十字结构银纳米线的表面等离极化激元分束特性

金属纳米线波导可以将光局域在亚波长尺度内传播, 在纳米光子集成回路方面有着重要的作用. 本文应用有限元方法, 研究了十字结构银纳米线的表面等离极化激元分束特性. 结果表明, 不同模式的表面等离极化激元在十字结构三个分支的输出依赖于端面的几何结构参数. 此外, 研究还发现由于不同模式表面等离极化激元叠加, 在十字结构的分支上出现了周期性电场分布.     

银纳米颗粒/多孔硅复合材料的制备与气敏性能研究

采用双槽电化学腐蚀法以电阻率为10-15 Ω·cm的p型<100>晶向的单晶硅片制备了孔径约为1.5 μm, 孔深约为15-20 μm的p型多孔硅, 并以此多孔硅作为基底采用无电沉积法通过调控沉积时间在其表面沉积了不同厚度的银纳米颗粒薄膜. 采用扫描电子显微镜和X 射线衍射仪表征了银纳米颗粒/多孔硅复合材料的形貌和微观结构, 结果表明银纳米颗粒较均匀的分布于多孔硅的表面上且沉积时间对产物的形貌有重要影响. 采用静态配气法在室温下研究了银纳米颗粒/多孔硅复合材料对NH₃的气敏性能. 气敏测试结果表明沉积时间对产物的气敏性能影响较大. 当沉积时间较短时, 适量银纳米颗粒掺杂的多孔硅复合材料由于其较高的比表面积以及特殊的形貌和结构, 对NH₃气体表现出较高的灵敏度、优良的响应/恢复性能. 室温下, 其对50 ppm 的NH₃气体的气敏灵敏度可以达到5.8左右.     

Polymer-Nanoparticle Composites Composed of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Coated Silver Nanoparticles

The effects of addition of synthesized organic-suspension silver nanoparticles on the crystallization and thermal stability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD), UV-Vis absorption spectroscopy, polarized optical microscopy (POM), and thermal gravimetric analysis (TGA). The TEM images showed the average primary size of the as-synthesized silver nanoparticles, coated with a monolayer of the surfactants consisting of oleic acid and an alkylamine, was about 5 nm with narrow distribution, and that they were uniformly dispersed in n-heptane. PHBV/silver nanocomposites were prepared by melt mixing in an internal mixer and then injection molded into rectangle-shaped specimens by a labscale injection molding device. The coated silver nanoparticles showed a homogenuous dispersion in the PHBV matrix when the content of coated silver nanoparticles was about 1%. Both the DSC and POM data showed the efficient heterogeneous nucleation by the coated silver nanoparticles for facilitating PHBV crystallization. The thermal stability of the PHBV/silver nanocomposites improved with the increase in the content of the coated silver nanoparticles.     

New Silver Halide Sensitized Gelatin Material: Its Processing

ＮｅｗＳｉｌｖｅｒＨａｌｉｄｅＳｅｎｓｉｔｉｚｅｄＧｅｌａｔｉｎＭａｔｅｒｉａｌ：ＩｔｓＰｒｏｃｅｓｉｎｇＰＡＮＧＬｉｎ１ＧＵＯＬｕｒｏｎｇ１ＺＨＡＮＧＷｅｉｐｉｎｇ２ＴＡＮＧＪｉｙｕｅ１ＷＡＮＧＫｅｔａｉ１（１ＩｎｆｏｒｍａｔｉｏｎＯｐｔｉｃｓＩ...     

Al纳米线不同晶向力学行为和变形机制的模拟

采用分子动力学模拟计算方法,考察具有较高层错能的Al纳米线沿不同晶向的力学行为和变形机制。在相同计算条件下与具有较低层错能的Ni、Cu、Au和Ag等FCC金属纳米线进行比较。结果表明：在力学行为方面,Al纳米线的弹性模量呈现明显的结构各向异性,满足E_[111] > E_[110] > E_[100]的关系,这一关系在FCC金属纳米线中普遍成立;Al纳米线的屈服应力随晶向呈现σ_y[100] > σ_y[111] > σ_y[110]的关系,这一关系在具有较低层错能的FCC金属纳米线中不具有普遍性,这与体系中位错形成机制密切相关。根据拉伸变形过程微观结构的演变规律,阐明Al纳米线不同晶向的变形机制,并与具有较低层错能的Ni、Cu、Au和Ag等FCC金属纳米线的变形机制进行比较。结果表明,对于尺度较小的高层错能Al纳米线,Schmid因子和广义层错能均难以准确预测其变形机制。     

