现代教育技术在大学化学实验教学中的应用

多媒体教育技术结合视频录像、微格教学和应用软件等新型教学手段应用于本科实验课教学,不仅能形象地展现抽象的理论概念,揭示复杂的实验原理,而且能活跃课堂气氛,激发学习兴趣,提升创新意识和提高实验效率。这一理念对学生综合素质培养和实验教学方法改革具有重要意义。     

Creatinine sensor based on a molecularly imprinted polymer-modified hanging mercury drop electrode

Molecularly imprinted polymers (MIP) have been elucidated to work as artificial receptors. In our present study, a MIP was applied as a molecular recognition element to a chemical sensor. We have constructed a creatinine sensor based on a MIP layer selective for creatinine and its differential pulse, cathodic stripping voltammetric detection (DPCSV) on a hanging mercury drop electrode (HMDE). The creatinine sensor was fabricated by the drop coating of dimethylformamide (DMF) solution of a creatinine-imprinted polymer onto the surface of HMDE. The modified-HMDE, preanodised in neutral medium at +0.4 V versus Ag/AgCl for 120 s, exhibited a marked enhancement in DPCSV current in comparison to the less anodised (≤+0.3 V) HMDE. The creatinine was preconcentrated and instantaneously oxidised in MIP layer giving DPCSV response in the concentration range of 0.0025-84.0 μg mL⁻¹ [detection limit (3σ) 1.49 ng mL⁻¹]. The sensor was found to be highly selective for creatinine without any response of interferents viz., NaCl, urea, creatine, glucose, phenylalanine, tyrosine, histidine and cytosine. The non-imprinted polymer-modified electrode did not show linear response to creatinine. The imprinting factor as high as 9.4 implies that the imprinted polymer exclusively acts as a recognition element of creatinine sensor. The proposed procedure can be used to determine creatinine in human blood serum without any preliminary treatment of the sample in an accurate, rapid and simple way.     

槲皮素在氧化锆修饰玻碳电极上的伏安行为及检测

制备了氧化锆修饰的玻碳电极,采用示差脉冲伏安法和循环伏安法探究了槲皮素在该电极上的电化学行为。结果表明,制备的修饰电极在pH=7.00的磷酸盐缓冲溶液（PBS）中对槲皮素的氧化还原具有明显的电催化作用。采用槲皮素的氧化峰电流作为分析信号。在浓度为2.5×10-8~5×10-5 mol/L的范围内,氧化峰电流和浓度成良好的线性关系,线性方程为ip（μA）=0.0825c-9.861 84,检出限为5.35×10-9 mol/L。     

Fabrication of a Sensitive Electrochemical Biosensor for Detection of DNA Hybridization Based on Gold Nanoparticles/CuO Nanospindles Modified Glassy Carbon Electrode

In this work, a sensitive electrochemical DNA biosensor for the detection of sequence‐specific target DNA was reported. Firstly, CuO nanospindles (CuO NS) were immobilized on the surface of a glassy carbon electrode (GCE). Subsequently, gold nanoparticles (Au NPs) were introduced to the surface of CuO NS by the electrochemical deposition mode. Probe DNA with SH (HS‐DNA) at the 5′‐phosphate end was covalently immobilized on the surface of the Au NPs through Au? S bond. Scanning electron microscopy (SEM) was used to elucidate the morphology of the assembled film, and electrochemical impedance spectroscopy technique (EIS) was used to investigate the DNA sensor assembly process. Hybridization detection of DNA was performed with differential pulse voltammetry (DPV) and the methylene blue (MB) was hybridization indicator. Under the optimal conditions, the decline of reduction peak current of MB (ΔI) was linear with the logarithm of the concentration of complementary DNA from 1.0×10^?13 to 1.0×10^?6 mol·L^?1 with a detection limit of 3.5×10^?14 mol·L^?1 (S/N=3). In addition, this DNA biosensor has good selectivity, and even can distinguish single‐mismatched target DNA.     

