一种基于三角形几何结构的星图识别算法

提出了一种新的以星三角形为基本识别单元的几何结构星图识别算法。通过对观测误差的预处理,将该算法星三角形的匹配过程转换为一个没有误差的三角形识别问题。引入一个能部分描述三角形结构的特征量,将导航三角形的识别所需的特征匹配数量降低,而多三角形的组合有效地提高了正确识别率。仿真实验表明,该算法所需导航星库容量小,识别效率高,误识率低,实时性和鲁棒性优于传统的三角形星图识别算法。     

用丝电流方法快速识别HL-2A等离子体边界

利用等离子体外部测量的磁场信号,使用丝电流方法对HL-2A等离子体边界进行了快速识别。介绍了该方法的原理、相关的测量系统配置和该程序的研制进展。对识别结果进行了讨论。     

粒子鉴别中dE/dx和TOF的权重

在北京谱仪数据分析中,粒子鉴别使用了dE/dx和TOF的信息.在利用dE/dx和TOF联合鉴别粒子时,通常的做法是把两者的χ²值等权重相加(χ²方法).在不同的动量区间,dE/dx和TOF对粒子的鉴别能力不同.本文给出两者联合鉴别时不同动量区间的权重,并构造一个新的线性变量来进行粒子鉴别     

基于小波包分析及支持向量机的超音速目标识别方法研究

提出了基于小波包分析及支持向量机的超音速目标识别方法 .通过 5 .5 6mm ,7.6 2mm和 12 .7mm三种枪弹试验获取信号 ,用小波包分解激波信号 ,统计每个频带的能量特征 ,用支持向量机方法训练测试样本 ,获得了很好的分类效果 .仿真结果表明基于超音速飞行体产生的激波信号来识别目标是可行的 .     

一类热传导问题源项识别的快速稳定算法

利用正算子的性质和Lax-Milgram定理,将一维热传导方程源项识别问题转化为适定的、第二类Volterra方程的求解,给出一个新的快速稳定算法,并进行理论分析.采用两种实现后验准则的新途径,在输入数据的误差水平已知和未知的情况下,快速地决定正则参数.数值实验证实了算法的有效性.     

激光烧蚀脉冲放电激发的土壤等离子体电子数密度和温度的研究

以激光烧蚀快脉冲放电激发土壤为例,研究了激光烧蚀快脉冲放电等离子体技术产生的土壤等离子体的电子数密度和温度。根据实验测得的Si原子和离子谱线的强度和萨哈玻尔兹曼方程,计算了等离子体的电子温度,并从分析Si I 250.69nm谱线的斯塔克展宽中导出了等离子体的电子数密度。与使用同样激光能量激发的激光等离子体相比,激光烧蚀快脉冲放电激发等离子体的电子数密度和温度都明显增加,与观察到的光谱信号强度是一致的。     

Adaptive modeling, adaptive data assimilation and adaptive sampling

For efficient progress, model properties and measurement needs can adapt to oceanic events and interactions as they occur. The combination of models and data via data assimilation can also be adaptive. These adaptive concepts are discussed and exemplified within the context of comprehensive real-time ocean observing and prediction systems. Novel adaptive modeling approaches based on simplified maximum likelihood principles are developed and applied to physical and physical–biogeochemical dynamics. In the regional examples shown, they allow the joint calibration of parameter values and model structures. Adaptable components of the Error Subspace Statistical Estimation (ESSE) system are reviewed and illustrated. Results indicate that error estimates, ensemble sizes, error subspace ranks, covariance tapering parameters and stochastic error models can be calibrated by such quantitative adaptation. New adaptive sampling approaches and schemes are outlined. Illustrations suggest that these adaptive schemes can be used in real time with the potential for most efficient sampling.     

Identification of lagrangian coherent structures in the turbulent boundary layer

Using Finite-Time Lyapunov Exponents (FTLE) method, Lagrangian coherent structures (LCSs) in a fully developed flat-plate turbulent boundary layer are successfully identified from a two-dimensional (2D) velocity field obtained by time-resolved 2D PIV measurement. The typical LCSs in the turbulent boundary layer are hairpin-like structures, which are characterized as legs of quasi-streamwise vortices extending deep into the near wall region with an inclination angle θ to the wall, and heads of the transverse vortex tube located in the outer region. Statistical analysis on the characteristic shape of typical LCS reveals that the probability density distribution of θ accords well with t-distribution in the near wall region, but presents a bimodal distribution with two peaks in the outer region, corresponding to the hairpin head and the hairpin neck, respectively. Spatial correlation analysis of FTLE field is implemented to get the ensemble-averaged inclination angle θ _R of typical LCS. θ _R first increases and then decreases along the wall-normal direction, similar to that of the mean value of θ. Moreover, the most probable value of θ saturates at y ⁺=100 with the maximum value of about 24°, suggesting that the most likely position where hairpins transit from the neck to the head is located around y ⁺=100. The ensemble- averaged convection velocity U _c of typical LCS is finally calculated from temporal-spatial correlation analysis of FTLE field. It is found that the wall-normal profile of the convection velocity U _c(y) accords well with the local mean velocity profile U(y) beyond the buffer layer, evidencing that the downstream convection of hairpins determines the transportation properties of the turbulent boundary layer in the log-region and beyond. Supported by the National Natural Science Foundation of China (Grant Nos. 10425207 and 10832001)     

传统光谱变换与连续小波耦合定量反演潮土有机质含量

以北京地区的96个潮土土样的有机质含量为研究对象,以传统光谱变换为参照,研究分析传统光谱变换与连续小波的耦合在估测土壤有机质含量的可行性;首先采用传统光谱变换与连续小波处理土壤光谱数据,然后将处理后的光谱数据与土壤有机质含量进行相关性分析,提取敏感波段,并采用偏最小二乘法构建土壤有机质含量估测模型。结果表明：耦合传统光谱变换技术与连续小波技术可大幅提升光谱对有机质含量的敏感性,其相关系数R2最高可达0.714,这表明耦合传统光谱变换技术与连续小波技术可深入挖掘光谱内的有益信息;与传统光谱变换技术相比,基于耦合传统光谱变换技术与连续小波技术构建的模型精度更高,稳定性更好,其中以微分变换构建的模型最优,其R2=0.772,RMSE=0.223,这表明耦合传统光谱变换技术与连续小波技术可有效压制噪声的负面影响,提升光谱的稳定性。     

燃料电池有轨电车声学优化*

基于线路噪声实验,系统测试分析了燃料电池有轨电车的噪声特性,研究了噪声分布以及空气传声、结构传声路径对噪声的贡献。结果表明改善车辆地板、空调、顶板和风挡的隔声性能,尤其是在500～1250 Hz的1/3倍频带范围内的隔声性能将有助于改善车辆内部声学环境。优化燃料电池系统控制,降低冷却单元转速将有助于改善车辆外部声学环境。在此基础上提出减震降噪建议措施,再次进行线路噪声实验,结果表明该措施有效。