Synthesis of Polylactide: Effect of Dispersion of the Initiator

The ring opening polymerization of L-lactide was studied in bulk using stannous octoate as initiator. In some experiments, triphenylphosphine, a Lewis base was also used as co-initiator. The polymerization was carried out at 130°C up to 29 h. The monomer was used after recrystallizing three times with dry toluene. Experiments were carried out using a wide range of monomer to initiator ratio. The averages and distributions of molar masses of resulting PLA have been determined by means of size exclusion chromatography, SEC. It is shown that the (mode, process) procedure of dispersion of the catalyst in polymerization system affects the molar mass distribution of the product as is evidenced by the bimodality or even trimodality observed in the SEC chromatograms.     

载银sod基纳米分子筛的合成及抗菌性能

采用两步法合成了 sod 基系列分子筛(EMT、FAU、SOD),并通过离子交换法引入 Ag⁺得到载银分子筛,通过 X 射线衍射(XRD)、扫描电子显微镜(SEM)证明离子交换前后分子筛骨架结构和晶粒尺寸没有发生明显变化;通过红外光谱(IR)、热重(TG)证明制得的载银分子筛具有良好的稳定性;对获得的载银分子筛进行了Ag⁺释放实验与抗菌能力测试,考察了分子筛种类和晶粒尺寸对抗菌性能的影响。结果表明具有笼状结构的FAU与EMT分子筛因可储存更多的Ag⁺而具有更好的抗菌性能,而具有超笼结构的 FAU 分子筛抗菌性能最优。通过对比不同晶粒尺寸载银 FAU 分子筛抗菌数据发现,晶粒尺寸为 100 nm 的载银FAU分子筛因外表面丰富的抗菌活性位点以及其内部可以储存并不断释放 Ag⁺而具有最优的抗菌性能和抗菌寿命。而晶粒尺寸为10 nm的载银FAU分子筛由于晶粒尺寸较小、外比表面积大、扩散路径短,Ag⁺的释放速率最快,抗菌效率最高。     

Carbon/carbon supercapacitors

Supercapacitors, or electrochemical capacitors, are a power storage system applied for harvesting energy and delivering pulses during short periods of time. The commercially available technology is based on charging an electrical double-layer (EDL), and using high surface area carbon electrodes in an organic electrolyte. This review first presents the state-of-the-art on EDL capacitors, with the objective to better understand their operating principles and to improve their performance. In particular, it is shown that capacitance might be enhanced for carbons having subnanometric pores where ions of the electrolyte are distorted and partly desolvated. Then, strategies for using environment friendly aqueous electrolytes are presented. In this case, the capacitance can be enhanced through pseudo-faradaic contributions involving i) surface functional groups on carbons, ii) hydrogen electrosorption, and iii) redox reactions at the electrode/electrolyte interface. The most promising system is based on the use of aqueous alkali sulfate as electrolyte allowing voltages as high as 2 V to be reached, due to the high overpotential for di-hydrogen evolution at the negative electrode.     

Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

Effect of Emulsification Method on the Properties of Lecithin‐ and PGPR‐Stabilized Water‐in‐Oil‐Emulsions

Water‐in‐oil (w/o) emulsions were prepared with phosphatidylcholine‐depleted lecithin or polyglycerol polyricinoleate (PGPR) as emulsifying agents. The effect of different laboratory emulsification devices and the effect of sodium chloride on particle size distribution, coalescence stability, and water droplet sedimentation were investigated. The properties of lecithin‐stabilized w/o emulsions were found to depend more strongly on the emulsifying method than those prepared with PGPR. The rotor‐stator system was not suitable for preparing stable w/o emulsions with lecithin. Whereas the addition of salt was essential to achieve coalescence‐stable emulsions prepared with PGPR, the presence of NaCl favored the coalescence of water droplets and phase separation in emulsions containing lecithin.     

Continuous Spectroscopy Characterization of Emulsions

In emulsion polymerization, the formation of particles has an important effect on the rate of reaction and on the final properties of the latex. To investigate particle nucleation mechanisms in emulsion polymerization it is necessary to establish the initial conditions of the emulsified system before the reaction takes place. This research reports on a technique to continuously monitor the droplet size distribution of liquid-liquid emulsions using spectroscopy. The on-line particle characterization methodology is based on an integrated sampling and dilution strategy combined with spectroscopy methods. It is shown that the sampling system integrated with a multiwavelength turbidity detector provides reliable estimates of droplet populations as function of the dispersed phase concentration in emulsions of saturated hydrocarbons. The results provide not only the groundwork necessary for the elucidation of particle nucleation during emulsion polymerization process but also suggests the potential of this combined technology to further our understanding of liquid-liquid emulsions.     

Characterization of Colloidal Gas Aphron-Fluids Produced from a New Plant-Based Surfactant

Colloidal gas aphrons (CGAs) are gas bubbles with diameters ranging from 10 to 100 microns, generated by intense stirring of a surfactant solution at high speed. The surface activity and aggregation behavior of the surfactant affects the size/size distribution, stability, and other physicochemical properties of generated aphrons. Therefore, selection of a suitable surfactant is important for the generation of microbubbles with the desired properties. The goal of this articleis to investigate the potential use of a new plant-derived surfactant as an aphronizer surfactant in preparation of CGA-based drilling fluids for accomplishing desirable rheological and filtration properties. For this purpose, natural surfactant obtained from leaves of special tree, namely, Zizyphusspina Christi and used for preparation of aphron-based fluids. To achieve the research objectives, laboratory tests of suspension generation, microscopic visualization, initial yield, filtration loss, and rheological characterization with varying concentrations of surfactant and polymer were performed. Experimental results demonstrate that newly proposed biosurfactant has a great potential for application in preparation of CGA-based drilling fluids for implementation in petroleum drilling industry.