Synthesis and Investigation of Soluble Polymer-supported Dendrimers

Poly（ethylene glycol） （PEG）-supported dendrimers have been synthesized using 2.4,6-trichloro-1,3,5-triazine （TCT） as dendrons and tris（hydroxymethyl）aminomethane as tinkers with high loading capacity, excellent solubility and thermal stability by divergent method. The new synthesized PEG-supported G2.0 dendrimer has 10 times as large functional group loading capacity as commercial PEG3400 with overall yield 44.0%.     

Photocatalytic Organic Syntheses: Selective Cyclization of Amino Acids in Aqueous Suspensions

Photocatalytic reactions occurring at semiconductor particles/solution interfaces can be applied to organic syntheses. In this review article, examples of photocatalytic syntheses of cyclic amino acids by suspended semiconductor particles, e.g., titanium(IV) oxide or cadmium(II) sulfide are introduced and interpreted. Different from the photocatalytic decomposition of pollutants under aerobic conditions, selective conversion of organic compounds can be driven by the photocatalytic reactions under deaerated conditions.     

碳纳米管添加剂对质子交换膜燃料电池低铂载量膜电极性能的影响研究

以碳纳米管（CNT）作为低铂载量膜电极（CCM）催化层（0.1 mg_Pt·cm^-2）添加剂，研究了CNT的添加方式对催化层微观结构以及膜电极性能的影响.结果表明，与常规低铂载量催化层相比，在其表面喷涂一层CNT或将CNT均匀分散到Pt/C催化层中均有利于提升低铂载量膜电极的输出性能，在70℃和100%相对湿度条件下最高输出功率比常规低铂载量膜电极的0.522 W·cm^-2分别提升了22.4%和60.0%，并且均匀分散添加方式优于分层添加方式.其原因在于分层添加CNT后改善了低铂催化层和气体扩散层之间的接触界面，降低了催化层与扩散层间的接触电阻，而均匀分散添加方式除了可降低界面接触电阻外，还显著改善了低铂催化层中的气体传输，大幅提升了Pt催化剂的利用效率，使得膜电极电化学反应电阻明显降低.进一步对均匀分散添加方式中CNT的载量进行优化，表明CNT添加量为37.5 μg·cm^-2时电池输出性能最佳，70℃和100%相对湿度条件下的最大输出功率达到0.91 W·cm^-2.本研究工作表明，将CNT均匀分散添加到催化层中是一种有效提升低铂载量膜电极性能的方法.     

Study of reactive ion etching of Si and SiO2 for CFxCl4−x gases

A parametric study of the etching of Si and SiO₂ by reactive ion etching (RIE) was carried out to gain a better understanding of the etching mechanisms. The following fluorocarbons (FCs) were used in order to study the effect of the F-to-Cl atom ratio in the parent molecule to the plasma and the etching properties: CF₄, CF₃Cl, CF₂Cl₂, and CFCl₃ (FC-14, FC-13, FC-12, and FC-11 respectively). The Si etch rate uniformity across the wafer as a function of the temperature of the wafer and the Si load, the optical emission as a function of the temperature of the load, the etch rate of SiO₂ as a function of the sheath voltage, and the mass spectra for each of the FCs were measured. The temperature of the wafer and that of the surrounding Si load strongly influence the etch rate of Si, the uniformity of etching, and the optical emission of F, Cl, and CF₂. The activation energy for the etching reaction of Si during CF₄ RIE was measured. The etch rate of Si depends more strongly on the gas composition than on the sheath voltage; it seems to be dominated by ion-assisted chemical etching. The etching of photoresist shifted from chemical etching to ion-assisted chemical etching as a function of the F-to-Cl ratio and the sheath voltage. The etch rate of SiO₂ depended more strongly on the sheath voltage than on the F-to-Cl ratio.     

