A study of the transition of liquid-crystal alignment from homeotropic to planar on a polyimide layer

The alignment of nematic liquid crystals by rubbed polyimide surfaces has been well-studied and developed. A novel polyimide film which induced a homeotropic alignment of the nematic liquid crystal without rubbing or with weak rubbing strength was presented. However, there was a transition from homeotropic to planar alignment of the nematic liquid crystal after strong rubbing. In order to study the transition, the polyimide surface was investigated by atomic force microscopy, surface free energy measurement and angle-resolved analysis X-ray photo-electron spectroscopy before and after rubbing with a velvet fabric. It was found that both the change of surface polarity and surface morphology were not the reasons for the transition. The droop of the side chain on the polyimide surface after the rubbing treatment was detected by angle-resolved analysis X-ray photo-electron spectroscopy. Owing to the special structure of the novel polyimide, the X-ray photo-electron spectroscopy was successfully used for the first time to analyse the conformational change of the side chain of a polymer. In conclusion, the transition of nematic liquid crystal alignment from homeotropic to planar after rubbing was influenced by the side chain conformation of the polyimide.     

Phase modulation and ellipticity of the light transmitted through a smectic C* layer with short helix pitch

A chiral ferroelectric smectic C* liquid crystal (FLC) with the helix pitch p ₀?=?330 nm was developed to avoid any scattering of visible light when the helix is not unwound over a certain limit. Planar cells with different FLC layer thickness (16 and 44 μm) have been assembled with helix axis parallel to the glass plates and aligned along the rubbing direction. The ellipticity of the light passing through the cells vs. the electric field was investigated, and a method for evaluating the electrically controlled birefringence via ellipticity measurements has been established. We have found that the FLC cell is an optical retardation layer driven by the electric field, the effective birefringence being proportional to the square electric field. The physical origin of the electrically controlled phase shift of the light passing through the FLC layer has been analysed.     

Spontaneous formation of liquid crystalline phases and phase transitions in highly concentrated plasmid DNA

The liquid crystalline (LC) properties of two supercoiled plasmid DNA samples, pBSK (2958 bp) and pGEM (3000 bp), have been studied using polarised light microscopy (PLM), circular dichroism (CD) and UV–Vis spectroscopy. The influence of methods of isolation on plasmid LC behaviour is described, and using PLM we have demonstrated the spontaneous formation of cholesteric fingerprint-like textures. Preliminary studies of LC phase transitions in pGEM show the irreversibility of LC phase formation, as a consequence of changes in the tertiary structure of supercoiled plasmids. Using UV–Vis spectroscopy a hyperchromic effect was observed with increasing temperature. The CD spectra clearly showed structural changes, and probably mismatching of DNA bases, during cooling. Finally, we have observed an irreversible phase transition in plasmid DNA which is very different from that previously reported in linear DNA.     

Photoluminescence of a 5CB liquid crystal–organomontmorillonite nanoparticle heterocomposite

Photoluminescence (PL) of a heterocomposite, consisting of the nematic liquid crystal (LC) 4-pentyl-4´-cyanobiphenyl (5CB) and anisometric nanoparticles of montmorillonite (MMT) clay, modified by cetyltrimethylammonium bromide (CTAB) has been investigated at 4.2 and 300 K. The incorporation of this organoclay (B4) to 5CB decreases the emission intensity by 7–8 times due to efficient resonant quenching of the exciting energy by the organoclay. The spectrum shifts to a long-wave region, with this effect being considerably larger at low temperatures. Graphical separation of complex bands, corresponding to the bulk 5CB and 5СВ?+?В4 heterosystem at both temperatures revealed that the presence of the organoclay resulted in a significant growth of LC dimer quantity, shifting spectra towards longer wavelengths. Changes in the 5CB luminescence under organoclay influence can be explained by quite strong interphase interactions specified earlier by infrared spectroscopy between the MMT surface and LC, and by a realisation of more flat conformations of 5CB molecules. Confinement effects prevent full crystallisation of 5CB in the 5CB?+?B4 composite, and LC dimer structures located in the organoclay near-surface layers on the outer surface of the nanoparticles and inside its galleries remain in a larger amount, at low temperature, when compared to bulk 5CB. The remaining LC crystallises and photoluminescence from the 5CB monomers becomes intense.     

