聚丙烯/聚对苯二甲酸乙二酯共混自增强材料的研究(Ⅰ)

本文根据聚丙烯（ＰＰ）与聚对苯二甲酸乙二醇酯（ＰＥＴ）共混对在熔 融状态下．流动粘度差阳溶度参数差大的特点，用挤出造粒的方法制得 共熔成纤目增强材料。通过扫描电镜观察．证实ＰＰ／ＰＥＴ比从９５／５到 ８０／２０时。ＰＥＴ均以纤维状结构分布在ＰＰ基质中。该共熔成纤体具有 良好的机械性能。在未加偶联剂时，拉伸强度虽略比纯ＰＰ低．但抗冲击 强度与纯ＰＰ相当。该结果可用于指导ＰＰ的改性和ＰＥＴ废料再生利用 工作。     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Cycloarsanes (AsCF3)n (n = 4, 5) – Precursors for the Highly Reactive Diarsene F3CAs=AsCF3

Tetrakis(trifluoromethyl) cyclotetraarsane (F₃CAs)₄ ( 2 ) was used to repeat the UV initiated [4+2]‐cycloaddition reaction of the diarsene F₃CAs=AsCF₃ ( 1 ) with cyclohexa‐1,3‐diene (CHD) and to isolate single crystals of the cycloadduct 4 for a X‐ray diffraction analysis. 4 crystallizes in the space group and contains the diarsene group in its E‐configuration. 2 was also applied for [2+2]‐cycloaddition reactions of 1 with tBuC≡P and MeC≡CNⁱPr₂, but in contrast to positive results with (F₃CP)₄ the products were too labile for isolation. However, 2 was successfully used at room temperature as precursor for coordinating 1 as π‐donor ligand to the Pd(PPh₃)₂ complex fragment yielding η²‐bis(trifluoromethyl)diarsene‐bis(triphenylphosphane)‐palladium(0) 5 , which was characterized by X‐ray diffraction of single crystals and by spectroscopic investigations (NMR, IR, MS). Attempts to prove the existence of the diarsene 1 , generated by different methods, by spectroscopic studies very probably failed due to its extreme reactivity, not allowing the necessary concentrations for detection. Quantum chemical calculations of the stability of 1 with respect to dimerization, the stability of the [2+2]‐cycloadduct with 1‐di(isopropyl)aminopropyne and the energy difference between 4 and the 2,3‐dimethyl‐1,3‐butadiene cycloadduct of 1 were performed to understand the considerable differences between 1 and the related diphosphene F₃CP=PCF₃.     

Electrocatalytic Properties of a Novel Poly‐1‐Naphthylamine‐Modified Electrode Using Ascorbic Acid as Molecule Probe

A glassy carbon electrode was modified with an electropolymerized film of 1‐naphthylamine in aqueous solution. The electrocatalytic properties of this modified electrode (ME) were investigated using ascorbic acid (AA) as probe molecule. The electrochemical behavior of AA in buffer solution was examined by voltammetry and amperometry. The results showed that the ME exhibited good electrocatalytic activity towards the oxidation of AA, as a consequence, it can be used as amperometric sensor of this analyte in a flow injection system with good sensitivity. Calibration curves were linear over the concentration range 0.05–1.50 mM with a phosphate buffer solution pH 3 as the carrier, the detection limit was 1 ppm (S/N=3). The methods were applied to the determination of AA in beverages and pharmaceutical products. A good correlation with a reference method was attained.     

Electron affinity of exotic systems under Debye plasma

Electron affinity of plasma embedded muonium (μ⁺e^?) and pionium (π⁺e^?) has been estimated using a general three‐body formalism within variational framework. Electron correlation is taken care of using extended Hylleraas basis sets. The stability of the three‐body systems have been studied under the Debye screening model of the plasma, which changes the Coulombic potential to the screened Coulomb one. The electron affinity of the muonium and pionium is maximum for free systems, and it decreases gradually toward zero with increase of the plasma strength, which tends to push the three‐body system toward gradual instability. The electron correlation contribution to the affinity has been analyzed. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Transannular reactions of two parallel 1,3-butadiynes: syntheses,structures, and reactions of 1-azacyclotetradeca-3,5,10,12-tetrayne derivatives

The synthesis of 1-alkyl and 1-aryl-1-azacyclotetradeca-3,5,10,12-tetraynes was achieved in a stepwise approach. The key intermediate was 1,13-dibromotrideca-2,4,9,11-tetrayne (18). Reaction with methyl- (19 a), ethyl- (19 b), isopropyl- (19 c), n-butyl- (19 d), and tert-butylamine (19 e) as well as aniline (19 f) and p-methoxyaniline (19 g) gave the corresponding 14-membered tetraynes 20 a-20 g. The ring inversion process of 20 b was studied by variable temperature (1)H NMR spectroscopy. From these measurements a value of 10.6 kcal mol(-1) was calculated for DeltaG(not equal). X-ray investigations on single crystals of 20 b, 20 c, and 20 f revealed the axial position for the substituent at each nitrogen atom. For 20 b we encountered the chair conformation, for 20 c both chair and boat conformations, and for 20 f the boat conformation in the solid state. The reaction of 20 c with concentrated HCl in ethanol yielded 2,10-dichloro-6-isopropyl-6-azatricyclo[9.3.0.0(4,8)]tetradeca-1(11),2,4(8),9-tetraene (25 c). Compound 25 c was oxidized by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to 27 c. The structure of the latter was confirmed by X-ray investigations. The reaction of 20 c in aqueous HCl lead to the formation of 10-chloro-2-isopropyl-1,3,4,6,7,8-hexahydro-2H-benzo[g]isoquinolin-9-one (37 c). The structure of 37 c was verified by X-ray studies on single crystals.     

