HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

增材制造八角桁架点阵结构材料的力学行为

基于激光选区熔化增材制造技术(SLM), 以GP1不锈钢为母材, 制备4种相对密度的八角桁架点阵结构试样, 开展了准静态单轴压缩和直接撞击式霍普金森压杆实验, 并结合显式有限元计算模拟, 研究了相对密度和加载速率对八角桁架点阵结构试样在力学响应、变形模式和吸能特性的影响. 结果显示: (1)相对密度是影响八角桁架点阵结构材料力学响应的关键参数, 屈服载荷随着相对密度基本呈线性增长, 并且表现出明显的应变率强化效应; (2)在准静态压缩下, 随着相对密度增大, 八角桁架点阵结构的变形模式由弯扭屈曲模式逐渐向稳定屈服模式转变; 而在冲击压缩下, 八角桁架点阵结构的变形模式随着冲击速度由对称稳定变形模式向非对称逐渐压垮模式转变; (3)八角桁架点阵结构总吸能随着相对密度线性增大, 而比吸能随着相对密度呈现双线性变化, 在相对密度30%处出现拐折, 当相对密度高于30%后, 比吸能增大缓慢; (4)与准静态加载相比, 冲击加载下八角桁架点阵结构的总吸能和比吸能都显著提升.     

冲击荷载下C型G550冷弯钢的断裂机理研究

以C型G550薄壁冷弯钢构件为研究对象, 通过材料在不同应变率下的拉伸实验和数值模拟数据得到Johnson-Cook (J-C)本构模型和Johnson-Cook失效模型参数. 通过Abaqus软件模拟了不同冲击荷载作用下C型冷弯钢构件撕裂破坏的全过程, 利用落锤装置轴向冲击试验进行对比, 其实验结果与有限元数值模拟结果有良好的一致性. 此外, 对冲击试样撕裂断口进行微观形貌分析, 得到构件的断裂机理. 结果表明: 随着冲击速度的提高, 冲击力对构件的加载时间增加, 构件需要较大的塑性变形来吸收冲击能量; 冲击速度越高, 裂纹扩展功所占吸收冲击能量的比例越大, 显示出高速下裂纹扩展的能力越好; 冲击速度较高时, 以脆性断裂为主, 断口出现解理面, 甚至在高速变形时发生了绝热剪切破坏.     

Controlling the surface buckling wrinkles by patterning the material system of hard-nano-film/soft-matter-substrate

Wrinkling and buckling of nano-films on the compliant substrate are always induced due to thermal deformation mismatch.This paper proposes effective means to control the surface wrinkling of thin film on the compliant substrate,which exploits the curvatures of the curve cracks designed on the stiff film.The procedures of the method are summarized as:1)curve patterns are fabricated on the surface of PDMS(Polydimethylsiloxane)substrate and then the aluminum film with the thickness of several hundred nano-meters is deposited on the substrate;2)the curve patterns are transferred onto the aluminum film and lead to cracking of the film along the curves.The cracking redistributes the stress in the compressed film on the substrate;3)on the concave side of the curve,the wrinkling of the film surface is suppressed to be identified as shielding effect and on the convex side the wrinkling of the film surface is induced to be identified as inductive effect.The shielding and inductive effects make the dis-ordered wrinkling and buckling controllable.This phenomenon provides a potential application in the fabrication of flexible electronic devices.     

Expected thermal deformation and wavefront preservation of a cryogenic Si monochromator for Cornell ERL beamlines

Cornell energy‐recovery linac (ERL) beamlines will have higher power density and higher fractional coherence than those available at third‐generation sources; therefore the capability of a monochromator for ERL beamlines has to be studied. A cryogenic Si monochromator is considered in this paper because the perfect atomic structure of Si crystal is needed to deliver highly coherent radiation. Since neither the total heat load nor the power density alone can determine the severity of crystal deformation, a metric called modified linear power density is used to gauge the thermal deformation. For all ERL undulator beamlines, crystal thermal deformation profiles are simulated using the finite‐element analysis tool ANSYS, and wavefront propagations are simulated using Synchrotron Radiation Workshop. It is concluded that cryogenic Si monochromators will be suitable for ERL beamlines in general.     

Particle size,size distribution and morphological evaluation of glass fiber reinforced plastic (GRP) industrial by-product

The waste management of glass fiber reinforced polymer (GRP) materials, in particular those made with thermosetting resins, is a critical issue for the composites industry because these materials cannot be reprocessed. Therefore, most thermosetting GRP waste is presently sent to landfill, in spite of the significant environmental impact caused by their disposal in this way. The limited GRP waste recycling worldwide is mostly due to its intrinsic thermosetting properties, lack of characterization data and unavailability of viable recycling and recovery routes. One of the possibility for re-using GRP industrial by-product is in form of powder as a partial aggregate replacement or filler addition in cement based composites for applications in sustainable construction materials and technologies. However, the feasibility of this kind of reutilization strongly depends on the morphology and particle size distribution of a powder made up of polymer granules and glass fibers. In the present study, the use of image analysis method, based on scanning electron microscopy (SEM) and ImageJ processing program, is proposed in order to evaluate the morphology of the particles and measure the particle size and size distribution of fine GRP waste powder. The obtained results show a great potential of such a method in order to be considered as a standardized method of measurement and analysis in order to characterize the grain size and size distribution of GRP particles before exploiting any compatibility issue for its recycling management.     

锕系核集体运动的负宇称态

从锕系区40多个核的正负宇称态的实验数据,如激发能、J^π、电偶极跃迁等,得到一系列与核结构有关的物理量,如宇称劈裂能级差δE_I,正负宇称带的第一和第二类转动惯量J⁽¹⁾和J⁽²⁾及第一负宇称态的电偶极跃迁强度比等,以及它们与角动量I或转动角频率ω的动力学和核子数A的系统行为,从而为研究锕系核负宇称态的产生机制及动力学特点提供了信息.     

Laser spectroscopy of high spin isomers – a review

This review summarizes the experimental data on charge radii differences among ground state and high spin isomeric states determined by high-resolution laser spectroscopic methods. A comparison is presented between radii changes obtained from the isomeric shifts in the atomic spectra and from the quadrupole moments of both ground and isomeric states under the assumption that the radii changes are determined by the difference of the quadrupole deformations. Special attention is paid to isomers arising from the break-up of nucleon pairs and isomers of odd–odd nuclei. The characteristic features of the radii changes for isomeric states of different origin are discussed.     

裂缝性应力敏感油藏流固耦合的数值模拟

以裂缝各向异性全张量渗透率动态耦合渗流模型为基础,建立三维三相裂缝各向异性特低渗透油藏流固耦合数学模型,并运用模块化显示耦合迭代求解建立流固耦合渗流数值模拟方法,编制耦合求解程序.研究表明:对于裂缝性油藏,随着油藏开采过程中压力的变化,岩石变形和储层介质的各向异性应变特性使开发过程中多组裂缝的变形程度不同,引起裂缝渗透率的非线性变化,进而使油藏裂缝渗透率张量主值发生旋转,改变液流方向、影响油藏开发效果.