A crack perpendicular to and terminating at a bimaterial interface

Using dislocation simulation approach, the basic equation for a finite crack perpendicular to and terminating at a bimaterial interface is formulated. A novel expansion method is proposed for solving the problem. The complete solution to the problem, including the explicit formulae for theT stresses ahead of the crack tip and the stress intensity factors are presented. The stress field characteristics are analysed in detail. It is found that normal stresses {ie27-1} and {ie27-2} ahead of the crack tip, are characterised byQ fields if the crack is within a stiff material and the parameters |p _T | and |q _T | are very small, whereQ is a generalised stress intensity factor for a crack normal to and terminating at the interface. If the crack is within a weak material, the normal stresses {ie27-3} and {ie27-4} are dominated by theQ field plusT stress. This work was supported by the Swedish Research Council for Engineering Sciences.     

40Cr材料动态起裂韧性KId（）的实验测试

描述了利用Ｈｏｐｋｉｎｓｏｎ压杆技术加载三点弯曲试样测试４０Ｃｒ，材料动态起裂韧性ＫＩｄ（）的试验方法。试样上的动态载荷历程由Ｈｏｐｋｉｎｓｏｎ杆直接测得，并分别代入动态有限元程序及近似公式求得动态应力强度因子历史；由贴在试样裂尖附近的应变片确定起裂时间，最终确定起裂时的动态应力强度因子值，即动态起裂韧性ＫＩｄ（）。试验结果表明:利用Ｈｏｐｋｉｎｓｏｎ压杆技术加载三点弯曲试样测试材料动态起裂韧性的方法是可行的，起裂时，动态有限元的位移法、应力法及近似公式法求得的动态应力强度因子值比较吻合；在本文的载荷速率下，４０Ｃｒ材料动态起裂韧性ＫＩｄ（）与准静态裂韧性ＫＩｄ（）相比，降低了约２８％。     

Fatigue crack growth behavior of Al7050-T7451 attachment lugs under flight spectrum variation

This paper discusses an analytical and experimental investigations of the fatigue crack growth behavior in attachment lugs subjected to a randomized flight-by-flight spectrum. In the analysis, the stress intensity factors for through-the-thickness cracks initiating from lug holes were compared by weight function method, boundary element method (BEM), the interpolation of Brussat’s solution. The stress intensity factors of a corner crack at a transition region were obtained using two parameter weight function method and correction factors. Fatigue life under a load spectrum was predicted using stress intensity factors and Willenborg retardation model considering the effects of a tensile overload. Experiments were performed under a load spectrum and compared with the fatigue life prediction using the stress intensity factors by different methods. Changes of fatigue life and aspect ratio according to the clipping level of the spectrum were discussed through experiment and prediction. Effect of the spectrum clipping level on the fatigue life was experimentally evaluated by using beach marks of fractured surface.     

高耸异型烟囱结构风压和风振系数试验研究

本文在模拟的大气边界层中,对某一发电厂高耸异型烟囱的刚性模型进行了测压试验研究,得到了这一结构的平均风压系数、最大和最小风压系数分布,以及该结构的风荷载体型系数;结果表明在烟囱外形明显变化的局部区域,风压绝对值较大,与理论分析一致。同时,对动态测力试验模型进行了高频动态天平测力试验研究,详细介绍了试验及数据处理方法,根据试验结果计算得到了该烟囱在风作用下的动力响应和风振系数;根据试验结果计算所得的风振系数值大于按规范公式估算值。这些结果不仅为结构的风荷载计算提供了依据,也有助于进一步认识该类异性烟囱结构的风荷载和风振特性。     

一种低精度惯性测量单元的精确标定技术

低精度惯性测量单元的温度特性和非线性严重，为补偿光纤陀螺的温度特性和非线性，通过高低温、多速率的标定实验研究了光纤陀螺输出电压与温度、转速的关系，采用零偏和标度因数统一标定的思想提出了光纤陀螺分段模型；为补偿MEMS加速度计的温度特^陛，通过高低温位置实验研究了加速度计输出电压与温度、输入加速度的关系，提出了加速度计分段模型。采用逐步线性回归对以上模型进行了简化。实时补偿效果表明，当温度从-30℃到60℃变化时，在±60（°）／s转速内角速度误差基本小于0．02（°）／s，加速度误差小于0．005g．     