Tunable negative index metamaterial employing in-plane switching mode at terahertz frequencies

We analysed the response of a tunable liquid crystal metamaterial transducer in the terahertz frequency range. Tunability of scattering parameters is achieving by an in-plane switching (IPS) effect. The metamaterial structure is based on Ω-shape resonators. A full-wave analysis technique based on the finite-difference time-domain (FDTD) method was performed using the QuickWave 3D electromagnetic solver. Terahertz transmission properties of the metamaterial structure can be controlled by the director of the liquid crystal layer. The effective refractive index for operation frequency varies from negative to positive values. A novel approach to switching of metamaterial transducer by IPS mode is presented.     

Self-assembled discotic nematic liquid crystals formed by simple hydrogen bonding between phenol and pyridine moieties

New discotic nematic liquid crystals have been prepared through intermolecular hydrogen bonding between the core of 1,3,5-trihydroxybenzene (phloroglucinol, PG) or 1,3,5-tris(4-hydroxyphenyl)benzene (THPB) and the peripheral molecules of stilbazole derivatives. The various nematic phases formed by new hydrogen bonding building blocks were investigated by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. The first discotic complexes of PG and trans-4-alkoxy-4′-stilbazoles exhibited nematic columnar (N_C) and hexagonal columnar phases depending on the length of alkyl chains, which were considered as the basic discotic structure. Several structural variations on the building blocks were attempted to examine their effects on the liquid crystalline properties of discotic complexes. The nematic lateral phase (N_L) with enhanced intercolumnar order was observed for the complexes of PG and trans-4-cyanoalkoxy-4′ stilbazoles due probably to the strong dipole interactions between cyano groups at the end of alkoxy chains. By introducing the nonlinear structure in three arms of supramolecular discotic mesogen, a discotic nematic phase (N_D) was observed for the complex of THPB and trans-4-octyloxy-4 -stilbazole. The single hydrogen bonding between phenol and pyridine moieties in this study provides a simple and effective method for preparing the rarely found discotic nematic liquid crystals.     

Enhanced dielectric and electro-optical properties of a newly synthesised ferroelectric liquid crystal material by doping gold nanoparticle-decorated multiwalled carbon nanotubes

In this article, a newly synthesised ferroelectric liquid crystal (FLC) material, namely LAHS 22, has been characterised. The characterisation of the FLC material has been performed using dielectric relaxation spectroscopy, differential scanning calorimetry and polarisation optical microscopy. We observed an enhancement in the dielectric and electro-optical properties of the FLC material by incorporating gold nanoparticles (GNPs)-decorated multiwalled carbon nanotubes (MWCNTs). The GNPs-decorated MWCNTs cause an increment in dielectric dispersion (up to kHz), absorption, spontaneous polarisation and rotational viscosity of the FLC material. The pure and GNPs-decorated MWCNTs doped FLC cells were analysed by means of various dielectric spectroscopic and optical measurements. The observed enhancement in the dielectric and electro-optical properties of the FLC material has also been studied with concentration of GNPs-decorated MWCNTs in FLC material. The GNPs-decorated MWCNTs/FLC composites are not only of fundamental importance, but also useful materials for device applications such as liquid crystal displays and memory devices.     

Effects on molecular orientation and phase transition of addition of carbon nanotubes into liquid crystalline matrix

For practical guest–host applications, it is important to choose dyes with a high ability of orientation in the liquid crystal (LC) matrix. In this experimental work, two different azo-structured dyes (disperse yellow 3 and 7) were separately doped to each of two different nematic LCs (E7 and ZLI-1132). Their solubilities, textures, phase transition temperatures and order parameters were determined. At the second stage, single-walled carbon nanotubes (SWCNTs) in a small amount were separately added to each of these solutions, and the experiments were repeated as similar to the previous ones. The solubilities of dyes in the LC E7 were lower than those of ZLI-1132. Moreover, the highest order parameter value was attained with yellow 7 dye in ZLI-1132 nematic host. Co-use of nanoparticles (CNTs) as dopant resulted in notable increases in order parameters. These dyes and CNTs did not significantly destabilise the mesomorphic phase of nematic hosts. An appreciable change in textures was not monitored with addition of dopant(s). In addition, it was observed that the narrowing on the temperature range of the LC did not take place with the addition of dopants to the crystal; on the contrary, an increase was recorded.