偏轴双腔互比型腔式束流位置监测器

 提出一种利用偏轴双腔来监测电子束位置的新方法,根据谐振腔归一化分流阻抗参数分析了其工作原理和主要特性。偏心束流在偏轴谐振腔中激发出较强的偶极模TM₁₁₀信号,根据两腔输出的偶极模信号幅度比可直接测量束流的中心偏移量。偶极模信号幅度变化反映了束流的偏移方向,省去了鉴相工作,简化了前端接收电路的的设计,基模抑制问题已被解决。利用MAFIA和HFSS软件对本征模进行仿真,并分析了模式耦合特性,仿真结果验证了新结构的可行性。     

PET Imaging of the Neuropeptide Y System: A Systematic Review

Neuropeptide Y (NPY) is a vastly studied biological peptide with numerous physiological functions that activate the NPY receptor family (Y₁, Y₂, Y₄ and Y₅). Moreover, these receptors are correlated with the pathophysiology of several diseases such as feeding disorders, anxiety, metabolic diseases, neurodegenerative diseases, some types of cancers and others. In order to deepen the knowledge of NPY receptors’ functions and molecular mechanisms, neuroimaging techniques such as positron emission tomography (PET) have been used. The development of new radiotracers for the different NPY receptors and their subsequent PET studies have led to significant insights into molecular mechanisms involving NPY receptors. This article provides a systematic review of the imaging biomarkers that have been developed as PET tracers in order to study the NPY receptor family.     

变形镜部分驱动器断电失效对校正性能的影响

变形镜在长期工作的过程中,压电陶瓷驱动器因累积疲劳效应会导致其失效,从而导致校正性能的降低.从变形镜的影响函数出发,将失效驱动器的电压置零,采用有限元方法建立变形镜疲劳失效模型,重点分析畸变波前的形态分布、入射光束的类型和驱动器的排布方式等对校正能力的影响.实验结果表明,在部分驱动器失效的情况下,变形镜应当根据高斯型随...     

Radiochemistry,Production Processes,Labeling Methods,and ImmunoPET Imaging Pharmaceuticals of Iodine-124

Target-specific biomolecules, monoclonal antibodies (mAb), proteins, and protein fragments are known to have high specificity and affinity for receptors associated with tumors and other pathological conditions. However, the large biomolecules have relatively intermediate to long circulation half-lives (>day) and tumor localization times. Combining superior target specificity of mAbs and high sensitivity and resolution of the PET (Positron Emission Tomography) imaging technique has created a paradigm-shifting imaging modality, ImmunoPET. In addition to metallic PET radionuclides, ¹²⁴I is an attractive radionuclide for radiolabeling of mAbs as potential immunoPET imaging pharmaceuticals due to its physical properties (decay characteristics and half-life), easy and routine production by cyclotrons, and well-established methodologies for radioiodination. The objective of this report is to provide a comprehensive review of the physical properties of iodine and iodine radionuclides, production processes of ¹²⁴I, various ¹²⁴I-labeling methodologies for large biomolecules, mAbs, and the development of ¹²⁴I-labeled immunoPET imaging pharmaceuticals for various cancer targets in preclinical and clinical environments. A summary of several production processes, including ¹²³Te(d,n)¹²⁴I, ¹²⁴Te(d,2n)¹²⁴I, ¹²¹Sb(α,n)¹²⁴I, ¹²³Sb(α,3n)¹²⁴I, ¹²³Sb(³He,2n)¹²⁴I, ^natSb(α, xn)¹²⁴I, ^natSb(³He,n)¹²⁴I reactions, a detailed overview of the ¹²⁴Te(p,n)¹²⁴I reaction (including target selection, preparation, processing, and recovery of ¹²⁴I), and a fully automated process that can be scaled up for GMP (Good Manufacturing Practices) production of large quantities of ¹²⁴I is provided. Direct, using inorganic and organic oxidizing agents and enzyme catalysis, and indirect, using prosthetic groups, ¹²⁴I-labeling techniques have been discussed. Significant research has been conducted, in more than the last two decades, in the development of ¹²⁴I-labeled immunoPET imaging pharmaceuticals for target-specific cancer detection. Details of preclinical and clinical evaluations of the potential ¹²⁴I-labeled immunoPET imaging pharmaceuticals are described here.     

