Vibrational EELS and DFT study of propionic acid and pyruvic acid on Ni(1 0 0): Effects of keto group substitution on room-temperature adsorption and thermal chemistry

The room-temperature adsorption and thermally induced processes of propionic acid and pyruvic acid on Ni(1 0 0) have been investigated by electron energy loss spectroscopy (EELS). Computational vibrational analysis of the optimized bidentate structures for acid-Ni model complexes (involving the organic acid and a Ni atom) has been performed by using the two-layer ONIOM method with the Density Functional Theory and used to interpret the vibrational EELS data. Dehydrogenation of the hydroxyl group is found to result in bonding of the carboxylate group in the propionate and pyruvate adspecies to either a single Ni surface atom in a bidentate configuration or two neighbouring Ni atoms in a bridge configuration. Given the similarities in the total energies and related vibrational frequencies obtained by the calculations in the case of pyruvate adspecies, it is difficult to differentiate the alternate adsorption structure, in which the keto O and hydroxyl O atoms are bonded to a Ni atom in a five-member chelate ring configuration. Furthermore, temperature-dependent EELS studies show that both the propionate and pyruvate adspecies could decompose upon annealing to above 400 K and further dissociate to CO adspecies above 550 K and to C and/or O above 600 K.     

Ag纳米颗粒的光吸收和透射电镜研究

用硼氢化钠作还原剂,制备出两种相对稳定的含银纳米颗粒的水溶胶,用透射电镜（TEM）和光学吸收谱对这些颗粒进行了表征.当被还原的银离子较少时,所形成的银纳米颗粒较小,吸收峰呈现二极等离子体共振吸收峰.当被还原的银离子较多时,银纳米颗粒尺寸变大,并出现二极和四极共振吸收峰.在Ag纳米颗粒形成后,对其溶液稀释,发现其峰形保持不变,而峰位会出现红移,最大红移量可达到10 nm.透射电镜研究表明,低浓度溶胶中的Ag纳米颗粒尺寸较为均匀,平均直径12 nm.高浓度溶胶中的纳米颗粒尺寸呈双尺寸分布特点,少量颗粒直径小于14 nm,大部分颗粒直径大于20 nm.     

催化动力学光度法测定痕量铝

痕量铝在硝酸介质中能催化加速过氧化氢和高碘酸钾与二甲苯胺兰FF之间的褪色反应。研究了反应的最佳实验条件,建立了测定痕量铝的新方法。方法检出限为6.1×10-10gAl3+/mL,检测范围为0-1.0μgAl3+/25mL。本方法具有高灵敏度,选择性较好,操作简便,快速的特点。用以测定水样中的痕量铝,获得满意结果。     

功能性丙烯酸/MBAM体系共聚产物的研制

以丙烯酸和MBAM为主要原料，经聚合，合成了一种高性能的具有良好保水性能的聚合产物，其保水量达到750～1000倍．50℃以下有良好的保水性能，28℃以下有极好的保水性能，并研究了工艺条件对该产品性能的影响因素．     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶 凝胶法以磷钼酸 (MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2 催化剂 .使用ICP、XRD、TG DTA、IR、TPD MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能 .杂多钼酸盐与TiO2 通过O2 -在TiO2 表面发生了键合 .在 6 2 3K下 ,杂多阴离子仍保持原有的Keggin结构 .CO2 在Lewis酸位Ni(Ⅱ )和Lewis碱位Ni-O -Mo的桥氧协同作用下生成CO2 卧式吸附态Ni(Ⅱ )←O - (CO)← (O--Ni) .丙烯有多种吸附态在催化剂上吸附 .在 5 6 3K、1MPa和空速 15 0 0h-1的反应条件下 ,丙烯的摩尔转化率为 3.2 % ,产物MAA选择性为 95 % .     

Preparation of Phosphoric-Carboxylic Cation Exchangers from Wood Cellulose

Phosphorus-containing cellulose cation exchangers were synthesized by reaction of wood cellulose with orthophosphoric acid and the ternary polymer from glycidylmethacrylate, styrene, and maleic anhydride. The effects of the ratio of reactants, temperature, and duration of the reaction on the phosphorylation and exchange capacity of the modified cellulose material were studied.     

Synthesis of β-phenyl-δ,ε-unsaturated amino acids and stereoselective introduction of side chain groups into [4,3,0]-bicyclic β-turn dipeptides

(2S,3S)- and (2R,3R)-2-amino-3-phenyl-5-hexenoic acids have been synthesized in large scale by using Ni(II)-complexes as a template. The amino acids were used in the synthesis of [4,3,0]-bicyclic β-turn mimetics by a convergent methodology. The unique advantage of this strategy is the convenience of introducing side chain groups with predetermined chiralities on both the five- and six-membered heterocyclic rings.     

An Improved Synthesis of Retinoic Acid from β-Ionone

A convenient and large-scale preparation of retinoic acid 1 from β-ionone in five steps with 38% overall yield is described.The key steps are the epoxidization of 2 with a new methylated agent and the condensation 4 with tetraethyl methylenediphophonate in one-pot procedure to prepare 6.