Magnetic polyethyleneimine functionalized reduced graphene oxide as a novel magnetic solid-phase extraction adsorbent for the determination of polar acidic herbicides in rice

A novel magnetic polyethyleneimine modified reduced graphene oxide (Fe₃O₄@PEI-RGO) had been fabricated based on a self-assemble approach between positive charged magnetic polyethyleneimine (Fe₃O₄@PEI) and negative charged GO sheets via electrostatic interaction followed by chemical reduction of GO to RGO. The as-prepared Fe₃O₄@PEI-RGO was characterized by transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), thermal gravimetric analyzer (TGA), vibrating sample magnetometer (VSM) and zeta potential analysis, and then was successfully applied to determine four phenoxy acid herbicides and dicamba in rice coupled with high performance liquid chromatography (HPLC). As a surface modifier of RGO, PEI not only effectually affected the surface property of RGO (e.g. zeta potential), but also changed the polarity of RGO and offered anion exchange groups to polar acidic herbicides, which would directly influence the type of adsorbed analytes. Compared with Fe₃O₄@PEI, Fe₃O₄/RGO and Fe₃O₄@PEI-GO, the as-prepared Fe₃O₄@PEI-RGO, integrating the superiority of PEI and RGO, showed higher extraction efficiency for polar acidic herbicides. Besides, the adsorption mechanism was investigated as well. It turned out that electrostatic interaction and π-π interaction were considered to be two major driving force for the adsorption process. Response surface methodology (RSM), a multivariate experimental design technique, was used to optimize experimental parameters affecting the extraction efficiency in detail. Under the optimal conditions, a satisfactory performance was obtained. The calibration curves were linear over the concentration ranging from 2 to 300 ng g⁻¹ with correlation coefficients (r) between 0.9985 and 0.9994. The limits of detection (LODs) were in the range of 0.67–2 ng g⁻¹. The recoveries ranged from 87.41% to 102.52% with relative standard deviations (RSDs) less than 8.94%. Taken together, the proposed method was an efficient pretreatment and enrichment procedure and could be successfully applied for selective extraction and determination of polar acidic herbicides in complex matrices.     

Reaction mechanism of hydrogen cyanide catalyzed by gas‐phase titanium

To explore the details of the reaction mechanism of Ti atom with HCN, the reactive site and reactivity have been predicted first, the potential energy surfaces have been systematically studied at different theoretical levels. Four different reaction pathways and product distribution are discussed by means of the activation strain model and Curtin–Hammett principle. In addition, the structures, bonding properties and the frontier molecular orbital interaction diagrams of main stationary points were analyzed by atoms in molecules and natural bond orbital. The results show that for this system, there are four reaction pathways, in which path b (HCN＋Ti→IM1→TS1→IM2→T2b→IM4) is the most favorable pathway.     

Multi-centred hydrogen bonds between water and perchlorate anion

Results of classical molecular dynamics simulations are presented for the re-orientational dynamics of water hydrogen bonded to perchlorate anion. Different mechanisms of bond formation are presented. Due to its regular tetrahedron geometry the perchlorate anion can make classical as well as bifurcated and trifurcated hydrogen bonds. The angular variation of water in the first solvation shell of perchlorate suggests the transitional character of multi-centred hydrogen bonds. As a result water molecules can slide around the anion.     

Metal sulfide: An efficient promoter for the synthesis of 2-mercaptobenzothiazoles from 2-haloanilines and carbon disulfide

A convenient method has been developed for the preparation of a variety of 2-mercaptobenzothiazoles from 2-haloanilines and CS₂ mediated by metal sulfide. In this reaction, 2-haloanilines reacted with CS₂ in the presence of Na₂S?·?9H₂O to form 2-mercaptobenzothiazoles. Na₂S?·?9H₂O functioned both as an activator of CS₂ and as a base. Furthermore, NMR analysis was used to identify the different reaction mechanisms of 2-haloanilines and CS₂ mediated by Na₂S or 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), which demonstrated that Na₂S interacted only with CS₂, while DBU reacted with both 2-iodoaniline and CS₂.     

Solvent-free synthesis of dibenzo[b,j][1,10]phenanthroline derivatives using Eaton’s reagent as catalyst

A new class of dibenzo[b,j][1,10]phenanthrolines has been prepared. The synthon acridones were achieved in very good yield by a one-pot reaction of 2-amino-5-chloro or 2′-chloro/flouro-substituted benzophenones with 1,2-cyclohexanedione in the presence of freshly prepared Eaton’s reagent (phosphorus pentoxide–methanesulfonic acid) without solvent, through Friedländer synthesis. Then these intermediates were reacted with 2-amino-3,5-dibromobenzaldehyde to afford 1,3-dibromo-10-chloro-8-aryl-6,7-dihydrodibenzo[b,j][1,10]phenanthroline. Also an one-pot reaction between 2?mol of 2-amino-5-chloro aryl benzophenones with 1?mol of 1,2-cyclohexanedione to get 3,10-dichloro-5,8-diaryl-6,7-dihydrodibenzo[b,j][1,10]phenanthroline has also been reported. The newly synthesized structures of the compounds were deduced by spectroscopic techniques.     

