基于自衍射效应的自参考光谱干涉方法的研究

研究一种基于非线性透明光学介质中的自衍射和自参考光谱干涉的新方法来进行飞秒激光脉冲测量. 实验中, 基于此新方法设计一种简单装置, 对800 nm 中心波长, 约40 fs 近无啁啾飞秒激光脉冲进行测量, 并与自参考光谱相干电场重建法测量结果进行比较, 得到了一致的结果. 此新方法与相应的装置结构简单, 可以对深紫外到中红外光谱范围的飞秒脉冲进行测量. 关键词： 飞秒激光脉冲 自参考光谱干涉 自衍射 脉冲测量     

基于脉冲石英增强光声光谱的中红外超高灵敏CO探测

发展了一种超高灵敏的CO痕量气体测量装置,该装置采用4.65μm脉冲式中红外外腔量子级联激光器作为激发光源,结合石英增强光声光谱技术,对2135~2225cm-1之间的CO基频振动光谱带R支进行连续光谱扫描。水被加入到被测气体中,以加快较慢的CO分子振动-平动弛豫率。在锁相放大器时间常数为3ms,激光器占空比和扫描速率为50%和18cm-1/s时,获得的最小探测极限为4.6×10-8(体积分数),与之对应的归一化噪声等效吸收系数为1.07×10-8 cm-1 W/Hz。     

Nonlinear polarization rotation-induced pulse shaping in a stretched-pulse ytterbium-doped fiber laser

We report on controllable pulse shaping in a Yb-doped stretched-pulse fiber laser followed by a high-power chirped pulse amplifier. We demonstrate that the pulses after an extra-cavity grating pair change their intensity profile from Lorentz to Gaussian and then to sech2 shapes by adjusting the intra-cavity polarization through a quarter-wave plate inside the fiber laser cavity. The laser pulses with different pulse shapes exhibit pulse-to-pulse amplitude fluctuation of -- 1.02%, while the sech2-shaped pulse train is provided with a more stable free-running repetition rate as a result of the stronger self-phase modulation in the fiber laser cavity than Lorentz- and Gaussian-shaped pulse trains.     

理论研究电流注入对垂直腔面发射激光器多横模行为的影响

从包含时空变量的速率方程出发,针对弱折射率导引垂直腔面发射激光器(VCSELs),利用空间积分法分析了典型电注入参数对VCSELs多横模行为的影响,在不降低模型准确性的前提下提高了仿真效率。仿真结果表明,注入盘孔径和注入环越小、注入强度越低以及电流扩散越弱时,VCSELs更易实现单横模工作;反之,VCSELs高阶横模开始出现并呈现较强的模式竞争,引发了载流子空间烧孔效应,并导致基模强度降低。进一步得出,在环形注入方式下,高阶模式更容易出现且彼此间的竞争较盘形注入时强。     

微型同轴脉管制冷机最低制冷温度影响因素的实验研究

本文对微型同轴脉管制冷机最低制冷温度的影响因素进行了实验研究。试验结果表明:在其他运行参数不变的情况下,随着氢浓度的逐渐减少,最低制冷温度也逐渐降低,当氢的摩尔浓度小于20％时,其最低制冷温度和纯氦相差不大。不同的氢氦配比下,该脉管制冷机的最佳运转频率为16.7 Hz。随着系统平均压力的提高,最低制冷温度也随之下降,但变化幅度越来越小。     

Intracavity phase interferometry: frequency combs sensor inside a laser cavity

In traditional interferometric measurements, a physical quantity that changes the phase of a resonator is monitored through a change of its transmission. Interferometry inside a laser exploits the ultimate Q‐factor of that resonator, and converts the phase to be measured into a frequency. A mode‐locked laser with two intracavity pulses emits two frequency combs of the same repetition rate. The quantity to be measured (a sub‐nano displacement, a nonlinear index, an acceleration or rotation, a magnetic or electric field) produces a minute phase change ( rad) in one of the two intracavity pulses, which is converted into a frequency, measured by beating the two pulse trains emitted by the laser. This paper presents methods of operating mode‐locked lasers in which two independent pulses circulate, producing two frequency combs of the same repetition rate. Various examples of physical quantities that can be measured through this technique are presented.     

光子计数技术及其在弱光计量中的应用

从光子计数原理出发,介绍光子计数系统的构成,分析光电倍增管的脉冲幅度分布,并叙述光子计数技术在弱光计量中的实际应用。     

Amplified low-repetition-rate fs pulsewidth measuring and DLA caused pulse broadening

Amplified low-repetition-rate fs pulse is generated with dye laser amplifier(DLA). The pulsewidth is measured with a computer-aided autocorrelator and the fs pulsewidth broadening caused by the dispersion of the DLA is analyzed. Furthermore, the autocorrelator introduced in this paper could be used as a low scanning autocorrelator to measure high-repetition-rate pulsewidth.     

Non-contact optical fibre phased array generation of ultrasound for non-destructive evaluation of materials and processes

The use of non-contact laser techniques for the generation of ultrasound has extended the limits of the application of traditional ultrasonic techniques. This paper focusses on the use of one such non-contact laser technique, known as ‘optical fibre array’, to generate shear and surface waves. The shear wave experimental directivity pattern results are presented and compared with the theoretical results of a single source and an array source. The experimental directivity results for the surface wave are also presented, and compared with the theoretical results. The data show that the array enhances signal generation in the forward direction for both shear and surface waves. The array gain is also discussed. The receiver for the directivity measurements was a contact piezoelectric transducer.