A Construction of Difference Sets in High Exponent 2-Groups Using Representation Theory

Nontrivial difference sets in groups of order a power of 2 are part of the family of difference sets called Menon difference sets (or Hadamard), and they have parameters (2^2d+2, 2^2d+1±2 ^d , 2^2d ±2 ^d ). In the abelian case, the group has a difference set if and only if the exponent of the group is less than or equal to 2 ^d+2. In [14], the authors construct a difference set in a nonabelian group of order 64 and exponent 32. This paper generalizes that result to show that there is a difference set in a nonabelian group of order 2^2d+2 with exponent 2 ^d+3. We use representation theory to prove that the group has a difference set, and this shows that representation theory can be used to verify a construction similar to the use of character theory in the abelian case.     

Asynchronous and corrected-asynchronous finite difference solutions of PDEs on MIMD multiprocessors

A major problem in achieving significant speed-up on parallel machines is the overhead involved with synchronizing the concurrent processes. Removing the synchronization constraint has the potential of speeding up the computation, while maintaining greater computation flexibility (e.g. differences in processors speed; differences in the data input to processors). We construct asynchronous (AS) finite difference schemes for the solution of PDEs by removing the synchronization constraint. We analyze the numerical properties of these schemes. Based on the analysis, we develop corrected-asynchronous (CA) finite difference schemes which are specifically constructed for an asynchronous processing. We present asynchronous (AS) and corrected-asynchronous (CA) finite difference schemes for the multi-dimensional heat equation. Although our discussion concentrates on the Euler scheme it should serve only as a sample, as it can be extended to other schemes and other PDEs.These schemes are implemented on the shared-memory multi-userSequent Balance machine. Numerical results for one and two dimensional problems are presented. It is shown experimentally that synchronization penalty can be about 50% of run time: in most cases, the asynchronous scheme runs twice as fast as the parallel synchronous scheme. In general, the efficiency of the parallel schemes increases with processor load, with the time-level, and with the problem dimension. The efficiency of the AS may reach 90% and over, but it provides accurate results only for steady-state values. The CA, on the other hand, is less efficient but provides more accurate results for intermediate (non steady-state) values. The results show the potential of developing asynchronous finite deference schemes for steady-state as well as non steadystate problems.This research was partially supported by a grant from The Basic Research Foundation administrated by The Israel Academy of Sciences and Humanities.A reduced version of the paper was presented at the 4th SIAM Conference on Parallel Processing for Scientific Computing, Dec. 11–13, 1989, Chicago, USA.The work by this author was supported by research grant 337 of the Israeli National Council for Research and Development in the years 1990–1991.This research was supported by the National Aeronautics and Space Administration under NASA Contract No. NASI-18107 while the author was in residence at the Institute for Computer Applications in Sciences and Engineering (ICASE), NASA Langley Research Center, Hampton, VA 23665, USA.     

Mixed methods on quadrilaterals and hexahedra

We describe a new family of discrete spaces suitable for use with mixed methods on certain quadrilateral and hexahedral meshes. The new spaces are natural in the sense of differential geometry, so all the usual mixed method theory, including the hybrid formulation, carries over to these new elements with proofs unchanged. Because transforming general quadrilaterals into squares introduces nonlinearity and because mixed methods involve the divergence operator, the new spaces are more complicated than either the corresponding Raviart-Thomas spaces for rectangles or corresponding finite element spaces for quadrilaterals. The new spaces are also limited to meshes obtained from a rectangular mesh through the application of a single global bilinear transformation. Despite this limitation, the new elements may be useful in certain topologically regular problems, where initially rectangular grids are deformed to match features of the physical region. They also illustrate the difficulties introduced into the theory of mixed methods by nonlinear transformations.     

A proof of Howard’s conjecture in homogeneous parallel shear flows

A rigorous mathematical proof of Howard's conjecture which states that the growth rate of an arbitrary unstable wave must approach zero, as the wave length decreases to zero, in the linear instability of nonviscous homogeneous parallel shear flows, is presented here for the first time under the restriction of the boundedness of the second derivative of the basic velocity field with respect to the vertical coordinate in the concerned flow domain.     

各向异性材料中共线刚性线夹杂的纵向剪切问题

本文研究各向异性材料中共线刚性线夹杂，（有时称作“硬裂纹”或“反裂纹”问题）的纵向剪切问题。利用复变函数方法，提出了一般问题的公式和某些实际重要问题的封闭形式解，考察了刚性线端点附近的应力分布．从本文解答的特殊情形，可以直接导出各向同性材料相应问题的公式和结果，包括某些已有的结果￣［７］．     

Mindlin板几何非线性分析的附加内部剪应变法

本文在几何非线性分析的Ｍｉｎｄｌｉｎ板元中引入单元附加内部剪应变，有效地解决了薄板情况下的剪切自锁问题．文中导出了相应的能量相容条件，给出了有限元非线性列式的全过程及有关簿板及中厚板大挠度问题的数值结果．     

基于小波变换和数学形态学的运动物体检测

提出了一种基于帧差法和小波变换相结合的运动目标检测方法,充分利用帧差法计算简单和小波变换的多尺度特性。实验表明,这种方法可以有效地从复杂自然场景的图像序列中检测出完整的运动目标。而且能够有效的抑制噪声。同时减少计算时间,满足检测的实时性要求。     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

The optical nonreciprocal response based on a four-mode optomechanical system

We propose a scheme for realizing the optical nonreciprocal response based a four-mode optomechanical system,consisting of two charged mechanical modes and two linearly coupled optical modes. Two charged mechanical modes are coupled by Coulomb interaction, and two optical modes are coupled to one of mechanical modes by radiation pressure. We numerically evaluate the transmission probability of the probe field to obtain the optimum optical nonreciprocal response parameters. Also, we show that the optical nonreciprocal response is caused by the quantum interference between the optomechanical couplings and the linearly coupled interaction that breaks the time-reversal symmetry.     

金属Al背电极二维AZO光栅的制备和陷光特性

研究了背电极金属Al膜上二维ZnO:Al光栅的制备及其反射光谱特性.在厚度为300 nm的Al膜上溅射80 nm ZnO:Al薄膜,旋涂AZ5206光刻胶,用波长为325 nm的激光进行光刻制作光栅掩模.采用溶脱-剥离法在Al衬底上制备周期(624~1250 nm)和槽深(100~300 nm)可独立调控的ZnO:Al二维光栅.表面形貌采用原子力显微镜和扫描电镜观察,反射光谱用带积分球的分光光度计测试,双向反射分布函数用散射仪测量.结果表明,300 nm Al膜上织构二维ZnO:Al光栅背电极结构,当光栅槽深为228 nm,周期从624 nm增加到986 nm时,背电极总反射率、漫反射率以及雾度均随光栅周期增大而显著增加,而当周期从986 nm增加到1250 nm时,总反射率、漫反射率以及雾度略有增加.双向反射分布函数测试结果进一步证实了上述实验结果,即随着周期增大,漫反射峰值越大,衍射峰个数也增多.提示背反电极上槽深为228 nm、周期为986 nm的二维ZnO:Al光栅具有较好的散射效果,其中漫反射占总反射的百分比为45%.