Dimensional considerations on the mechanical properties of 3D printed polymer parts

Additive manufacturing offers a useful and accessible tool for prototyping and manufacturing small volume functional parts. Polylactic acid (PLA) and thermoplastic polyurethane (TPU) are amongst the most commonly used materials. Characterising 3D printed PLA and TPU is potentially important for both designing and finite element modelling of functional parts. This work explores the mechanical properties of additively manufactured PLA/TPU specimens with consideration to design parameters including size, and infill percentage. PLA/TPU specimens are 3D-printed in selected ISO standard geometries with 20%, 60%, 100% infill percentage. Tensile and compression test results suggest that traditional ISO testing standards might be insufficient in characterising 3D printed materials for finite element modelling or application purposes. Infill percentage in combination to design size, may significantly affect the mechanical performance of 3D printed parts. Dimensional variation may cause inhomogeneity in mechanical properties between large and small cross section areas of the same part. The effect was reduced in small cross section parts where reducing the nominal infill had less effect on the resulting specimens. The results suggest that for 3D printed functional parts with significant dimensional differences between sections, the material properties are not necessarily homogeneous. This consideration may be significant for designers using 3D printing for applications, which include mechanical loading.     

[100]LiF单晶在60 GPa以内冲击加载下的高压屈服强度特性

获取光学窗口自身的高压强度特性是开展材料高压高应变率冲击响应行为精密测量和数据反演的重要基础。利用平板撞击和双屈服面法,通过冲击-卸载、冲击-再加载原位粒子速度剖面精细测量和数据反演,获得了约60 GPa范围内[100]LiF屈服强度特性随冲击压力的变化规律。结果表明:在实验压力范围内,[100]LiF的屈服强度随加载压力的提高而显著提高,压力硬化效应显著;同时,LiF在冲击加载下的屈服强度高于磁驱准等熵加载结果,应变率硬化效应强于热软化效应。采用Huang-Asay模型确定了可描述冲击加载[100]LiF强度特性的本构模型参数,为LiF在强度、相变、层断裂等加窗测量实验中的深入应用和数据准确解读提供了重要支撑。     

低压闪蒸液滴形态和温度变化的研究

将液滴在常压下突然置于低压环境中,液滴由最初的平衡状态变成过热状态,发生闪蒸.本文实验研究了低压闪蒸液滴内部形态和温度的变化,系统描述了液滴闪蒸过程中的各种形态变化,总结了稳态闪蒸和稳态结冰过程中环境压力和初始温度对温度变化的影响.实验结果表明液滴闪蒸分六种形态.稳态闪蒸中环境压力越低,液滴的最终温度也越低;液滴的初始温度越高,降到最低温度的时间越长.稳态结冰过程中,液滴初始温度增加,液滴结冰温度和结冰回升最高温度也随之增加;液滴的结冰温度和回升最高温度随环境压力的增高而减小.     

片段化森林中檵木幼苗种内叶经济性状变异及其驱动因子

在异质性生境中,种内功能性状变异有助于植物对环境的适应,进而影响种群更新、群落构建和生态系统过程。探讨了种内叶经济性状的变异及受生境异质性的塑造情况。以千岛湖片段化生境中的常见种檵木（Loropetalum chinense）的幼苗为研究对象,测定了200株檵木幼苗个体水平的7个叶经济性状（比叶面积SLA、叶全碳量C、叶全氮量N等）及其对应的生境因子（郁闭度、土壤全碳量、土壤全氮量等）,采用相关性检验、主成分分析和线性混合效应模型等方法探讨片段化森林中檵木幼苗的种内叶经济性状变异及生境异质性对该变异的驱动作用。结果显示：（1） 在7个叶经济性状所构成的21对相关性分析中,有12对显著相关。经主成分分析降维后,主成分1（PC1）占性状总变异的43.02%,主要与比叶面积、叶绿素浓度、叶全氮量呈正相关,与叶干物质质量分数和叶碳氮比呈负相关,体现了檵木的种内叶经济谱,可反映叶片的最大光合效率。（2）片段化对生境条件和叶经济性状均有影响。岛屿森林群落的郁闭度显著低于大陆。相对于大陆,岛屿中的檵木幼苗趋向于更小的PC1值（缓慢投资-收益策略）;大岛边缘较大岛内部偏向于更小的PC1值。（3）生境因子中,郁闭度对PC1具有显著正效应。研究表明,片段化生境中的檵木在幼苗阶段存在叶经济谱,生境片段化可通过影响生境条件进而改变檵木幼苗的叶经济性状。随着生境片段化程度的加剧,檵木幼苗的叶经济性状逐渐向缓慢投资-收益策略靠拢。     

