Temperature programmed reduction of silica supported nickel catalysts

Nickel oxide promoted catalysts are prepared by simple precipitation, precipitation from homogeneous solution and impregnation methods and their reduction behavior is monitored with temperature programmed reduction (TPR) technique. The effect of different parameters such as metal loading, method of preparation and heat treatment temperature are also observed on the reducibility of the catalysts. It is observed that reduction temperature increases with the increase of calcination temperature. Results indicate that the interactions between nickel oxide and silica begin with the increase of calcination temperature which leads to the formation of nickel hydrosilicates and are responsible for high temperature reduction peaks.     

掺杂稀土元素对细晶BaTiO_3系统耐压及介电性能的影响

研究了稀土元素Ho2O3和Er2O3掺杂BaTiO3基瓷料,其在BaTiO3系晶粒中可抑制晶粒生长,使晶粒尺寸变小,体密度增高,呈现细晶效应,ε峰在整个温区范围内弥散,提高室温下介电常数,减小容量变化率。本系统中三价稀土氧化物Ho2O3和Er2O3等物质同时加入到BaTiO3陶瓷中后,稀土氧化物没有全部进入晶格内部发生取代,其中的一部分与其他添加剂形成一些非铁电相,提高耐压;另一部分留在晶界处,成为晶粒抑制剂,使得晶粒细小,瓷体致密,提高陶瓷的耐压。     

Inclusion complexes of the natural product gossypol. Recognition by gossypol of halogeno methanes. Structure of the dichloromethane complex of gossypol and single crystal conservation after decomposition

The structures of gossypol complexes are extremely sensitive to the halogenomethane present as the guest; e.g. changing the number of Cl atoms in chloromethane derivatives changes the structure of the gossypol complex. The crystals of C₃₀H₃₀O₈·CH₂Cl₂ are monoclinic, space groupC2/c,a=21.320(4),b=19.199(6),c=15.765(2)Å, =113.05(2)^o,V=5916(2)ų,Z=8,D _x=1.35 g/cm³,T=295 K. The structure has been solved by direct methods and refined to the finalR value of 0.084 for 1828 reflections. In the structure H-bonded gossypol molecules form columns, generating channels in the structure which are filled by guest molecules. After decomposition (desolvation) monocrystals of the complexes are conserved without destruction, in which there are rather wide and empty channels though slightly smaller than in the complex. An attempt is made to explain some peculiarities of the behavior of the gossypol polymorph formed on the basis of its structure with empty channels. Supplementary data relevant to this article have been deposited with the British Library Publication No. SUP 82165 (17 pages).     

Siloxane-Based Nanobuilding Blocks by Reaction Between Silanediol and Trifunctional Silicon Alkoxides

The preparation of nanostructured organic-inorganic materials by assembling of nanobuilding blocks allows controlling the extent of phase interaction, which in its turn governs structure-properties relationships. We present here the synthesis of siloxane-based nanobuilding blocks prepared by reacting diphenylsilanediol with vinyltriethoxysilane and triethoxysilane. The reaction products were obtained by non-hydrolytic condensation between silanediol and ethoxide groups in inert atmosphere, in the presence of pyridine, triethylamine or butyl lithium. Different synthetic conditions were examined by means of ATR-FTIR and NMR spectroscopies, showing the formation of siloxane bonds. In the case of triethoxysilane the reaction carried out in the presence of pyridine leads to Si–H bond preservation in the final product. Air stable products with improved Si–O–Si hydrolytic stability can be obtained by removal of the base after the reaction completion. The condensation products can be described as a mixture of siloxane rings involving difunctional and trifunctional silicon units.     

Direct analysis of fly ash materials by inductively coupled plasma atomic emission spectrometry using slurry nebulization

Fly ash samples of cement works were analysed using slurry nebulization inductively coupled plasma atomic emission spectrometric (ICP-AES). Because of the influence of the experimental factors on the signal intensity, the optimal conditions of the analysis circumstances were determined. Control analyses (wet digestion followed by ICP-AES, and XRF of dry powders (pressed pellets)) were also carried out to compare the results. Based on the result, it was concluded that the slurry nebulization method using slurry standard of same type reference material for calibration can be applied for rapid but less precise (RSD 5–10%) determination of the elements in fly ash.     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).     

Single-Molecule single crystals of isotactic polystyrene

Single-molecule single crystals were grown from amorphous droplets of fractionated isotactic polystyrene. The crystals were analyzed by electron microscopy and electron diffraction. The molecular mass distribution could be matched with a statistical analysis of single-molecule particles (amorphous and crystals). Proof was brought that single molecules of isotactic polystyrene do not reach equilibrium dimensions on crystallization, rather assume the lamellar morphology with chain-folded macroconformation, also known from crystallization of polymolecular crystals. © 1994 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America. US Government contract No. DE-AC05-840R-21400.

     

单分散纳米InVO4(正交相)的低温合成

InVO₄ is a new developed visible light responding photocatalyst for water decomposition, which is obtained by a solid-state reaction at high temperature traditionally. In this paper, pure InVO₄ nano-crystalline powder has been prepared by a hydrothermal process at low temperature and was characterized by TEM, IR, and X-ray diffraction. Many factors such as pH value, reaction time and temperature have been investigated. It is found that the optimal conditions for the preparation is: n_InCl3∶n_NaVO3=1∶2; temperature : 150 ℃; Reaction time: 4～8 h; pH=7.9～8.0. And the experimental result shows that it is a convenient way to get single dispersing InVO₄ nano-crystalline powder by flux in alkyl alcohol.     

La2O3,Y2O3-Mo次级发射材料研究

采用粉末冶金方法制备了La2O3，Y2O3-Mo次级发射材料，测试了各种材料的次级发射系数。结果表明在钼中加入稀土氧化物可以具有很好的次级发射性能。经过激活处理后，材料的最大次级发射系数均高于2．0，达到了材料使用要求的发射水平。应用扫描电镜(SEM)和光电能谱仪(XPS)研究了稀土元素在烧结体断口和发射前后在试样表面的分布情况。分析结果表明稀土元素易于在晶界处偏聚，且发射后试样表面稀土元素的相对浓度明显高于发射前的浓度。