Application of accelerated heteronuclear single quantum coherence experiments to the rapid quantification of monosaccharides and disaccharides in dairy products

Monosaccharides and disaccharides are important dietary components, but if insufficiently metabolized by some population subgroups, they are also linked to disease patterns. Thus, the correct analytical identification, quantification, and labeling of these food components are crucial to inform and potentially protect consumers. Enzymatic assays and high-performance anion-exchange chromatography with pulsed amperometric detection are established methods for the quantification of monosaccharides and disaccharides that, however, require long measuring times (60–180 min). Accelerated methods for the identification and quantification of the nutritionally relevant monosaccharides and disaccharides d -glucose, d -galactose, d -fructose, sucrose, lactose, and maltose were therefore developed. To realize this goal, the NMR experiments HSQC (heteronuclear single quantum coherence) and acceleration by sharing adjacent polarization (ASAP)-HSQC were applied. Measurement times were reduced to 27 and 6 min, respectively, by optimizing the interscan delay and applying non-uniform sampling. The optimized methods were used to quantify d -glucose, d -galactose, d -fructose, sucrose, and lactose in various dairy products. Results of the HSQC and ASAP-HSQC methods are equivalent to the results of the reference methods in terms of both precision and accuracy, demonstrating that these methods can be used to correctly analyze nutritionally relevant monosaccharides and disaccharides in short times.     

Siloxanes in Biogas: Approaches of Sampling Procedure and GC-MS Method Determination

A new approach of siloxane sampling based on impinger, micro-impinger, adsorption on active carbon, and direct TedlarBag methods followed by gas chromatography-mass spectrometry (GC-MS) was developed for the analysis of three linear (L2–L4) and four cyclic (D3–D5) volatile methyl siloxanes (VMSs). Three kinds of organic liquid-medium characterized by different polarities, namely acetone, methanol, and d-decane as siloxanes trap were arranged in the experiment which is widely discussed below. Thus, the GC-MS equipped with SUPELCOWAX-10 capillary column was employed to perform monitoring of VMS content in the analyzed biogas samples originating from landfill, wastewater treatment plants, and agriculture biogas plants. In all samples that have undergone the analysis, cyclic and linear VMSs were found in quantities exceeding 107.9 and 3.8 mg/m³, respectively. Significant differences between siloxanes concentrations depending on biogas origin were observed. Moreover, the high range of linearity (0.1 to 70.06 mg/m³), low LoD (0.01 mg/m³), low LoQ (0.04 mg/m³), and high recovery (244.1%) indicate that the procedure and can be applied in sensitive analyses of silica biogas contaminants. In addition to the above, the impinger method of sampling performed better than active-carbon Tube and TedlarBag, particularly for quantifying low concentrations of siloxanes. Overall, the evaluation of sampling methods for biogas collection simplified the analytical procedure by reducing the procedural steps, avoiding the use of solvents, as well as demonstrated its applicability for the testing of biogas quality.     

Nonuniform sampling and maximum entropy reconstruction applied to the accurate measurement of residual dipolar couplings

Residual dipolar couplings (RDC) provide important global restraints for accurate structure determination by NMR. We show that nonuniform sampling in combination with maximum entropy reconstruction (MaxEnt) is a promising strategy for accelerating and potentially enhancing the acquisition of RDC spectra. Using MaxEnt-processed spectra of nonuniformly sampled data sets that are reduced up to one fifth relative to uniform sampling, accurate 13C'-13Calpha RDCs can be obtained that agree with an RMS of 0.67 Hz with those derived from uniformly sampled, Fourier transformed spectra. While confirming that frequency errors in MaxEnt spectra are very slight, an unexpected class of systematic errors was found to occur in the 6th significant figure of 13C' chemical shifts of doublets obtained by MaxEnt reconstruction. We show that this error stems from slight line shape perturbations and predict it should be encountered in other nonlinear spectral estimation algorithms. In the case of MaxEnt reconstruction, the error can easily be rendered systematic by straightforward optimization of MaxEnt reconstruction parameters and self-cancels in obtaining RDCs from nonuniformly sampled, MaxEnt reconstructed spectra.     