冲击压缩下玻璃等脆性材料中失效波的研究进展

失效波的研究始于Rasorenov和Kanel发现K1 9玻璃样品后自由表面速度时程曲线上有反常再压缩信号。失效波是二十世纪九十年代冲击动力学研究领域的一个重要发现 ,它是指在一维平面应变冲击压缩下 ,在玻璃等脆性材料中由冲击波引起的一种独特的失效或破坏现象。较为系统地回顾近年来对失效波的研究工作 ,评述了研究现状、最新结果、发展趋势、研究方法和实验手段 ,对尚存的问题进行了分析讨论 ,并介绍了玻璃材料的基本特性。最后简单汇报了作者在这方面的研究工作和取得的阶段性结果。     

A dissipation‐free numerical method to solve one‐dimensional hyperbolic flow equations

In this paper, a numerical method to capture the shock wave propagation in 1‐dimensional fluid flow problems with 0 numerical dissipation is presented. Instead of using a traditional discrete grid, the new numerical method is built on a range‐discrete grid, which is obtained by a direct subdivision of values around the shock area. The range discrete grid consists of 2 types: continuous points and shock points. Numerical solution is achieved by tracking characteristics and shocks for the movements of continuous and shock points, respectively. Shocks can be generated or eliminated when triggering entropy conditions in a marking step. The method is conservative and total variation diminishing. We apply this new method to several examples, including solving Burgers equation for aerodynamics, Buckley‐Leverett equation for fractional flow in porous media, and the classical traffic flow. The solutions were verified against analytical solutions under simple conditions. Comparisons with several other traditional methods showed that the new method achieves a higher accuracy in capturing the shock while using much less grid number. The new method can serve as a fast tool to assess the shock wave propagation in various flow problems with good accuracy.     

Shock waves for the hyperbolic balance laws with discontinuous sources

In this paper, we are concerned with the behavior of shock waves in a 2 × 2 balance law with discontinuous source terms. We obtain the existence of a local shock wave solution of this problem and deduce that the discontinuous source terms create a weak discontinuity in this solution. Copyright © 2013 John Wiley & Sons, Ltd.     

Application of a hybrid meshless technique for natural frequencies analysis in functionally graded thick hollow cylinder subjected to suddenly thermal loading

A hybrid meshless technique based on composition of meshless local Petrov–Galerkin method (for spatial variables) and Newmark finite difference method (for time domain) is developed for natural frequencies analysis of thick cylinder made of functionally graded materials (FGMs). The FG cylinder is assumed to be under suddenly thermal loading, axisymmetric and plane strain conditions. The dynamic behaviors and time history of displacements are obtained in time domain using Green–Naghdi (GN) theory of coupled thermo-elasticity (without energy dissipation). Using fast Fourier transform (FFT) technique, the displacements are transferred to frequency domain and all natural frequencies are illustrated for various grading patterns of FGMs. The variations of mechanical properties in FG thick hollow cylinder are considered to be in nonlinear volume fraction law through radial direction. The presented hybrid meshless technique furnishes a ground to analyze the effects of various grading patterns of FGMs on natural frequencies, which are obtained employing GN coupled thermo-elasticity governing equations. Also, the frequency history and natural frequencies are illustrated for various grading patterns at several points across thickness of cylinder.     

A simplified adaptive Cartesian grid system for solving the 2D shallow water equations

This paper presents a new simplified grid system that provides local refinement and dynamic adaptation for solving the 2D shallow water equations (SWEs). Local refinement is realized by simply specifying different subdivision levels to the cells on a background uniform coarse grid that covers the computational domain. On such a non‐uniform grid, the structured property of a regular Cartesian mesh is maintained and neighbor information is determined by simple algebraic relationships, i.e. data structure becomes unnecessary. Dynamic grid adaptation is achieved by changing the subdivision level of a background cell. Therefore, grid generation and adaptation is greatly simplified and straightforward to implement. The new adaptive grid‐based SWE solver is tested by applying it to simulate three idealized test cases and promising results are obtained. The new grid system offers a simplified alternative to the existing approaches for providing adaptive mesh refinement in computational fluid dynamics. Copyright © 2011 John Wiley & Sons, Ltd.