Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

无保护流体室温燐光法测定吲哚-3-丁酸的研究

在仅以碘化钾为重原子微扰剂、亚硫酸钠为除氧剂及无任何保护性介质存在的水溶液中 ,吲哚_3_丁酸 (IBA)能发射很强的室温光 (RTP) ;详细研究了分析测定条件及有机溶剂对RTP的影响 ;在最大光波长λex/λem =281/447nm处 ,光强度与IBA浓度在2.0×10 -7～1.0×10 -5mol/L范围内呈良好的线性关系 ,检出限4.3×10-8 mol/L ;方法直接用于强化水样和土壤中IBA的测定 ,回收率96 %～104 % ,相对标准偏差2.37 %～3.97 %。     

New Temperature Integral Approximate Formula for Non-isothermal Kinetic Analysis

A new approximate formula for temperature integral is proposed. The linear dependence of the new fomula on x has been established. Combining this linear dependence and integration-by-parts, new equation for the evaluation of kinetic parameters has been obtained from the above dependence. The validity of this equation has been tested with data from numerical calculating. And its deviation from the values calculated by Simpson's numerical integrating was discussed. Compared with several published approximate formulae, this new one is much superior to all other approximations and is the most suitable solution for the evaluation of kinetic parameters from TG experiments. This revised version was published online in August 2006 with corrections to the Cover Date.     

Capillary electrophoresis separation of heterocyclic nitrosoamino acid-conformers at sub-ambient temperatures

The separation of a selected group of naturally occurring, heterocyclic nitrosoamino acids was achieved by capillary zone electrophoresis and the resolution of the syn and anti conformers improved as the temperature was lowered to 5 °C. The double peaks observed for each nitrosoamino acid are probably caused by the slow kinetics of conformational isomerism. The experimental setup consisted of a P/ACE 5510 electrophoresis system, a 57 cm polyacrylamidecoated capillary, and a 10 mM phosphate buffer, pH 7.2, containing 2 mM of 3-(N-N-dimethylmyristylammonio)propanesulfonate (DMMAPS) and 0.1% Tween 20. Our study shows that (a) the lower the temperature, the greater the resolution and the longer the migration times; and (b) different nitrosoamino acid conformers were resolved at different temperatures because of differences in the rate of isomerization. For example, the conformers of N-nitrosothiazolidine-4-carboxylic acid were partially resolved at 30 °C while those of N-nitrosoproline were well resolved at the same temperature.     

Efficiency of radiation-induced main-chain scission of poly (methyl methacrylate) depends on the irradiation temperature because of coexisting monomer

Effect of irradiation temperature on the main-chain scission of poly (methyl methacrylate) (PMMA) caused by γ-irradiation was studied by means of gel permeation chromatography and ESR spectroscopy. Although no temperature dependency was observed on the scission efficiency for purified PMMA, the efficiency for crude or monomer-doped purified PMMA was decreased by decreasing the temperature below ca. 200 K. Above 200 K the efficiency was constant and did not depend on the purity of PMMA. ESR study of the irradiated PMMA revealed that the suppression of the scission below 200 K is induced by the addition of methyl methacrylate monomer to primary radical species, which otherwise cause the main-chain scission by warming the polymer above 200 K. The primary radical generated above 200 K immediately converts to the scission-type ? CH₂ ? ?(CH₃) COOCH₃ radical through the β-scission of the polymer main chain, so that the efficiency of the scission does not depend on both the impurity and the irradiation temperature. © 1994 John Wiley & Sons, Inc.     

On the self-association of the normal alcohols and the glass transition in alcohol-alcohol solutions

The glass-transition temperature (T_g) in mutual binary mixtures of the primary alkanols from methanol throughn-octanol has been measured as a function of composition. For mixtures of the alkanols heavier than ethanol,T _g is found to be a linear function of the number-average molecular length. Methanol and ethanol mixtures show higherT _g values than indicated by this relation. These results are found to be consistent with association of the heavier alkanols into chains of very great length in the supercooled liquid, while ethanol and methanol must form networks with a moderate degree of crosslinking between chains.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

Dipolar relaxations in an epoxy-amine system

Dipolar relaxations in a reactive epoxy-amine system based on diglycidyl ether of bisphenol A with 4,4^′-diaminodiphenylsulfone were studied with the Havriliak-Negami function. The system was cured isothermally at 140 °C using simultaneous kinetic and microdielectric studies.The relaxation time was calculated from the frequency f_max of the peak of the loss factor ε^′′ versus frequency f. A linear relation exists between the logarithm of the relaxation time τ and the glass transition temperature T_g. Then, logτ follows the Di Benedetto equation revisited by Pascault and Williams allowing the prediction of the relaxation time τ during cure.The unrelaxed permittivity at high frequency ε_u, the relaxed or static permittivity ε_s and the skewness parameter β were found independent on the conversion or the curing time. The distribution parameter α decreases as curing time t increases. The difficulty of orientation of dipoles in the electric field due to vitrification is responsible of these behaviours.     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.