Analysis of two stacked cylindrical dielectric resonators in a TE₁₀₂ microwave cavity for magnetic resonance spectroscopy

The frequency, field distributions and filling factors of a DR/TE??? probe, consisting of two cylindrical dielectric resonators (DR1 and DR2) in a rectangular TE??? cavity, are simulated and analyzed by finite element methods. The TE(+++) mode formed by the in-phase coupling of the TE??(δ)(DR1), TE??(δ)(DR2) and TE??? basic modes, is the most appropriate mode for X-band EPR experiments. The corresponding simulated B(+++) fields of the TE(+++) mode have significant amplitudes at DR1, DR2 and the cavity's iris resulting in efficient coupling between the DR/TE??? probe and the microwave bridge. At the experimental configuration, B(+++) in the vicinity of DR2 is much larger than that around DR1 indicating that DR1 mainly acts as a frequency tuner. In contrast to a simple microwave shield, the resonant cavity is an essential component of the probe that affects its frequency. The two dielectric resonators are always coupled and this is enhanced by the cavity. When DR1 and DR2 are close to the cavity walls, the TE(+++) frequency and B(+++) distribution are very similar to that of the empty TE??? cavity. When all the experimental details are taken into account, the agreement between the experimental and simulated TE(+++) frequencies is excellent. This confirms that the resonating mode of the spectrometer's DR/TE??? probe is the TE(+++) mode. Additional proof is obtained from B?(x), which is the calculated maximum x component of B(+++). It is predominantly due to DR2 and is approximately 4.4 G. The B?(x) maximum value of the DR/TE??? probe is found to be slightly larger than that for a single resonator in a cavity because DR1 further concentrates the cavity's magnetic field along its x axis. Even though DR1 slightly enhances the performance of the DR/TE??? probe its main benefit is to act as a frequency tuner. A waveguide iris can be used to over-couple the DR/TE??? probe and lower its Q to ≈150. Under these conditions, the probe has a short dead time and a large bandwidth. The DR/TE??? probe's calculated conversion factor is approximately three times that of a regular cavity making it a good candidate for pulsed EPR experiments.     

TLD measurements and Monte Carlo simulations for glandular dose and scatter fraction assessment in mammography: A comparative study

The main purpose of this study was to validate and compare Mean Glandular Dose (MGD) values obtained using Monte Carlo simulations with experimental values obtained from Entrance Surface Dose (ESD) and depth dose measurements performed in a Hospital mammography unit. ESD and depth dose were measured using ThermoLuminescent Dosimeters (TLDs), and a tissue equivalent mammography phantom recommended by the American College of Radiology (ACR). Measurements and Monte Carlo simulations were also compared with the MGD calculated using the Automatic Exposure Control (AEC) system of the mammographic unit. In the simulations the Doppler energy broadening effect was also taken into account. The simulated ESD are about 5%–10% higher than the measured ESD values. The deviation between the measured and simulated MGD values in the phantom is of about 15%. The MGD evaluated using the AEC system is smaller both with respect to the Monte Carlo simulation and experimental result by a factor of about 15% and 25% respectively. Moreover the BackScatter Factor (BSF) estimated by Monte Carlo simulations was used for the MGD calculation according to the Wu’s method. Finally the inclusion of the energy broadening effect on MGD calculation produces negligible variations on the simulated results.     

Electromechanical cracking in ferroelectrics driven by large scale domain switching

Experimental results indicate three regimes for cracking in a ferroelectric double cantilever beam (DCB) under combined electromechanical loading. In the loading, the maximum amplitude of the applied electric field reaches almost twice the coercive field of ferroelectrics. Thus, the model of small scale domain switching is not applicable any more, which is dictated only by the singular term of the crack tip field. In the DCB test, a large or global scale domain switching takes place instead, which is driven...     

