘干扰流动(IF)理论

对不可压缩层流二维干扰流动,本文提出一个干扰流动(IF)理论。IF理论要点为:1)干扰流动沿主流的法向被分为三层即粘性层、干扰层和无粘层,引进了法向动量交换为主导过程的干扰层概念。2)利用力学守恒律、三层匹配关系及文中引进的干扰模型,把三层的空间尺度及惯性-粘性诸力的数置级表示为单参数m的函数,m<1/2·3)导出描述各层流动的控制方程、导出描述全城流动的控制方程为简化Navie-Stokes(SNS)方程。IF理论适用于不存在分离的附着干扰流动以及存在分离的大范围干扰流动,经典边界层(CBL)理论和流动分离局部区域Triple-Deck(TD)理论分别是本文理论在参数m=O和1/4时的两个特例,本文理论容易推广到可压缩、三维及湍流流动。     

Simultaneous combination and 1:3:5 internal resonances in a parametrically excited beam-mass system

The nonlinear dynamics of a base-excited slender beam carrying a lumped mass subjected to simultaneous combination parametric resonance of sum and difference type along with 1:3:5 internal resonances is investigated. Method of normal form is applied to the governing nonlinear temporal differential equation of motion to obtain a set of first-order differential equations which are used to obtain the steady-state, periodic, quasi-periodic and chaotic responses for different control parameters viz., amplitude and frequency of external excitation and damping. Frequency response, phase portraits, time spectra and bifurcation diagram are plotted to visualize the system behaviour with variation in the control parameters. Here, two distinct zones of trivial instability, blue sky catastrophe phenomena, jump down phenomena, simultaneous occurrence of periodic and chaotic orbits, period doubling of the mixed-mode periodic orbits leading to chaos, attractor merging crisis, boundary crisis, type II and on-off intermittencies are observed. Bifurcation diagram is plotted to facilitate the designer to choose a safe operating zone.