Approximate minimum-cost multicommodity flows in\tilde O(ɛ −2 KNM) timetime

We show that an ε-approximate solution of the cost-constrainedK-commodity flow problem on anN-nodeM-arc network,G can be computed by sequentially solving O(K(? ^?2+logGK) logGM log (G? ^?1 GK)) single-commodity minimum-cost flow problems on the same network. In particular, an approximate minimum-cost multicommodity flow can be computed in $\tilde O$ (G? ^?2 GKNM) running time, where the notation Õ(·) means “up to logarithmic factors”. This result improves the time bound mentioned by Grigoriadis and Khachiyan [4] by a factor ofM/N and that developed more recently by Karger and Plotkin [8] by a factor of? ^?1. We also provide a simple $\tilde O$ (NM)-time algorithm for single-commodity budget-constrained minimum-cost flows which is $\tilde O$ (? ^?3) times faster than the algorithm developed in the latter paper.     

STUDY ON THE DUCTILE DEFORMATION DOMAIN OF THE SIMPLE SHEAR IN ROCKS——TAKING BRITTLE FAULTS OF THE COVERING STRATA IN THE SOUTHERN JIANGSU AREA AS AN EXAMPLE

A study on the ductile deformation domain of the brittle fault in the shallow level ofthe crust is a new probe field for the modern structural geology. Taking the southern Jiang-su Province area as an example the orientation measurement of quartz crystals, the com-positional texture observation of three pressure sensitive minerals and the rheological param-eter determination of dislocation densities, etc. have been demonstrated and analysed basedon typical samples in the present paper. In addition, their generation mechanisms arealso discussed from the cataclastic rheology, the dynamic differentiation and the simpleshearing, specially, from the Ode strength theory. Finally, a generative relationship betweenthe ductile deformation domain of the brittle fault system, in the regional layer--slip andthe formation of the stratabound ore deposit is shown as well.     

Experimental study of the induced flow birefringence of a suspension of rigid particles at the transition from Couette flow to Taylor vortex flow

The flow birefringence induced in solutions of rigid particles is studied experimentally in the region of the axisymmetrical Taylor vortex flow which arises once the velocity gradient G in the annular gap of a conventional Couette cell reaches a critical value G _c .The measurements are performed for several values of G > G _c and for 10 radial observation points in the annular gap. Solutions of two types of rigid particles are investigated: the first is a suspension of flattened clay particles like bentonite, while the second contains rod-like particles of tobacco mosaic virus (TMV). The variations of the birefringence intensity n and of the extinction angle measured in the domain of the axisymmetrical flow show a different behavior according to the shape of the particle in solution. This fact is confirmed theoretically with a good agreement for the measurements performed with solutions of flat particles.     

On the surface modification of microchannels for microcapillary electrophoresis chips

This paper presents systematic investigation of the microchannel surface properties in microCE chips. Three popular materials for microCE chips, polydimethylsiloxane (PDMS), quartz, and glass, are used. The zeta potentials of these microchannels are calculated by measuring the EOF velocity to evaluate the surface properties after surface modification. The hydrophobic PDMS is usually plasma-treated for microCE applications. In this study, a new method using a high-throughput atmospheric plasma generator is adopted to treat the PDMS surface under atmospheric conditions. In this approach, the cost and time for surface treatment can be significantly reduced compared with the conventional vacuum plasma generator method. Experimental results indicate that new functional groups could be formed on the PDMS surface after treatment, resulting in a change in the surface property. The time-dependent surface property of the plasma-treated PDMS is then measured in terms of the zeta potential. Results show that the surface property will reach a stable condition after 1 h of plasma treatment. For glass CE chips, two new methods for changing the microchannel surface properties are developed. Instead of using complicated and time-consuming chemical silanization procedures for CE channel surface modification, two simple and reliable methods utilizing organic-based spin-on-glass and water-soluble acrylic resin are reported. The proposed method provides a fast batch process for controlling the surface properties of glass-based CE channels. The proposed methods are evaluated using PhiX-174 DNA maker separation. The experimental data show that the surface property is modified and separation efficiency greatly improved. In addition, the long-term stability of both coatings is verified in this study. The methods proposed in this study show potential as an excellent solution for glass-based microCE chip surface modification.     

Aging Process Effects on the Characteristics of Vacuum Residue Oxidation Products with the Addition of Crumb Rubber

This paper considers the effect of aging processes on viscoelastic characteristics of vacuum residue oxidation products modified with crumb rubber. Viscoelastic properties were compared to original bitumen raw material-vacuum residue and vacuum residue oxidation products during short-term and long-term aging. The complex shear modulus of the vacuum residue and its oxidation products decreased with an increase in temperature. Short-term aging resulted in increased shear modulus for all samples.The vacuum residue oxidation product modified with crumb rubber had the maximum values of the rutting parameter and fatigue parameter. There was an expansion of the temperature range of plasticity: for the vacuum residue oxidation product with crumb rubber, its value was 67.2 °C. The curves of the black diagram of the modified vacuum residue oxidation product are shifted towards smaller phase angles with the increase in the shear modulus, which indicates the increase in the stiffness and elasticity of the rubber bitumen binders. The vacuum residue oxidation product modified with crumb rubber corresponded to the rubber bitumen binder of the grade RBB 60/90, according to its physical and mechanical indicators.     

Phase Transitions Induced by Top-Priority of Randomization

We study the characteristics of phase transition to take the top-priority of randomization in the rules of NaSch model (i.e.noise-first model) into account via computing the relaxation time and the order parameter.The scaling exponents of the relaxation time and the scaling relation of order parameter,respectively,axe obtained.     

Global Stability to Steady Supersonic Rayleigh Flows in One-Dimensional Duct∗

Heat exchange plays an important role in hydrodynamical systems, which is an interesting topic in theory and application. In this paper, the authors consider the global stability of steady supersonic Rayleigh flows for the one-dimensional compressible Euler equations with heat exchange, under the small perturbations of initial and boundary conditions in a finite rectilinear duct.     

HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

基于孔口出流模型的实验研究及理论分析

基于孔口出流模型对底部有小孔的圆柱体容器中液体液面高度随时间的变化规律进行了实验研究,并通过计入液体表面张力引起的孔口收缩和流体黏滞力导致的能量损失对实验结果进行了理论分析,与实验结果一致.     

Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.