Monodisperse Six-Armed Starbursts based on Truxene-Cored Multibranched Oligofluorenes: Design,Synthesis, and Stabilized Lasing Characteristics

A series of monodisperse six-armed conjugated starbursts ( Tr1F , Tr2F , and Tr3F ) containing a truxene core and multibranched oligofluorene bridges capped with diphenylamine (DPA) units has been designed, synthesized, and investigated as robust gain media for organic semiconductor lasers (OSLs). The influence of electron-rich DPA end groups on their optoelectronic characteristics has been discussed at length. DPA cappers effectively raise HOMO levels of the starbursts, thus enhancing the hole injection and transport ability. Solution-processed electroluminescence devices based on the resulting six-armed starbursts exhibited efficient deep-blue electroluminescence with clear reduced turn-on voltages (3.2–3.5 V). Moreover, the resulting six-armed molecules showed stabilized electroluminescence and amplified spontaneous emission with low thresholds (27.4–63.9 nJ pulse⁻¹), high net gain coefficients (80.1–101.3 cm⁻¹), and small optical loss (2.6–4.4 cm⁻¹). Distributed feedback OSLs made from Tr3F exhibited a low lasing threshold of 0.31 kW cm⁻² (at 465 nm). The results suggest that the construction of truxene-centered six-armed conjugated starbursts with the incorporation of DPA units can effectively enhance EL properties by precisely regulating the HOMO energy levels, and further optimizing their optical gain properties.     

管式炉中半导体激光器巴条Au80Sn20焊料封装研究

为了提高半导体激光器的封装质量和效率,引入管式炉利用夹具进行批量封装。由于封装质量的好坏直接影响半导体激光器的输出特性和使用寿命,利用MOCVD生长808 nm芯片,重点分析了管式炉温度和封装时间对半导体激光器巴条双面金锡封装质量的影响。利用X射线检测、结电压、光电特性参数和smile效应测试手段,确定了管式炉封装半导体激光器巴条的最优封装条件,为以后的产业化提供了指导意义。     

Black phosphorus saturable absorber for ultrafast mode‐locked pulse laser via evanescent field interaction

Black phosphorus, or BP, has found a lot of applications in recent years including photonics. The most recent studies have shown that the material has an excellent optical nonlinearity useful in many areas, one of which is in saturable absorption for passive mode‐locking. A direct interaction scheme for mode‐locking, however, has a potential to optically cause permanent damage to the already delicate material. Evanescent field interaction scheme has already been proven to be a useful method to prevent such danger for other 2‐dimensional nanomaterials. In this report, we have utilized the evanescent field interaction to demonstrate that the optical nonlinear characteristics of BP is sufficiently strong to use in such an indirect interaction method. The successful demonstration of the passive mode‐locking operation has generated pulses with the pulse duration, repetition rate, and time bandwidth product of 2.18 ps, 15.59 MHz, and 0.336, respectively.     

Ionic hexagonal columnar metallomesogens derived from tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine

A series of transition metal (Ni, Cu, Pd) complexes derived from macrocyclic tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine (TAAB) was synthesized and their mesomorphic properties studied by differential scanning calorimetry, polarized optical microscopy and X-ray powder diffraction (XRD). These compounds have eight alkoxy side chains attached around the central molecular core and form disc-like molecules. All the derivatives exhibited columnar mesophases over a wide range of temperature. The mesomorphic behaviour was found to be dependent on the incorporated metal and the carbon length of the alkoxy side chains. The clearing temperatures decreased in the order M = Ni > Pd > Cu; this decrease was probably due to the size of the metal ions. Some derivatives with shorter side chains (n = 10, 12) were room temperature liquid crystals. All compounds were found to exhibit hexagonal columnar (Col_h) phases which were confirmed by powder XRD.     

Influence of sputter power on structural and electrical properties of TiO2 films for Al/TiO2/Si gate capacitors

Titanium dioxide (TiO₂) thin films were deposited onto p‐Si substrates held at room temperature by reactive Direct Current (DC) magnetron sputtering at various sputter powers in the range 80–200 W. The as‐deposited TiO₂ films were annealed at a temperature of 1023 K. The post‐annealed films were characterized for crystallographic structure, chemical binding configuration, surface morphology and optical absorption. The electrical and dielectric properties of Al/TiO₂/p‐Si structure were determined from the capacitance–voltage and current–voltage characteristics. X‐ray diffraction studies confirmed that the as‐deposited films were amorphous in nature. After post‐annealing at 1023 K, the films formed at lower powers exhibited anatase phase, where as those deposited at sputter powers > 160 W showed the mixed anatase and rutile phases of TiO₂. The surface morphology of the films varied significantly with the increase of sputter power. The electrical and dielectric properties on the air‐annealed Al/TiO₂/p‐Si structures were studied. The effect of sputter power on the electrical and dielectric characteristics of the structure of Al/TiO₂/p‐Si (metal‐insulator‐semiconductor) was systematically investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