Fabrication of urchin‐like Ag/ZnO hierarchical nano/microstructures based on galvanic replacement mechanism and their enhanced photocatalytic properties

Urchin‐like Ag/ZnO hierarchical nano/microstructures have been synthesized through a facile low‐temperature hydrothermal growth method based on galvanic replacement mechanism. The experimental results show that the urchin‐like Ag/ZnO heterostructures are formed through the epitaxial growth of ZnO nanorods on the {111} facets of Ag nanoparticles along their own c‐axis. The photocatalytic properties of the products were evaluated by the degradation of RhB dye solution under ultraviolet irradiation, and the results show that the products exhibit significantly enhanced photocatalytic properties comparing with pure ZnO nanorods. The products with a Ag content of 35.64 atom % prepared with a Ag⁺ concentration in solution of 5 mM exhibit surprisingly high degradation rate (99.5%) for RhB dye solution (4 mg/L) after photocatalytic reaction for only 14 min under ultraviolet irradiation. The Schottky barrier formed at the metal‐semiconductor interfaces improves the segregation of charges and prevents the charge recombination, and thus significantly enhances the photocatalytic activities of the products. On the other hand, the high stability of the urchin‐like Ag/ZnO hierarchical nano/microstructures can effectively prevent the aggregation of nanostructures with simultaneously preserving high photocatalytic properties due to the existence of nanosized unites. Copyright © 2016 John Wiley & Sons, Ltd.     

Mechanistic insights on DBU catalyzed β‐amination of nbs to chalcone driving by water: Multiple roles of water

DFT calculations were conducted to pursue deeper understandings on the mechanism and the explicit role of trace water in the DBU‐catalyzed β‐amination of NBS to chalcone. Being different from previously proposed by Liang et al., a cooperative participation of both DBU and water is noticed in the preferred mechanism. The preferential mechanistic scenario assisted by water undergoes three major steps: the formation of succinimide and HBrO, concerted nucleophilic addition and H‐shift, and keto‐enol tautomerization. Moreover, we found that DBU‐HBrO is unnecessary in the third step and three‐water‐cluster assisted keto‐enol tautomerization is the most advantageous case. It is further noted that the catalytic position of the third water molecule and the proton shift orientation to some extent affect step 3 via O···H O and O H···π interactions, which is confirmed by AIM analysis. The computational results suggest that water molecules play pivotal roles as reactant, catalyst, and stabilizer to promote the reaction of chalcone and NBS. The origin of the more stable transition state structure in the rate‐determining step of DBU‐water catalyzed mechanism is ascribed to noncovalent interactions, halogen bond, and electrostatic interactions than DBU only ones. © 2017 Wiley Periodicals, Inc.     

Mg-ion conducting gel polymer electrolyte membranes containing biodegradable chitosan: Preparation,structural, electrical and electrochemical properties

A biodegradable gel polymer electrolyte system based on chitosan/magnesium trifluoromethanesulfonate/1-ethyl-3-methylimidazolium trifluoromethanesulfonate (CA/Mg (Tf)₂/EMITf) is developed. The structure, thermal performance, mechanical properties, ionic conductivity, relaxation time, electrochemical stability and ionic transport number of the membranes are analyzed by various techniques. The ion migration mainly depends on the complexation and decomplexation of Mg²⁺ with amine band (NH₂) in chitosan. The 90CA-10Mg (Tf)₂ system plasticized with 10% EMITf (relative to the amount of 90CA-10Mg (Tf)₂) is identified as the optimum one and the temperature dependence of ionic conductivity obeys the Arrhenius rule. Moreover, the relaxation time of the electrolyte is very short, being just 1.25 × 10⁻⁶ s, and its electrochemical stability window is quite wide, being up to 4.15 V. The anodic oxidation and cathodic reduction of Mg at the Mg-electrode/electrolyte interface is facile, and the ionic transference number of this electrolyte is 0.985, indicating that it could be a potential electrolyte candidate for Mg-ion devices.     

Effects of alkyltrimethylammonium bromide surfactants on the kinetics of the oxidation of tris(1,10-phenanthroline)iron(II) by azido-pentacyanocobaltate(III) complex

The redox reaction between tris(1,10-phenanthroline)iron(II), [Fe(phen)₃]²⁺, and azido-pentacyanocobaltate(III), [Co(CN)₅N₃]^3? was investigated in three cationic surfactants: dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB) and cetyltrimethylammonium bromide (CTAB) in the presence of 0.1?M NaCl at 35°C. Second-order rate constant in the absence and presence of surfactant, k_w and k_ψ, respectively, were obtained in the concentration ranges DTAB?=?0???4.667?×?10^?4?mol?dm^?3, TTAB?=?0–9.364?×?10^?5?mol?dm^?3, CTAB?=?0???6.220?×?10^?5?mol?dm^?3. Electron transfer rate was inhibited by the surfactants with premicelllar activity. Inhibition factors, k_w/k_ψ followed the trend CTAB?>?TTAB?>?DTAB with respect to the surfactant concentrations used. The magnitudes of the binding constants obtained suggest significant electrostatic and hydrophobic interactions. Activation parameters ΔH^≠, ΔS^≠, and E_a have larger positive values in the presence of surfactants than in surfactant-free medium. The electron transfer is proposed to proceed via outer-sphere mechanism in the presence of the surfactants.