Preconcentration and Determination of Chromium Species Using Octadecyl Silica Membrane Disks and Flame Atomic Absorption Spectrometry

A novel and selective method for the fast determination of trace amounts of chromium species in water samples has been developed. The procedure is based on the selective formation of chromium diethyldithiocarbamate complexes at different pH in the presence of Mn(II) as an enhancement agent of chromium signals followed by elution with organic eluents and determination by atomic flame absorption spectrometry. The maximum capacity of the employed disks was found to be (396±3) µg and (376±2) µg for Cr(III) and Cr(VI), respectively. The detection limit of the proposed method is 49 and 43 ng·L^?1 for Cr(III) and Cr(VI), respectively. The proposed method was successfully applied for determination of chromium species Cr(III) and Cr(VI) in different water samples.     

Spectrophotometric method for the determination of demeclocycline using sodium molybdate as analytical reagent

By means of spectroscopic methods it has been found that demeclocycline reacts with molybdate ions forming a complex compound [MoO₃HDMTC]^2–. The relative stability constant of this compound has been determined by applying spectrophotometric methods. Under optimum conditions for complex formation a very sensitive spectrophotometric method for the estimation of demeclocycline in the concentration range 5.0–35.1 g/ml is proposed. The detection limit of the method is 2.5 g/ml of demeclocycline. The relative standard deviation (n=10) varies between 0.76% and 1.46%. The method proved to be accurate and sensitive for the analysis of the demeclocycline content in tablets.     

Thermal decomposition of sodium nitrite and sodium nitrate pre-adsorbed on TiO2 surfaces

The thermal decomposition of sodium nitrite or nitrate pre-adsorbed upon TiO₂ surfaces has been investigated by employing several techniques as infrared spectroscopy (IR) and temperature programmed desorption in conjunction with mass spectrometry analysis (TPD-MS) to study the features observed during these thermal decompositions. Differential thermal analysis (DTA) in combination with X-ray diffraction analysis (XRD) were used to investigate the possibility of a solid state chemical reaction between the solid products originated from the thermal decomposition of the pre-adsorbed species and the TiO₂. On the basis of our results, various characteristic features of these thermal decomposition reactions will be discussed.This work was supported by JUNTA DE ANDALUCIA (financial support for research groups/1990).     

Electron Transport Properties of Ions in Aqueous Solutions of Sodium Selenite

Ion diffusion kinetics has been studied using the data of conductivity measurements for aqueous solutions of sodium selenite with different concentrations and at different temperatures. Molecular and ionic self-diffusion coefficients have been determined for infinitely dilute solutions in the temperature range 288 K-313 K. The limiting values of ion mobility and changes in the energies of translation of water molecules from ions’ hydration shell have been found. At elevated temperatures, ΔE _tr ⁰ increases for both ions in direct proportion to the crystallographic radius of the latter. Ion hydration numbers at 298 K have been calculated. The results of this study are interpreted in the light of Samoilov’s theory on positive and negative hydration of ions.Original Russian Text Copyright © 2004 by L. T. Vlaev and S. D. Genieva__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 870–876, September–October, 2004.     

Effect of Neck Formation on the Measurement of Dynamic Interfacial Tension in a Drop Volume Tensiometer

Dynamic interfacial tension values obtained by drop volume tensiometry will be affected under certain experimental conditions by the formation of a neck between the drop and the capillary tip. This phenomenon must be accounted for to obtain accurate values of interfacial tension. In this work, neck formation for a water–mineral oil system is studied under conditions where hydrodynamic effects can be neglected. A model originally developed for the determination of the surface tension of a suspended drop is modified for application to dynamic interfacial tensions of surfactant-containing liquids. The model relates apparent values of interfacial tension calculated from drops possessing necks to actual values. Experiments with Span 80 (sorbitan monooleate) and sodium dodecyl sulfate (SDS) surfactants in a mineral oil–water system are used to test the validity of the developed model. For the small tip diameter used, good agreement is obtained for Span 80 up to the critical micelle concentration, and for low concentrations of SDS, when the surfactant adsorption is diffusion-limited. In both cases, the neck diameter of the growing drop can be considered constant over the range of dynamic interfacial tensions tested.     

Complexation of 6-Deoxy-6-(aminoethyl)amino-β-cyclodextrin with Sodium Cholate and Sodium Deoxycholate

In order to study its guest binding and the inclusion phenomena, 6-deoxy-6-(aminoethyl)amino--cyclodextrin (CDN) was synthesised and its binding properties examined. The complexation phenomena of sodium cholate (NaC) and sodium deoxycholate (NaDC) with CDN has been monitored by the NMR method using ¹³C chemical shift data. The method of continuous variation Job's method has been used to determine the stoichiometry of these supramolecular complexes. The Job's plot confirms the 1 : 1 supramolecular complex for NaC: CDN and the 1 : 2 supramolecular complex for NaDC: CDN. The interaction of NaC and NaDC with CDN has been obtained through two-dimensional Rotational Nuclear Overhauser Effect Spectroscopy (ROESY) NMR. Equilibrium constants were also obtained from ¹³C chemical shift data (C-1, C-3 & C-4) at different pH values (7, 9, & 11).     