Kinetics and mechanism of electron-induced splitting of a cyclobutane pyrimidine dimer with or without an electron acceptor

DNA repair has received heightened attention in recent years as ozone depletion threatens to significantly increase DNA damage by UVB radiation[1—6]. The major lesions formed in DNA by this radiation are cis-syn cyclobutane pyrimidine dimers, which are created by the linkage of two neighboring pyrimidine bases in DNA via C5-C5 and C6-C6 atoms by [2+2] cycloaddition[2,5—8]. This potentially lethal or mutagenic damage can be repaired either by the removal of the damaged bases by excisio…     

Determination of Selenium with a Poly(1,8‐diamino‐naphthalene)‐Modified Electrode

The performance of a poly(1,8‐diaminonaphthalene)‐modified electrode for the determination of the Se(IV) ion in an aqueous medium was investigated with anodic stripping voltammetry without the pretreating of the sample. The experimental parameters for the analysis of Se(IV) were optimized and the characteristics of this polymer‐modified electrode were investigated by using cyclic voltammetry. The Se(IV) ions were chemically deposited onto the surface of the pDAN‐Au electrode in an acidic medium. The detection limit employing the anodic stripping differential pulse voltammetry was 9.0×10^?9 M for Se(IV) with 4.4 % of RSD. Satisfactory result for the determination of Se(IV) was acquired employing a certified standard urine reference material, SRM's 2670 (trace element in urine) with 4.1 ppb of SD.     

红外吸收法测定碳化铪粉末中的氧含量

应用氧氮分析仪建立碳化铪粉末中氧的测定方法。针对碳化铪熔点极高的特性,对加热功率、称样量和空白值等测定条件进行探讨,选择适合的助熔剂和高温石墨坩埚,确定了最佳测试条件。将该方法用于实际样品测定,测定结果的相对标准偏差小于2.0%(n=9),样品的加标回收率为98.1%～102.6%。     

正丁烷和异丁烷在改性纳米HZSM-5上的芳构化反应

用脉冲微反装置评价了正丁烷和异丁烷在氢型和锌改性的纳米ZSM-5催化剂上的反应活性和芳构化选择性.结果表明,在550℃下,异丁烷在氢型和不同锌负载量的纳米ZSM-5催化剂上的转化率都远高于正丁烷,但其芳构化选择性低于正丁烷.脱甲基活化是异丁烷和正丁烷的重要活化方式,也是影响其芳构化选择性的主要因素.锌改性在提高异丁烷和正丁烷转化率的同时,也促进了正丁烷和异丁烷的脱甲基活化.在混合丁烷进料反应的情况下,正丁烷和异丁烷的转化率与其单独进料时十分接近,这说明正丁烷和异丁烷共存时不会发生明显的竞争吸附和反应.纳米ZSM-5因晶粒度小,孔道短和微孔扩散阻力低而有利于异丁烷转化.     

宽带隙Cu(In,Al)Se2薄膜的制备及表征

以特殊脉冲电沉积方法制备CuInSe2(CIS)前驱体薄膜, 通过真空蒸镀法在CIS薄膜上沉积Al膜, 经硒化退火后在氧化铟锡(ITO)基底上制备了Cu(InAl)Se2(CIAS)薄膜. 采用扫描电子显微镜(SEM)、X射线能谱(EDS)、X射线衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见吸收光谱(UV-Vis)对其形貌、结构、成分及光学吸收性质进行了表征. 结果表明, 制备的CIAS薄膜颗粒均匀, 表面平整致密, 呈黄铜矿结构. 薄膜在可见光区具有良好的吸收, 带隙约为1.65 eV.     

两种蒙药中锗的差示脉冲极谱测定及其红外光谱的差异

采用差示脉冲极谱法,以3,4-二羟基苯甲醛的0.072 mol·L-1硫酸溶液作为底液,在峰电位为-0.53 Ⅴ(vs．Ag/AgCl),锗(Ⅳ)浓度在1.03×10-5～1004×10-4mol·L-1范围内与峰电流呈线性关系.据此测定了阿嘎日-35和阿嘎日-8中总锗、无机锗、有机锗含量,并利用红外光谱比较了两种蒙药的红外谱图的差异,据此可对两种蒙药予以区别.