光模块消光比的补偿方法

提出了一种新型光模块消光比补偿方法。该方法首先根据不同温度下驱动芯片上报电流的大小,结合光功率和消光比的计算公式,模拟出激光器光功率随电流及电压的变化曲线。然后根据要求调整激光器调制电流的大小,以保持消光比的稳定。该补偿方式有效地解决了光器件一致性较差的问题,可以将原来斜效率的指标适当放宽10%,从而提高了利用率和成品率,降低了模块生产成本。     

Hopping Transport and Stochastic Dynamics of Electrons in Plasma Layers

We investigate the stochastic dynamics and the hopping transfer of electrons embedded into two‐dimensional atomic layers. First we formulate the quantum statistics of general atom ‐ electron systems based on the tight‐binding approximation and express ‐ following linear response transport theory ‐ the quantum‐mechanical time correlation functions and the conductivity by means of equilibrium time correlation functions. Within the relaxation time approach an expression for the effective collision frequency is derived in Born approximation, which takes into account quantum effects and dynamic effects of the atom motion through the dynamic structure factor of the lattice and the quantum dynamics of the electrons. In the last part we derive Pauli equations for the stochastic electron dynamics including nonlinear excitations of the atomic subsystem. We carry out Monte Carlo simulations and show that mean square displacements of electrons and transport properties are in a moderate to high temperature regime strongly influenced by by soliton‐type excitations and demonstrate the existence of percolation effects (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ni原子双飞秒脉冲激光诱导击穿光谱的信号增强研究

在大气环境下采用波长为800nm,脉宽为30fs的飞秒激光研究了Ni的双脉冲激光诱导击穿光谱,与单飞秒脉冲激光诱导击穿光谱相比,双飞秒脉冲在最优的双脉冲相对延时下,其信号强度增强接近10倍,实验研究了双脉冲相对延时在0-1300ps范围内不同延时对激光诱导击穿光谱信号强度增强因子的影响。整个相对延时区域可以分为三个阶段：在0-50ps区域内信号增强因子是一个持续增大的过程,在50ps左右,达到一个最大值;在50-300ps区域内,信号增强因子呈现出一个先下降后上升的过程;在300-1300ps,信号增强因子基本保持不变。     

近红外光谱法预测粗皮桉木材气干密度的影响因素分析

采用近红外光谱分析技术,对粗皮桉木材气干密度校正模型的影响因素进行比较研究.使用直接测量法测量了粗皮桉木材的气干密度,并用近红外光谱仪采集试样的近红外漫反射光谱,对不同切面、厚度、含水率和粗糙度的粗皮桉木材试样的原始光谱进行二阶导数预处理并选择一定光谱段建立回归模型.以50～140个试样作为校正集建立木材气干密度的偏最...     

双曲余弦高斯列阵光束在湍流大气中的光束传输因子

本文推导出了双曲余弦高斯(ChG)列阵光束在湍流大气中的光束传输因子( M ^{2因子)的解析公式,并采用相对 M 2因子研究了湍流对 M 2因子的影响.研究表明,在湍流大气中 M 2因子不再是一个传输不变量,湍流使得 M 2因子增大.非相干合成情况下, M 2因子随着传输距离、光束参数、相对子光束间距和子光束数目的增大而增大.相干合成情况下, M 2因子随光束参数和相对子光束间距的增大呈现振荡上升.相干合成情况下的 M 2因子比 关键词： M2因子)')" href="#">光束传输因子(M2因子) 光束质量 双曲余弦高斯列阵光束 大气湍流}     

基于M2因子测量的大气湍流参数的确定方法

基于广义惠更斯-菲涅尔原理以及大气湍流理论,推导出部分相干光束在大气湍流中传输的光束传输M ^{2因子的解析表达式.定量分析了表征大气湍流参数的折射率结构常数 C2_n}和涡旋内尺度 l _{0对 M ^{2因子的影响,并由此提出了一种通过实验测量大气湍流中光束的 M 2因子,进而确定出大气湍流参数的新方法.研究结果表明,由于大气湍流对相干性好的光束影响更为明显,在测量中可采用具有高相干性的基模高斯光束作为测量光源,而测量装 关键词： 2因子')" href="#">光束传输 M 2因子 大气湍流参数 湍流折射率结构常数 湍流涡旋内尺度}}     

高功率光纤激光器二级抽运技术的理论分析

从理论上分析了高功率光纤激光器直接抽运和二级抽运的斜率效率和热管理问题. 计算结果表明:波长为975 nm的激光直接抽运产生波长为1070 nm的激光时,理论斜率效率为80%,但当抽运光功率为10 kW时,在强制水冷条件下纤芯极值温度也难以降到150 ℃以下;在二级抽运技术中,波长为1018 nm的激光抽运产生波长为1070 nm的激光时,若采用传统的包层抽运技术,其斜率效率不足20%,如果抽运功率填充因子由0.0025提高到0.1,则理论上斜率效率可由18.5%提高到80.9%,从而总斜率效率由15.5 关键词： 二级抽运 功率填充因子 斜率效率 热管理