Poly(N-isopropylacrylamide). I. Interactions with sodium dodecyl sulfate measured by conductivity

Conductometric titration of poly(N-isopropylacrylamide) (polyNIPAM) with sodium dodecyl sulfate (SDS) gave two apparent transitions labeled C1 and C2. The C1 transition was independent of polyNIPAM concentration in the 0.05–0.3 wt % range, whereas C2 was proportional to the polymer concentration. C1 corresponded to the onset of binding of surfactant with polymer. Arguments based on a simple mass action model for micellization are presented to show that C2, the second transition, is not due to any simple explanation such as being the point above which only free micelles are formed with surfactant addition. The cloud point of polyNIPAM increased with the amount of bound surfactant. This was attributed to electrostatic contribution of bound sulfate groups to the increased solubility of polyNIPAM. © 1993 John Wiley & Sons, Inc.     

Pseudo-Binary Phase Diagram of LiNH2-MH (M = Na,K) Eutectic Mixture

The hunt for a cleaner energy carrier leads us to consider a source that produces no toxic byproducts. One of the targeted alternatives in this approach is hydrogen energy, which, unfortunately, suffers from a lack of efficient storage media. Solid-state hydrogen absorption systems, such as lithium amide (LiNH₂) systems, may store up to 6.5 weight percent hydrogen. However, the temperature of hydrogenation and dehydrogenation is too high for practical use. Various molar ratios of LiNH₂ with sodium hydride (NaH) and potassium hydride (KH) have been explored in this paper. The temperature of hydrogenation for LiNH₂ combined with KH and NaH was found to be substantially lower than the temperature of individual LiNH₂. This lower temperature operation of both LiNH₂-NaH and LiNH₂-KH systems was investigated in depth, and the eutectic melting phenomenon was observed. Systematic thermal studies of this amide-hydride system in different compositions were carried out, which enabled the plotting of a pseudo-binary phase diagram. The occurrence of eutectic interaction increased atomic mobility, which resulted in the kinetic modification followed by an increase in the reactivity of two materials. For these eutectic compositions, i.e., 0.15LiNH₂-0.85NaH and 0.25LiNH₂-0.75KH, the lowest melting temperature was found to be 307 °C and 235 °C, respectively. Morphological studies were used to investigate and present the detailed mechanism linked with this phenomenon.     

Screening an In-House Isoquinoline Alkaloids Library for New Blockers of Voltage-Gated Na+ Channels Using Voltage Sensor Fluorescent Probes: Hits and Biases

Voltage-gated Na⁺ (Na_V) channels are significant therapeutic targets for the treatment of cardiac and neurological disorders, thus promoting the search for novel Na_V channel ligands. With the objective of discovering new blockers of Na_V channel ligands, we screened an In-House vegetal alkaloid library using fluorescence cell-based assays. We screened 62 isoquinoline alkaloids (IA) for their ability to decrease the FRET signal of voltage sensor probes (VSP), which were induced by the activation of Na_V channels with batrachotoxin (BTX) in GH3b6 cells. This led to the selection of five IA: liriodenine, oxostephanine, thalmiculine, protopine, and bebeerine, inhibiting the BTX-induced VSP signal with micromolar IC₅₀. These five alkaloids were then assayed using the Na⁺ fluorescent probe ANG-2 and the patch-clamp technique. Only oxostephanine and liriodenine were able to inhibit the BTX-induced ANG-2 signal in HEK293-hNa_V1.3 cells. Indeed, liriodenine and oxostephanine decreased the effects of BTX on Na⁺ currents elicited by the hNa_V1.3 channel, suggesting that conformation change induced by BTX binding could induce a bias in fluorescent assays. However, among the five IA selected in the VSP assay, only bebeerine exhibited strong inhibitory effects against Na⁺ currents elicited by the hNav1.2 and hNav1.6 channels, with IC₅₀ values below 10 µM. So far, bebeerine is the first BBIQ to have been reported to block Na_V channels, with promising therapeutical applications.     

海藻酸钠-壳聚糖-海藻酸钠生物微胶囊的制备

采用两步法制备了海藻酸钠-壳聚糖-海藻酸钠(ACA)生物微胶囊,并考察了氯化钙浓度、海藻酸钠浓度、壳聚糖浓度及其pH值以及柠檬酸钠溶液pH值对微胶囊性能的影响.实验结果表明:胶囊粒径随氯化钙浓度和海藻酸钠浓度的增加而增大,胶囊的膜厚随壳聚糖浓度的增加而增厚,随壳聚糖溶液pH值的增加而降低;而在胶囊液化处理过程中,柠檬酸钠溶液的pH值对微胶囊的机械强度有很大的影响.当氯化钙浓度为1.5%,海藻酸钠浓度为2%,壳聚糖浓度和pH值分别为1.5%和5.0及柠檬酸钠溶液的pH值为7.2时,可制得粒径为2.65mm、机械强度为150mN的ACA生物微胶囊.