小波包去噪信号的分形特征

将分形理论与小波包滤波相结合，用盒维数的大小来评判信号曲线的滤波情况。随着小波包分解尺度的增大，滤波后信号曲线的盒维数逐渐减小，并最后趋于稳定值。因此可以根据盒维数-分解尺度曲线来选择最佳分解尺度。对仿真含噪信号进行了滤波实验，结果表明：即使在信噪比低至0．5时仍能得到较好的结果，并且该法用于毛细管电泳实验数据的处理结果同样令人满意。     

聚偏氟乙烯取向薄膜的结晶形态

本文用小角激光散射法研究了聚偏氟乙烯薄膜在拉伸取向过程中晶体形态及结构的变化。拉伸使球晶形变为椭球,同时伴随着局部熔融与重结晶过程,散射图案由原来的四叶瓣发展为八叶瓣。红外测量及X-射线衍射分析表明,拉伸引起分子链构象改变,使晶型发生了转变。     

基于Cz-DPP不对称D-A结构新型有机小分子光伏材料的合成与性质

本文设计合成了一系列以咔唑(CZ)和吡咯并吡咯二酮(DPP)为基本结构单元的D-A结构的新型小分子材料,并对其进行了一系列的性能表征.合成的材料以咔唑作为给电子单元,吡咯并吡咯二酮作为吸电子单元,采用三键作为π桥,并引入4-氟苯基、4-氰基苯基和4-甲氧基苯基作为末端取代基团对材料进行修饰.其中材料CZBTDPPF和CZBTDPPO因分别具有1.85和1.79 eV的较窄带隙而分别获得了相对较高的的光电转化效率(1.97%和1.91%).由此可见,引入4-氟苯基和4-甲氧基苯基作为末端取代基团对于延长材料共轭结构、拓宽材料吸收从而实现材料光伏性能的提升具有重要的作用.     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

Isomers of C20: an energy profile III

Semiempirical calculations, at the PM3 level provided within the Winmopac v2.0 software package, are used to geometrically optimize and determine the absolute energies (heats of formation) of a variety of C(20) isomers that are predicted to exist in and around the ring and cage isomers. Using the optimized Cartesian coordinates for the ring and the cage isomers, a saddle-point calculation was performed. The resulting energy profile, consisting of a series of peaks and valleys, is used as a starting point for the identification and location of fifteen additional isomers of C(20) that are predicted to be energetically stable, both via geometry optimizations and force constant analysis. These additional isomers were subsequently determined to lie adjacent to one another on the potential surface and establish a step-wise transformation between the ring and the cage. Transition-state optimization of the Cartesian coordinates at the saddle point between adjacent isomers was performed to quantify the energy of the transition state. The step-wise process from one isomer to another, which extends out over the three-dimensional surface, is predicted to require approximately 15% less energy than that of the direct, two-dimensional transformation predicted in the bowl-cage profile. However, the net atomic rearrangement for the step-wise process is about four times greater than that of the direct process. Although less in energy, the amount of atomic rearrangement in the step-wise process would make the occurrence of such a route prohibitive. Utilizing the direct distance separating the three primary isomers (ring, bowl, cage), the method of triangulation is performed to quantitatively position other C(20) structures on the potential surface, relative to the ring, bowl, and cage isomers.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。     

Importance of the choice of assumptions and models in the estimation of analytical quality specifications

The validity of any model depends on its ability to imagine the situation or problem to which it is applied. Further, the assumptions made in relation to the model are determining for the actual outcome. Within the field of clinical biochemistry a lot of models for analytical quality specifications, based on a variety of concepts and ’clinical settings’, have been proposed. A hierarchical structure for application of these approaches and models has been agreed on at several occasions in 1999. In this hierarchy, the highest rank is given to evaluation of analytical quality specifications based on ’clinical settings’/’clinical outcome’ models, followed by specifications based on biological variation and on ’clinicians opinions’. This contribution, deals with the problems of combining random and systematic errors and the implications of application of different models to a variety of clinical settings. Received: 1 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium     

Calculation of harmonic force constants,vibrational frequencies and integrated intensities of some organic molecules using the MINDO—Forces method

The harmonic force constants, vibrational frequencies and integrated intensity ratios of CH₂, H₂O, CH₂O, C₂H₂, CO₂, HCN, CH₃, CH₄, and C₂H₄ have been calculated using the MINDO—FORCES program and the Pulay method for the calculation of the molecular force constants. The results obtained are in general quite satisfactory when compared with available literature values. The results are, however, not as satisfactory in case of molecules containing heteroatoms, due to the neglect of some dipolar repulsion integrals for the heteroatoms by the MINDO/3 method. Calculated integrated intensities for CH₃ and C₂H₄ agree well with experimental results. The calculated integrated intensities for other molecules are obtained for the first time and no comparison with published data is therefore possible.Part of the M.Sc. Thesis of K. H. A. 1978.     

Reconstructing small perturbations of an obstacle for acoustic waves from boundary measurements on the perturbed shape itself

We derive relationships between the shape deformation of an impenetrable obstacle and boundary measurements of scattering fields on the perturbed shape itself. Our derivation is rigorous by using a systematic way, based on layer potential techniques and the field expansion (FE) method (formal derivation). We extend these techniques to derive asymptotic expansions of the Dirichlet-to-Neumann (DNO) and Neumann-to-Dirichlet (NDO) operators in terms of the small perturbations of the obstacle as well as relationships between the shape deformation of an obstacle and boundary measurements of DNO or NDO on the perturbed shape itself. All relationships lead us to very effective algorithms for determining lower order Fourier coefficients of the shape perturbation of the obstacle.