Liquid single- and gas—liquid two-phase flows of magnetic fluid in the presence of a high non-uniform parallel magnetic field

The effect of a non-uniform parallel high magnetic field on flow control characteristics is investigated experimentally for a magnetic fluid single-phase flow and an air—magnetic fluid two-phase flow in a vertical channel. It is found that as the magnetic field strength is increased, the friction factor of the single-phase flow increases significantly. For the two-phase flow, the friction pressure loss and the head pressure loss, which is smaller than the friction loss, are negligibly small compared with the magnetic pressure loss. In the case where air is injected 27.9d upstream from the maximum magnetic field, the air flow is blocked by the magnetic force in the entrance of the magnetic field, which leads to increases in both local void fraction and pressure drop there. In the case where air is injected 1.43d downstream from the maximum magnetic field, the air flow is accelerated, resulting in a decrease in void fraction and an increase in pressure rise. In the latter case and under the present range of experimental conditions, the magnetic pumping head reaches 0.02 MPa at the highest, and the maximum circulation flow rate reaches twice as high as non-magnetically driven flow rate.     

双周期裂纹压电材料反平面剪切问题断裂力学分析

研究压电材料双周期裂纹反平面剪切与平面电场作用的问题．运用复变函数方法，获得了该问题严格的闭合解，并由此给出了裂纹尖端应力强度因子和电位移强度因子的精确公式．数值算例显示了裂纹分布特征对材料断裂行为的重要影响．叠间小裂纹能够对主裂纹的应力和电位移场起着屏蔽作用，相反行间小裂纹却起着放大作用，至于钻石形分布裂纹的影响规律则更为复杂．对于某些特殊情形给予了解答并导出一系列有意义的结果。     

THE INTERACTION PROBLEM BETWEEN THE ELASTIC LINE INCLUSIONS

ＩｎｔｒｏｄｕｃｔｉｏｎＯｆａｌｌｔｈｅｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｓ,ｔｈｅｓｈｏｒｔ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｎｏｔｏｎｌｙｓｔｒｅｎｇｔｈｅｎｓｔｈｅｍａｔｒｉｘｂｕｔａｖｏｉｄｓｄｅｆｅｃｔｉｏｎｓｏｆｔｈｅｌｏｎｇ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌａｓｗｅｌｌ.Ｔｈｅｍｉｃｒｏ＿ｍｅｃｈａｎｉｃｓａｂｏｕｔｉｔｓｕｃｈａｓｆｒａｃｔｕｒｅ ,ｆａｔｉｇｕｅａｎｄｄａｍａｇｅｉｓｖｅｒｙｃｏｍｐｌｅｘ .Ｉｎｔｈｅｐｒｅｖｉ…     

Prediction of mixed-mode fracture based on an elasto–plastic energy balance criterion

The maximum energy release rate criterion, i.e., G _max criterion, is commonly used for crack propagation analysis. This fracture criterion is based on the elastic macroscopic strength of materials. In the present investigation, however, the G _max criterion has been modified in order to accommodate the consideration of plastic strain energy. This modified criterion is extended to study the fatigue crack growth characteristics of mixed-mode cracks. To predict crack propagation due to fatigue loads, a new elasto–plastic energy model is presented. This new model includes the effects of material properties such as strain hardening exponent n, yield strength σ _y , and fracture toughness and stress intensity factor ranges. The results obtained are compared with those obtained using the commonly employed crack growth law and the experimental data.     

含噪双稳杜芬振子矩方程的分岔与随机共振

研究了含噪声的双稳杜芬振子矩方程的分岔与随机共振的关系，并根据它们的关系, 从另 一个角度揭示了随机共振发生的机制. 首先在It?方程的基础上，导出了双稳杜芬振子在白噪声和弱周期信号作用下的矩方程，其次以噪声强度 为分岔参数分析了矩方程的分岔特性，再次分析了矩方程的分岔与双稳杜芬振子随机共振 之间的关系，最后根据该对应关系从另一种观点提出了双稳杜芬振子随机共振的机制，该 机制是由于以噪声强度为分岔参数的矩方程发生了分岔，而分岔使得原系统响应均值的能量分布发生了转移，使能 量向频率等于输入信号频率的分量处集中，使得弱信号得到了放大，随机共振发生了.