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

Mutation scanning-coupled analysis of haplotypic variability in mitochondrial DNA regions reveals low gene flow between human and porcine Ascaris in endemic regions of China

Haplotypic variation within and among the Ascaris populations representing six provinces in China was investigated. Mitochondrial DNA regions in the cytochrome c oxidase subunit 1 (cox1) and NADH dehydrogenase subunit 1 (nad1) genes were amplified by PCR from total genomic DNA samples (n > 720) from Ascaris individuals from humans and pigs, and subjected to mutation scanning and subsequent selective sequencing. For the cox1, ten different electrophoretic profiles were recorded for human Ascaris, and the same number for pig Ascaris, one of them being common to both host species. For the nad1, 11 different profiles were detected for human Ascaris, and 15 for pig Ascaris. Having defined all haplotypes (20 for pcox1 and 26 for pnad1) by sequencing, their frequencies were estimated in each of the two host species and each of the six provinces. For each mitochondrial region, the frequency of the different haplotypes varied considerably, depending on host species and geographical origin. Analysis of the sequence data (representing all haplotypes for each mitochondrial locus) by F-statistics indicated restricted gene flow between human Ascaris and pig Ascaris, and supported the conclusions from previous molecular epidemiological investigations that pigs are not a significant source of Ascaris infection in humans in endemic regions.     

Development and characterization of a magnetic bead-quantum dot nanoparticles based assay capable of Escherichia coli O157:H7 quantification

The development and characterization of a magnetic bead (MB)-quantum dot (QD) nanoparticles based assay capable of quantifying pathogenic bacteria is presented here. The MB-QD assay operates by having a capturing probe DNA selectively linked to the signaling probe DNA via the target genomic DNA (gDNA) during DNA hybridization. The signaling probe DNA is labeled with fluorescent QD₅₆₅ which serves as a reporter. The capturing probe DNA is conjugated simultaneously to a MB and another QD₆₅₅, which serve as a carrier and an internal standard, respectively. Successfully captured target gDNA is separated using a magnetic field and is quantified via a spectrofluorometer. The use of QDs (i.e., QD₅₆₅/QD₆₅₅) as both a fluorescence label and an internal standard increased the sensitivity of the assay. The passivation effect and the molar ratio between QD and DNA were optimized. The MB-QD assay demonstrated a detection limit of 890 zeptomolar (i.e., 10⁻²¹ mol L⁻¹) concentration for the linear single stranded DNA (ssDNA). It also demonstrated a detection limit of 87 gene copies for double stranded DNA (dsDNA) eaeA gene extracted from pure Escherichia coli (E. coli) O157:H7 culture. Its corresponding dynamic range, sensitivity, and selectivity were also presented. Finally, the bacterial gDNA of E. coli O157:H7 was used to highlight the MB-QD assay's ability to detect below the minimum infective dose (i.e., 100 organisms) of E. coli O157:H7 in water environment.     

不同载荷下3Cr13不锈钢涂层磨损寿命研究

在T-11摩擦磨损试验机上研究了不同载荷下高速电弧喷涂3Cr13不锈钢涂层的磨损寿命.提出载荷-涂层磨损寿命耦合的关系函数方程.通过对涂层磨损形貌观察,分析了不同载荷对磨损失效机制的影响.结果表明:当载荷较低时,涂层磨损寿命分散程度大,磨损主要失效机制为点蚀和剥落;当载荷较高时,涂层磨损寿命分散程度小,分层是引发涂层磨损失效的关键机制.     

线性随机桁架结构的平稳随机响应分析

研究了随机桁架结构的平稳随机响应问题。同时考虑结构的物理参数、几何尺寸的随机性，从结构平稳随机响应在频域上的表达式出发，利用求解随机变量函数矩的方法，导出了随机桁架结构在平稳随机激励下位移响应均方值的均值、均方差和变异系数的计算表达式。通过算例考察了随机荷载激励下结构物理参数、几何尺寸的随机性对结构随机响应的影响。     

GLOBAL CLASSICAL SOLUTIONS WITH SMALL INITIAL TOTAL VARIATION FOR QUASILINEAR HYPERBOLIC SYSTEMS

By means of the continuous Glimm functional,a proof is given on the global existence ofclassical solutions to Cauchy problem for general first order quasilinear hyperbolic systems withsmall initial total rariation.