CCD抽样对傅里叶变换轮廓术的影响

从傅里叶变换轮廓术(FTP)原理入手,分析了傅里叶变换过程中频谱的产生,给出了CCD像元信号强度及其经抽样后的变形条纹的表达式,得出了变形条纹的傅里叶频谱式,其频谱是原连续函数的频谱在频域内的无限重复,即"频谱岛"。频谱中除了基频外,还产生了二级、三级等的高级频谱。给出了抽样条件及满足抽样条件的方法:当抽样频率与光栅基频的比值m>4时可以恢复物体的面形,反之不能;减小抽样间隔可以使m>4。给出了实验结果:当m=2.0883时,物体面形没有恢复;当m=16.6667时,物体面形得到了恢复。实验结果证明了理论分析的正确性。     

基于NI-DAQ的高采样实时数据绘制方法与实现

飞行试验实时监控中,对高采样数据通常采用曲线绘制进行分析与故障判断,这对数据绘制的实时性、精确性以及曲线长度等都提出了较高的要求。本文对基于NI-DAQ的曲线绘制方法进行了研究和软件设计,实现了客户端的高采样数据实时绘制与打印输出。结果证明,采用该方法绘制的参数曲线可以满足实时监控要求。     

Rapid Characterization of Molecular Diffusion by NMR Spectroscopy

An NMR‐based approach for rapid characterization of translational diffusion of molecules has been developed. Unlike the conventional method of acquiring a series of 2D ¹³C and ¹H spectra, the proposed approach involves a single 2D NMR spectrum, which can be acquired in minutes. Using this method, it was possible to detect the presence of intermediate oligomeric species of diphenylalanine in solution during the process of its self‐assembly to form nanotubular structures.     

NMR波谱仪集中优化管理模式

论述了核磁中心采用的相对集中管理模式.集中管理模式主要体现在上样辅助、中央供气、数据集中上传与下载3个方面.另外,还提出了未来可以从集中供高纯N2和LN22个方面进一步改善中心的集中管理模式,从而能够更好的优化测试效率和工作环境.     

Direct Derivation of Free Energies of Membrane Deformation and Other Solvent Density Variations From Enhanced Sampling Molecular Dynamics

We report a methodology to calculate the free energy of a shape transformation in a lipid membrane directly from a molecular dynamics simulation. The bilayer need not be homogeneous or symmetric and can be atomically detailed or coarse grained. The method is based on a collective variable that quantifies the similarity between the membrane and a set of predefined density distributions. Enhanced sampling of this “Multi-Map” variable re-shapes the bilayer and permits the derivation of the corresponding potential of mean force. Calculated energies thus reflect the dynamic interplay of atoms and molecules, rather than postulated effects. Evaluation of deformations of different shape, amplitude, and range demonstrates that the macroscopic bending modulus assumed by the Helfrich–Canham model is increasingly unsuitable below the 100-Å scale. In this range of major biological significance, direct free-energy calculations reveal a much greater plasticity. We also quantify the stiffening effect of cholesterol on bilayers of different composition and compare with experiments. Lastly, we illustrate how this approach facilitates analysis of other solvent reorganization processes, such as hydrophobic hydration. Published 2019. This article is a U.S. Government work and is in the public domain in the USA.     

G-Protein-Coupled Receptor–Membrane Interactions Depend on the Receptor Activation State

G-protein-coupled receptors (GPCRs) are the largest family of human membrane proteins and serve as primary targets of approximately one-third of currently marketed drugs. In particular, adenosine A₁ receptor (A₁AR) is an important therapeutic target for treating cardiac ischemia–reperfusion injuries, neuropathic pain, and renal diseases. As a prototypical GPCR, the A₁AR is located within a phospholipid membrane bilayer and transmits cellular signals by changing between different conformational states. It is important to elucidate the lipid–protein interactions in order to understand the functional mechanism of GPCRs. Here, all-atom simulations using a robust Gaussian accelerated molecular dynamics (GaMD) method were performed on both the inactive (antagonist bound) and active (agonist and G-protein bound) A₁AR, which was embedded in a 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) lipid bilayer. In the GaMD simulations, the membrane lipids played a key role in stabilizing different conformational states of the A₁AR. Our simulations further identified important regions of the receptor that interacted distinctly with the lipids in highly correlated manner. Activation of the A₁AR led to differential dynamics in the upper and lower leaflets of the lipid bilayer. In summary, GaMD enhanced simulations have revealed strongly coupled dynamics of the GPCR and lipids that depend on the receptor activation state. © 2019 Wiley Periodicals, Inc.     

吸收液采样-顶空-气相色谱法测定废气中吡啶

用吸收液采集废气样品,顶空进样,采用气相色谱法测定进样气体中吡啶的含量。用DB-FFAP毛细管色谱柱分离,氢火焰离子化检测器测定。优化的试验条件如下:①采用多孔玻板吸收瓶采集样品;②吸收液的体积为45mL;③采样流量为0.5L·min^-1;④样品在4℃下,7d内完成分析;⑤吸收液的pH大于12;⑥加入3g氯化钠调节吸收液离子强度;⑦顶空温度为80℃,顶空平衡时间为30min。吡啶的质量浓度在100mg·L^-1以内与其对应的峰面积呈线性关系,检出限为0.05 mg·m^-3。对3个不同浓度水平的吡啶标准气体进行测定,相对误差为-8.0%^-4.7%,测定值的相对标准偏差(n=6)为1.3%~7.8%。