Growth Mechanism of Large Monodispersed Silica Particles Prepared from Tetraethoxysilane in the Presence of Sodium Dodecyl Sulfate

Monodispersed silica particles up to ca. 1.2 μm in diameter were prepared by hydrolysis of tetraethoxysilane in the presence of sodium dodecyl sulfate (SDS). The particle size was increased with an increase of SDS added. The geometrical standard deviation of the particles was decreased with an increase of SDS. In the earlier reaction stage, double spherical particles by the coalescence of the particles were frequently observed when large amounts of SDS were added. Particle size was gradually increased after the coalescence occurred and spherical particles were finally obtained. The results of Nielsen’s chronomal analysis suggest that the polynuclear layer growth took place after the coalescence of the particles in the presence of larger amount of SDS.     

A technical review of face mask wearing in preventing respiratory COVID-19 transmission

Since the outbreak of the COVID-19 pandemic, most countries have recommended their citizens to adopt social distance, hand hygiene, and face mask wearing. However, wearing face masks has not been well adopted by many citizens. While the reasons are complex, there is a general perception that the evidence to support face mask wearing is lacking, especially for the general public in a community setting. Face mask wearing can block or filter airborne virus-carrying particles through the working of colloid and interface science. This paper assesses current knowledge behind the design and functioning of face masks by reviewing the selection of materials, mask specifications, relevant laboratory tests, and respiratory virus transmission trials, with an overview of future development of reusable masks for the general public. This review highlights the effectiveness of face mask wearing in the prevention of COVID-19 infection.     

Chemical preparation and investigation of Fe-P-B ultrafine amorphous alloy particles

A series of Fe-P-B ultrafine amorphous alloy particles has been prepared by the chemical reduction method The composition and size of the particles have been effectively adjusted.Mossbauer spectroscopy in addition to sonic other techniques has been used to investigate the reaction process,the factors that influence the preparation,the crystallization of the particles,and the interactions between the components within them.The results indicate that the co-deposition of iron,phosphorus and boron atoms in the solution at room temperature forms Fe-P-B amorphous alloy particles,and a preferential bonding of Fe-P bond to Fe-B one exists in the particles.     

Surface functionalization of polymer latex particles. II. Catalytic oxidation of poly(methylstyrene) latexes in the presence of cetyltrimethylammonium bromide

Surface-functionalized cationic poly(methylstyrene) (PMS) latex particles containing aldehyde and carboxylic acid groups were successfully achieved via an emulsion polymerization of 3(4)-methylstyrene in the presence of cetyltrimethylammonium bromide, followed by an in-situ oxidation catalyzed by copper chloride and tert-butyl hydroperoxide (t-BuOOH). Factors such as the type of metal catalyst, oxidant, and their concentration strongly affected the rate of oxidation. Step addition of t-BuOOH resulted in both a higher degree of oxidation and a more uniform distribution of particle size of the functionalized PMS as compared to the batch addition method. The effect of organic solvent was found to be insignificant, and the oxidation could still proceed in its absence. The particle sizes increased significantly during the oxidation but could be controlled by using crosslinked PMS latexes. Finally, the versatility of this oxidation process was demonstrated by oxidation of the polymer with a solid loading as high as 28%. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3585–3593, 1997     

Self-Crosslinked Ellipsoidal Poly(Tannic Acid) Particles for Bio-Medical Applications

Self-crosslinking of Tannic acid (TA) was accomplished to obtain poly(tannic acid) (p(TA)) particles in single step, surfactant free media using sodium periodate (NaIO₄) as an oxidizing agent. Almost monodisperse p(TA) particles with 981 ± 76 nm sizes and −22 ± 4 mV zeta potential value with ellipsoidal shape was obtained. Only slight degradation of p(TA) particles with 6.8 ± 0.2% was observed at pH 7.4 in PBS up to 15 days because of the irreversible covalent formation between TA units, suggesting that hydrolytic degradation is independent from the used amounts of oxidation agents. p(TA) particles were found to be non-hemolytic up to 0.5 mg/mL concentration and found not to affect blood clotting mechanism up to 2 mg/mL concentration. Antioxidant activity of p(TA) particles was investigated by total phenol content (TPC), ferric reducing antioxidant potential (FRAP), trolox equivalent antioxidant capacity (TEAC), total flavanoid content (TFC), and Fe (II) chelating activity. p(TA) particles showed strong antioxidant capability in comparison to TA molecules, except FRAP assay. The antibacterial activity of p(TA) particles was investigated by micro-dilution technique on E. coli as Gram‑negative and S. aureus as Gram-positive bacteria and found that p(TA) particles are more effective on S. aureus with over 50% inhibition at 20 mg/mL concentration attained.     

Magnetic control of electrocatalytic and bioelectrocatalytic processes

Bioelectronics is a rapidly progressing interdisciplinary research field that has important implications for the development of biosensors, biofuel cells, biomaterial-based computers, and bioelectronic devices. Magneto-controlled molecular electronics and bioelectronics are new topics that examine the effect of an external magnetic field on electrocatalytic and bioelectrocatalytic processes of functionalized magnetic particles associated with electrodes. In this article we describe the progress in the developments of magneto-switchable electrocatalytic and bioelectrocatalytic transformations, and the effects of the rotation of the magnetic particles on the electrocatalytic and bioelectrocatalytic processes are discussed. Finally, the implications of the results on the development of biosensors, amplified immunosensors, and DNA sensors are described.     

单分散交联聚甲基丙烯酸环氧丙酯树脂的制备及亲合纯化伴刀豆球蛋白-A

采用一步种子溶胀聚合法制备了颗粒呈单分散的交联聚甲基丙烯酸环氧丙南树脂，对其环氧基的组成比进行了表征，并以氨基葡萄糖为配基，首次制备了纯化粗品伴刀豆球蛋白-A(Ⅲ）(Con-A，Ⅲ)的聚合物基质的高效亲合色谱柱。配基在树脂上的键合量为8．2mg／g，对纯化后的Con-A（Ⅲ）的吸附量为13．4mg／g。使用该亲合色谱介质成功地从粗品Con-A中快速纯化了Con-A，电泳分析显示为一个主要的谱带，纯度从15％提高到95％。     

W/O型乳胶粒子表面电性的近代测试技术

采取近代表面电学测试技术对乳胶粒子表面电性进行微观测量，取得了一系列反映胶粒表面双电层结构的特征参量，证明表面扩散双电层的存在。为完善W／O型乳胶体系的稳定性理论提供了一定实验依据。     

Fluorescent core-shell polymer particles containing luminophore dyes: synthesis and optical response to acetone

Monodisperse dye-containing crosslinked particles are promising for application in novel optical chemical sensors due to their intrinsic sensitivity. However, preparation of these particles in aqueous media still remains a challenge, since luminophores inhibit radical processes or else cannot embed into polymer chains because of difference in monomer reactivity ratios. In this work, novel dye-containing monodisperse crosslinked particles were prepared and characterized. In order to obtain dye-containing monodisperse crosslinked particles, we studied seed copolymerization of styrene in the presence of divinylbenzene. The influence of nature and concentration of the used comonomers and co-solvents on shape, size distributions and surface characteristics of the particles formed was investigated. Shapes and diameters of the particles were analyzed by DLS, TEM and SEM. The data of SEM and optical spectroscopy studies demonstrated that the synthesized particles were able to self-assemble into thin-film three-dimensional ordered structures. Finally, the structures under study are promising for development of sensor devices with optical response to acetone.