有机半导体非平衡态HOMO和LUMO能量位移规律与OLED中“热激子”形成的唯象理解

以能斯特方程为基础, 通过分析电流密度与氧化还原物种活度变化, 即载流子浓度变化的关系, 计算出有机半导体材料电极电势的变化, 从而建立起有机半导体前线轨道, 即最高占据分子轨道(HOMO)能级和最低未被占据分子轨道(LUMO)能级相对于热力学平衡态的能量位移随电流密度变化的数学关系. 进而依据能级能量位移引起的能隙变化, 提出了有机电致发光显示器（OLED）中“热激子”的产生机制.     

太阳能光催化分解水制氢※

利用太阳能光催化分解水制氢是解决能源环境问题并实现太阳能有效转化和储存最有前途的技术之一, 这一“圣杯”式反应经过几十年不懈努力取得了诸多重要研究进展. 本文将综述光催化分解水制氢体系的基本概念、活性测试方法与注意事项、光催化材料种类等; 并从光催化分解水制氢的光吸收、光生电荷分离和表面催化反应等基本过程和关键科学问题的角度总结其重要研究进展, 最后对于太阳能光催化分解水制氢的挑战和潜在的发展方向进行分析和展望. 希望通过本综述的简要介绍能让刚从事光催化分解水制氢研究的青年科技人员清晰地了解掌握该领域的一些基本概念、操作规范、研究总体进展和现状等.     

Temperature and Composition Dependent Optical Properties of CdSe/CdS Dot/Rod-Based Aerogel Networks

Employing nanocrystals (NCs) as building blocks of porous aerogel network structures allows the conversion of NC materials into macroscopic solid structures while conserving their unique nanoscopic properties. Understanding the interplay of the network formation and its influence on these properties like size-dependent emission is a key to apply techniques for the fabrication of novel nanocrystal aerogels. In this work, CdSe/CdS dot/rod NCs possessing two different CdSe core sizes were synthesized and converted into porous aerogel network structures. Temperature-dependent steady-state and time-resolved photoluminescence measurements were performed to expand the understanding of the optical and electronic properties of these network structures generated from these two different building blocks and correlate their optical with the structural properties. These investigations reveal the influence of network formation and aerogel production on the network-forming nanocrystals. Based on the two investigated NC building blocks and their aerogel networks, mixed network structures with various ratios of the two building blocks were produced and likewise optically characterized. Since the different building blocks show diverse optical response, this technique presents a straightforward way to color-tune the resulting networks simply by choosing the building block ratio in connection with their quantum yield.     

Synthesis,crystal structure,and electronic structure of Li2PbSiS4: a quaternary thiosilicate with a compressed chalcopyrite‐like structure

The new quaternary thiosilicate, Li₂PbSiS₄ (dilithium lead silicon tetrasulfide), was prepared in an evacuated fused‐silica tube via high‐temperature, solid‐state synthesis at 800 °C, followed by slow cooling. The crystal structure was solved and refined using single‐crystal X‐ray diffraction data. By strict definition, the title compound crystallizes in the stannite structure type; however, this type of structure can also be described as a compressed chalcopyrite‐like structure. The Li⁺ cation lies on a crystallographic fourfold rotoinversion axis, while the Pb²⁺ and Si⁴⁺ cations reside at the intersection of the fourfold rotoinversion axis with a twofold axis and a mirror plane. The Li⁺ and Si⁴⁺ cations in this structure are tetrahedrally coordinated, while the larger Pb²⁺ cation adopts a distorted eight‐coordinate dodecahedral coordination. These units join together via corner‐ and edge‐sharing to create a dense, three‐dimensional structure. Powder X‐ray diffraction indicates that the title compound is the major phase of the reaction product. Electronic structure calculations, performed using the full potential linearized augmented plane wave method within density functional theory (DFT), indicate that Li₂PbSiS₄ is a semiconductor with an indirect bandgap of 2.22 eV, which compares well with the measured optical bandgap of 2.51 eV. The noncentrosymmetric crystal structure and relatively wide bandgap designate this compound to be of interest for IR nonlinear optics.