Synthesis,Structure, and Fluxionality of Strained Hypercoordinate Silicon‐Bridged [1]Ferrocenophanes

The first hypercoordinate sila[1]ferrocenophanes [fcSiMe(2‐C₆H₄CH₂NMe₂)] ( 5 a ) and [fcSi(CH₂Cl)(2‐C₆H₄CH₂NMe₂)] ( 5 b ) (fc=(η⁵‐C₅H₄)Fe(η⁵‐C₅H₄)) were synthesized by low‐temperature (?78 °C) reactions of Li[2‐C₆H₄CH₂NMe₂] with the appropriate chlorinated sila[1]ferrocenophanes ([fcSiMeCl] ( 1 a ) and [fcSi(CH₂Cl)Cl] ( 1 d ), respectively). Single‐crystal Xray diffraction studies revealed pseudo‐trigonal bipyramidal structures for both 5 a and 5 b , with one of the shortest reported Si???N distances for an sp³‐hybridized nitrogen atom interacting with a tetraorganosilane detected for 5 a (2.776(2) Å). Elongated Si? C_ipso bonds trans to the donating NMe₂ arms (1.919(2) and 1.909(2) Å for 5 a and 5 b , respectively) were observed relative to both the non‐trans bonds ( 5 a : 1.891(2); 5 b : 1.879(2) Å) and the Si? C_ipso bonds of the non‐hypercoordinate analogues ([fcSiMePh] ( 1 b ): 1.879(4), 1.880(4) Å; [fcSi(CH₂Cl)Ph] ( 1 e ): 1.881(2), 1.884(2)). Solution‐state fluxionality of 5 a and 5 b , suggestive of reversible coordination of the NMe₂ group to silicon, was demonstrated by means of variable‐temperature NMR studies. The ΔG^≠ of the fluxional processes for 5 a and 5 b in CD₂Cl₂ were estimated to be 35.0 and 37.6 kJ mol^?1, respectively (35.8 and 38.3 kJ mol^?1 in [D₈]toluene). The quaternization of 5 a and 5 b by MeOTf, to give [fcSiMe(2‐C₆H₄CH₂NMe₃)][OTf] ( 7 a‐ OTf) and [fcSi(CH₂Cl)(2‐C₆H₄CH₂NMe₃)][OTf] ( 7 b‐ OTf), respectively, supported the reversibility of NMe₂ coordination at the silicon center as the source of fluxionality for 5 a and 5 b . Surprisingly, low room‐temperature stability was detected for 5 b due to its tendency to intramolecularly cyclize and form the spirocyclic [fcSi(cyclo‐CH₂NMe₂CH₂C₆H₄)]Cl ( 9 ‐Cl). This process was observed in both solution and the solid state, and isolation and Xray characterization of 9 ‐Cl was achieved. The model compound, [Fc₂Si(2‐C₆H₄CH₂NMe₂)₂] ( 8 ), synthesized through reaction of [Fc₂SiCl₂] with two equivalents of Li[2‐C₆H₄CH₂NMe₂] at ?78 °C, showed a lack of hypercoordination in both the solid state and in solution (down to ?80 °C). This suggests that either the reduced steric hindrance around Si or the unique electronics of the strained sila[1]ferrocenophanes is necessary for hypercoordination to occur.     

Link between the kinetic‐ and exchange‐energy functionals in the generalized gradient approximation

An approximate kinetic‐energy functional of the generalized gradient approximation form was derived following the “conjointness conjecture” of Lee, Lee, and Parr. The functional shares the analytical form of its gradient dependency with the exchange‐energy functionals of Becke and Perdew, Burke, and Ernzerhof. The two free parameters of this functional were determined using the exact values of the kinetic energy of He and Xe atoms. A set of 12 closed‐shell atoms was used to test the accuracy of the proposed functional and more than 30 others taken from the literature. It is shown that the conjointness conjecture leads to a very good class of kinetic‐energy functionals. Moreover, the functional developed in this work is shown to be one of the most accurate despite its simple analytical form. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Detection of proline,arginine, and lysine using iodine‐azide reaction in TLC and HPTLC

The application of a modified iodine‐azide procedure for the detection of proline, arginine, and lysine is described. Phenyl isothiocyanate was used to transform amino acids into phenyl thiocarbamyl derivatives (derivatization in situ). The developed plates were sprayed with a mixture of sodium azide and starch solution, adjusted to pH 5.5, and exposed to iodine vapour. Due to the catalytic effect of the C? S bond, the spots appeared white on a violet‐grey background and were stable for 20 minutes. The detection limits were found to lie in the pmole range. The iodine‐azide test is compared with other procedures (iodine, UV, ninhydrin).     

Solubility Measurements of Surfactants and Dissolution of Cytochrome c in 1,1,1,2‐Tetrafluoroethane Modified with Organic Solvents

The solubilities of four surfactants, sodium bis‐2‐ethylhexyl sulfosuccinate (AOT), cetyltrimethylammonium chloride, didodecyldimethylammonium bromide, and n‐dodecyltrimethylammonium chloride in liquid refrigerant 1,1,1,2‐tetrafluoroethane (R134a) modified with methanol, ethanol, and 2‐propanol were measured. The measurements were performed under 25 and 50 bar at 25 °C. The solubility of AOT was as high as 92 mM in R134a with addition of 2% ethanol. Cytochrome c molecules were then verified to be soluble in the AOT‐containing and ethanol‐modified R134a solution. Accordingly, liquid R134a is suggested as a potential extraction solvent for hydrophilic compounds.