青霉胺稳定的铜/银双金属纳米簇制备及其在银离子检测中的应用EI北大核心CSCD

以青霉胺(DPA)为还原剂和稳定剂,通过一锅法一步制备了青霉胺稳定的铜/银双金属纳米簇(DPA-Cu/Ag NCs),并将其作为一种传感器用于检测水样中的银离子。该银离子传感器具有价格低廉、分析速度快速、选择性高等特点。采用透射电子显微镜(TEM)等方法表征了DPA-Cu/Ag NCs的结构及其化学组成,并通过荧光光谱和紫外-可见光谱法研究了DPA-Cu/Ag NCs的光学性质。结果表明,该DPA-Cu/Ag NCs在激发波长为300 nm时的最大发射波长为555 nm,其溶液在可见光照射下呈现乳白色,在紫外灯照射下则呈现出明亮的黄色荧光。在DPA-Cu/Ag NCs的制备条件达到最优化的情况下,可以将其作为探针,用来高选择性、高灵敏性地检测银离子。该探针检测银离子的检测限为0.3μmol/L,线性范围为0~500μmol/L。该DPA-Cu/Ag NCs探针还可应用于自然环境水样(湖水、瓶装矿泉水和实验室自来水)中银离子浓度的检测,其检测性能十分优异且具有良好的准确度和重现性,表明DPA-Cu/Ag NCs探针在环境检测方面有非常高的应用价值。     

Glass‐embedded silver nanoparticle patterns by masked ion‐exchange process for surface‐enhanced Raman scattering

Glass‐embedded silver nanoparticle patterns were fabricated by masked silver–sodium ion‐exchange process followed by etching to reveal the particles for surface‐enhanced Raman scattering (SERS). The intensity of the enhanced Raman signal is comparable to that of the fluorescence, and the detection limit of 1 nM for Rhodamine 6G has been achieved. Raman images at different etching depths and corresponding morphological images are compared to find optimal SERS signal. Our results demonstrate that silver nanoparticle patterns embedded in glass can be used as SERS‐active substrates. Nanoparticles can be formed in a glass of high optical quality and have potential to be integrated with optical waveguides for a sensor chip. Copyright © 2010 John Wiley & Sons, Ltd.     

Poly(vinylpyrrolidone)‐stabilized silver nanoparticles for strained‐silicon surface enhanced Raman spectroscopy

Poly(vinylpyrrolidone)‐stabilized silver nanoparticles deposited onto strained‐silicon layers grown on graded Si_1−xGe_x virtual substrates are utilized for selective amplification of the Si–Si vibration mode of strained silicon via surface‐enhanced Raman scattering spectroscopy. This solution‐based technique allows rapid, highly sensitive and accurate characterization of strained silicon whose Raman signal would usually be overshadowed by the underlying bulk SiGe Raman spectra. The analysis was performed on strained silicon samples of thickness 9, 17.5 and 42 nm using a 488 nm Ar⁺ micro‐Raman excitation source. The quantitative determination of strained‐silicon enhancement factors was also made. Copyright © 2011 John Wiley & Sons, Ltd.     

Theoretical study of photon emission from single quantum dot emitter coupled to surface plasmons

Motivated by the recent pioneering advances on nanoscale plasmonics and also nanophotonics technology based on the surface plasmons (SPs), in this work, we give a master equation model in the Lindblad form and investigate the quantum optical properties of single quantum dot (QD) emitter coupled to the SPs of a metallic nanowire. Our main results demonstrate the QD luminescence results of photon emission show three distinctive regimes depending on the distance between QD and metallic nanowire, which elucidates a crossover passing from being metallic dissipative for much smaller emitter-nanowire distances to surface plasmon (SP) emission for larger separations at the vicinity of plasmonic metallic nanowire. Besides, our results also indicate that, for both the resonant case and the detuning case, through measuring QD emitter luminescence spectra and second-order correlation functions, the information about the QD emitter coupling to the SPs of the dissipative metallic nanowire can be extracted. This theoretical study will serve as an introduction to understanding the nanoplasmonic imaging spectroscopy and pave a new way to realize the quantum information devices.     

KB scanning of X‐ray beam for Laue microdiffraction on accelero‐phobic samples: application to in situ mechanically loaded nanowires

A mapping technique has been developed where a sub‐micrometer focused polychromatic X‐ray beam is scanned across a stationary sample instead of scanning the sample in front of the X‐ray microbeam. This method is applied to a gold nanowire during its mechanical loading using the tip of an atomic force microscope. During the loading process, such a sample is `accelero‐phobic', i.e. the sample scanning stages must not to be moved to avoid parasitic additional load. Without beam scanning, only one single position within the sample can be probed during the test. The probed material point may even change because of drifts or movements induced by the test itself. The new scanning approach facilitates the in situ mapping of the entire wire giving access to the evolution of the wire shape as well as to the boundary conditions. This novel scanning technique opens promising perspectives for studies where sample motion is forbidden because of the sample environment.