太阳CO 4.6微米红外成像观测

太阳红外光谱中蕴含着丰富的物理信息,其中CO 4.6μm波段是具有代表性的分子谱带,其形成于温度极小区附近,对研究太阳物理具有极其重要的意义。为获得CO 4.6μm波段太阳单色像,本文建立了一套全反射太阳红外成像观测系统。该系统采用定天镜跟踪引光,通过成像反射镜将太阳成像于3~5μm波段红外相机的焦平面上,该相机采用的是国产HgCdTe焦平面阵列器件。同时,为提高信噪比,提出了一种有效计算平场提取观测目标的方法,并利用该方法获得了CO 4.6μm波段的太阳单色像。     

A Novel Preprocessing Algorithm for Three-Way HPLC Data

Orthogonal signal correction (OSC) was a data preprocessing algorithm. It ensured that the filtered information was irrelevant to concentration data while using it to filter the noise from the original data. This paper extended the OSC application range from two-way data to three-way data. Two drug data sets, Enoxacin, Norfloxacin, Ciprofloxacin and Betamethasone, cortisone acetate, prednisone acetate, showed that the application of the OSC algorithm to three-way HPLC data was feasible and needed further research.     

X-射线荧光分析散射幂函数法原理及其应用I·RhKα相干散射平方法

本文发现6~40号元素对能量为20keV的X_射线的质量吸收系数和质量相干散射系数之间呈二次幂函数关系,并据此提出了X_射线荧光定量分析校正基体效应的新方法——RhKa相干散射平方法.用国家标准物质GBW对该原理进行了验证.本法用于硅酸盐地质样品中微量元素的测定取得令人满意的结果.     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

电感耦合等离子体原子发射光谱法测定镍基单晶高温合金中Mo、W、Ta、Re、Ru时元素之间相互干扰的消除与校正的研究

称取镍基单晶高温合金0.100 0g于聚四氟乙烯烧杯中,先令其与盐酸9mL和硝酸1mL加热反应,待反应缓慢时滴加氢氟酸2mL并继续加热使样品完全溶解。加入500g·L^-1酒石酸溶液2mL,冷却至室温,在塑料容量瓶中加水定容至100.0mL。按仪器工作条件采用电感耦合等离子体原子发射光谱法测定其中5种合金元素(Mo、W、Ta、Re、Ru)的含量,选择分析谱线依次为204.598,207.911,240.063,197.312,240.272nm。结果发现:除了Re外,其余4种元素的测定中均受共存元素的光谱干扰,严重影响了测定结果的准确性。为克服其干扰,除了采用基体匹配法消除镍的基体干扰外,试验采用混合校正系数矩阵法对测定结果进行校准。通过一系列试验计算得到混合校准系数矩阵K,并应用于模拟样品的分析。结果表明:经过矩阵K的校准,所测定的5种元素的准确度显著提高,达到了消除共存元素之间光谱干扰的目的。通过精密度试验,测得上述5种元素测定值的相对标准偏差(n=11)均在1.5%以下,并通过标准加入法进行回收试验,测得5种元素的回收率为97.0%~105%。     

Preparation, characterization, and application of multistimuli-responsive microspheres with fluorescence-labeled magnetic cores and thermoresponsive shells

Novel functional microspheres with multistimuli-responsive properties have been prepared and characterized. The as-prepared microspheres respond to an external magnetic field, environmental temperature, and ultraviolet radiation. The in vitro drug-loading efficiency and drug-release behavior of these microspheres demonstrated that they could be used as drug carriers for drug controlled release. The results of in vivo distribution investigations of these microspheres showed that they exhibit a high magnetic-targeting effect, which holds promise for applications in various fields such as magnetic drug targeting and tissue labeling, among others.     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).     

Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application

In comparison to the corresponding single-component counterparts, core/shell particles are widely used due to their better physical and chemical properties. The surface properties of core/shell particles evidently play an important role in the process of application. It is easy to deduce that surface properties mostly depend on the properties of the component in the shell. Therefore, desirable materials of shell are very significant for the study of composite materials, especially in core/shell field. It is well known that polysiloxane has excellent properties, such as the water repellency, high flexibility, low surface energy, and biocompatibility. Its application, however, is limited due to poor cohesiveness and poor film-forming properties. Recently, much endeavor has been made to overcome such flaws. It is found that polyacrylate is commonly considered for its good cohesiveness and excellent film-forming property. The combination of polysiloxane and polyacrylate has been shown to be important in the composite material field, especially as core/shell particles. Unfortunately, their hydrophobicity is considerably different and thus, the core/shell particles consisting of polyacrylate (PA)/polysiloxane (PSi) are hard to prepare by general seeded emulsion polymerization, and are also scarcely available in the literature. In this study, the new core/shell PA/PSi particles with poly(butyl methacrylate) (PA) as the core and poly(3-(methacryloxypropyl)-trimethoxysilane) (PSi) as the shell were prepared by dispersion polymerization under the kinetically controlled conditions. The characterization of the particles by TEM, DSC, particle size analyzer as well as static contact angle confirmed the formation of core/shell structure. The application of core/shell (PA/PSi) particles also has been considered and discussed here.TEM micrographs of core/shell (PA/PSi) particles.