Tuning Tetrazole Photochemistry for Protein Ligation and Molecular Imaging

Photochemistry provides a wide range of alternative reagents that hold potential for use in bimolecular functionalisation of proteins. Here, we report the synthesis and characterisation of metal ion binding chelates derivatised with disubstituted tetrazoles for the photoradiochemical labelling of monoclonal antibodies (mAbs). The photophysical properties of tetrazoles featuring extended aromatic systems and auxochromic substituents to tune excitation toward longer wavelengths (365 and 395 nm) were studied. Two photoactivatable chelates based on desferrioxamine B (DFO) and the aza-macrocycle NODAGA were functionalised with a tetrazole and developed for protein labelling with ⁸⁹Zr, ⁶⁴Cu and ⁶⁸Ga radionuclides. DFO-tetrazole ( 1 ) was assessed by direct conjugation to formulated trastuzumab and subsequent radiolabelling with ⁸⁹Zr. Radiochemical studies and cellular-based binding assays demonstrated that the radiotracer remained stable in vitro retained high immunoreactivity. Positron emission tomography (PET) imaging and biodistribution studies were used to measure the tumour specific uptake and pharmacokinetic profile in mice bearing SK-OV-3 xenografts. Experiments demonstrate that tetrazole-based photochemistry is a viable approach for the light-induced synthesis of PET radiotracers.     

Free volume characteristics of 2,2-bistrifluoromethyl-4,5-difluoro-1,3-dioxole-co-tetrafluoroethylene copolymers: Effect of composition and molecular weight

2,2-bistrifluoromethyl-4,5-difluoro-1,3-dioxole-co-tetrafluoroethylene (PDD-TFE) copolymer is a good candidate to prepare gas separation membranes with excellent permeability due to its free volume characteristics. However, the influence of PDD-TFE copolymer structure on its free volume characteristics is less studied. In this paper, PDD-TFE copolymers with different compositions and molecular weights were synthesized, and their free volume characteristics were analyzed by positron annihilation lifetime spectroscopy and a molecular dynamics simulation. It indicated that the molar fraction of PDD in copolymers had a significant effect on free volume characteristics, while the molecular weight of copolymers exerted a slight influence on free volume when the molecular weight exceeded a critical region (intrinsic viscosity [η] > 68 ml g⁻¹). PDD-TFE copolymers with greater PDD molar fractions (i.e., 72% and 84%) showed bimodal distributions in positron lifetime and free volume size distributions, while PDD-TFE copolymers with lower PDD molar fractions (i.e., 27% and 35%) exhibited a single peak. The long-lifetime parameter τ₃ was assigned to micro-cavities formed by [-(TFE)_y-PDD-] segments and τ₄ was attributed to micro-cavities formed by [-(PDD)_x-TFE-] segments. The cis and trans transitions of PDD led to a local multilayer spiral structure with a 2.6–4.3 Å layer spacing, which would also increase the free volume of copolymers.     

脉冲高功率离子二极管的动力学模拟

基于等离子体的爆炸发射模型,利用自洽的2.5维的胞中粒子（PIC）模拟程序MAGIC模拟了平板型磁绝缘离子二极管中电子和质子的动力学特性。给出了电压为300kV,外加磁场为2倍临界磁场情况下的二极管特性,阴阳极间隙中带电粒子的空间和相空间分布,以及净电荷密度分布和电场分布,结果表明,引出束流密度比单离子Child-Langmuir公式计算的结果大5倍;外加磁场导致在阴极附近形成虚阴极。空间电荷使得阴阳极间隙中电场扰动和增强。     

过模慢波结构频率反射特性及谐振腔的影响

利用有限元方法求解:S-参数矩阵,研究了过模慢波结构对圆波导TM01,TM02模的反射特性,分析了在慢波结构末端加入谐振腔后,由于两端口的不对称性而造成的对反射特性影响。结果表明,在TM01的π模频率附近,慢波结构和谐振腔组成的系统对无谐振腔一侧端口入射TM01模的反射增大,而对有谐振腔一侧端口入射TM01模的反射减小。根据计算结果,解释了普通多波切伦柯夫振荡器所用慢波结构周期数较多的原因,说明了在多波切伦柯夫振荡器中引入谐振腔后,不但可以减少所用慢波结构周期数,而且有利于提高微波输出效率。     

电子束、离子辅助和离子束溅射三种工艺对光学薄膜性能的影响

运用电子束、离子辅助和离子束溅射三种镀膜工艺分别制备光学薄膜,包括单层氧化物薄膜和增透膜,然后采取一系列测试手段,如Zygo轮廓仪、原子力显微镜、表面热透镜技术和X射线衍射等技术,来分析和研究不同的工艺对这些薄膜性能的不同影响,以判断合理的沉积工艺。     

离子通道电子束回旋脉塞的等离子体波效应

研究了离子通道回旋电子束脉塞（ICECM）中的等离子体波非线性效应。利用流体理论与自洽非线性理论方法对ICECM中等离子体波效应的微观机理进行了分析。研究发现,等离子体波加强了电子束的纵向群聚,束-波互作用的能量交换效率及系统增益得到明显提高。数值模拟计算表明,对于中等等离子体密度、1.5kA电流和1MV加速电压的电子束,系统能够获得的脉冲功率和频率分别为200MW和280GHz的毫米波束。