DKDP晶体的柱面形貌与缺陷分析

采用原子力显微镜观测全方位生长的DKDP晶体的{100}面形貌,发现有螺旋位错,由此推断DKDP晶体{100}面以螺旋位错机制生长;利用同步辐射X射线白光形貌术观测了DKDP晶体缺陷,探讨了不同生长条件及生长阶段对晶体完整性的影响.     

Electrophoretically deposited sulfonated poly(styrene-co-divinylbenzene) on a screw for microextraction of cationic dyes from aqueous solutions

In the present work, a novel solid-phase microextraction on a screw (MES) was employed to extract cationic dyes (malachite green, methylene blue, and rhodamine B) from food samples and fish breeding pool water. The sulfonated poly(styrene-co-divinylbenzene) was electrophoretically deposited on the surface of the grooves of a screw. Then the screw was placed inside a silicon tube as a holder to create a channel to run a test solution through it. The extracted dyes on the coated screw were eluted by a suitable eluent. High-performance liquid chromatography with an ultraviolet/visible detector was utilized for the separation and analysis of the analytes. The effective parameters of the analyte extraction efficiency were optimized. Under optimum conditions, the limits of detection were 0.15 μg/L, and calibration curves were linear in the range of 0.50–250.00 μg/L, with coefficients of determination > 0.989 for all studied dyes. The relative standard deviations of intra and inter-day (n = 3) were in the range of 2.8%–7.0% and 7.0%–9.5%, respectively. The MES was applied as a simple and repeatable method with acceptable relative recoveries (82.0%–103.0%) for the determination of cationic dyes in grape nectar, ice pop, jelly powder, and fish breeding pool water.     

Poly (Ethylene Glycol)‐Based Hydrogels as Self‐Inflating Tissue Expanders with Tunable Mechanical and Swelling Properties

Tissue expansion is used by plastic/reconstructive surgeons to grow additional skin/tissue for replacing or repairing lost or damaged soft tissues. Recently, hydrogels have been widely used for tissue expansion applications. Herein, a self‐inflating tissue expander blend composition from three different molecular weights (2, 6, and 10 kDa) of poly (ethylene glycol) diacrylate (PEGDA) hydrogel with tunable mechanical and swelling properties is presented. The in vitro results demonstrate that, of the eight studied compositions, P6 (PEGDA 6 kDa:10 kDa (50:50)) and P8 (PEGDA 6 kDa:10 kDa (35:65)) formulations provide a balance of mechanical property and swelling capability suitable for tissue expansion. Furthermore, these expanders can be compressed up to 60% of their original height and can be loaded and unloaded cyclically at least ten times with no permanent deformation. The in vivo results indicate that these two engineered blend compositions are capable to generate a swelling pressure sufficient to dilate the surrounding tissue while retaining their original shape. The histological analyses reveal the formation of fibrous capsule at the interface between the implant and the subcutaneous tissue with no signs of inflammation. Ultimately, controlling the PEGDA chain length shows potential for the development of self‐inflating tissue expanders with tunable mechanical and swelling properties.

     

含界面层圆形夹杂中螺旋位错的弹性分析

研究了复合材料含界面层圆形夹杂内部的一个螺旋位错在夹杂、界面层与基体材料中产生的弹性干涉.将复变函数的分区亚纯函数理论与柯西型积分、罗朗级数相结合,求出了各分区复势的解析关系,化为一个关于界面层复势的函数方程,用显示式表达了问题的结果,揭示了界面层参数对位错干涉能与位错力的影响规律.该解析方法较经典级数方法未知量大量减少,表达式更加简洁.结果的特殊情形包含了若干已有成果.     

Tiny families of functions with random properties: A quality-size trade-off for hashing

We present three explicit constructions of hash functions, which exhibit a trade-off between the size of the family (and hence the number of random bits needed to generate a member of the family), and the quality (or error parameter) of the pseudorandom property it achieves. Unlike previous constructions, most notably universal hashing, the size of our families is essentially independent of the size of the domain on which the functions operate. The first construction is for the mixing property—mapping a proportional part of any subset of the domain to any other subset. The other two are for the extraction property—mapping any subset of the domain almost uniformly into a range smaller than it. The second and third constructions handle, respectively, the extreme situations when the range is very large or very small. We provide lower bounds showing that our constructions are nearly optimal, and mention some applications of the new constructions. © 1997 John Wiley & Sons, Inc. Random Struct. Alg., 11 , 315–343 (1997)     

Finding any given 2‐factor in sparse pseudorandom graphs efficiently

Given an $n$‐vertex pseudorandom graph $G$ and an $n$‐vertex graph $H$ with maximum degree at most two, we wish to find a copy of $H$ in $G$, that is, an embedding $\phi :V\left(H\right)\to V\left(G\right)$ so that $\phi \left(u\right)\phi \left(v\right)\in E\left(G\right)$ for all $uv\in E\left(H\right)$. Particular instances of this problem include finding a triangle‐factor and finding a Hamilton cycle in $G$. Here, we provide a deterministic polynomial time algorithm that finds a given $H$ in any suitably pseudorandom graph $G$. The pseudorandom graphs we consider are $\left(p,\lambda \right)$‐bijumbled graphs of minimum degree which is a constant proportion of the average degree, that is, $\mathrm{\Omega }\left(pn\right)$. A $\left(p,\lambda \right)$‐bijumbled graph is characterised through the discrepancy property: $|e\left(A,B\right)?p|A||B||<\lambda \sqrt{|A||B|}$ for any two sets of vertices $A$ and $B$. Our condition $\lambda =O(p^{2}n/\log n)$ on bijumbledness is within a log factor from being tight and provides a positive answer to a recent question of Nenadov. We combine novel variants of the absorption‐reservoir method, a powerful tool from extremal graph theory and random graphs. Our approach builds on our previous work, incorporating the work of Nenadov, together with additional ideas and simplifications.     

Construction of expanders and superconcentrators using Kolmogorov complexity

We show the existence of various versions of expander graphs using Kolmogorov complexity. This method seems superior to the usual probabilistic construction. It turns out that the best known bounds on the size of expanders and superconcentrators can be attained based on this method. In the case of (acyclic) superconcentrators we attain a density of about 34 edges/vertices. Furthermore, related graph properties are reviewed, like magnification, edge‐magnification, and isolation, and we develop bounds based on the Kolmogorov approach. © 2000 John Wiley & Sons, Inc. Random Struct. Alg., 17: 64–77, 2000     

双螺杆冻胶纺丝法制备有机液体吸附功能纤维及其性能研究

在聚合釜中合成了BMA/HEMA二元共聚树脂,利用双螺杆纺丝机、采用冻胶纺丝技术制备了有机液体吸附功能纤维,研究了单体投料比中HEMA质量分数对纤维各种溶胀行为的影响,利用动态热机械分析仪(DMA)对纤维的动态力学性能进行了研究,同时利用环境扫描电子显微镜(SEM)观察了纤维的表面和断面形貌.结果表明,HEMA引入大分子后,所得纤维对有机液体甲苯、三氯乙烯具有吸附功能,且吸附过程符合sigmoidal模型中的Hill方程;随HEMA质量分数的增加,纤维对甲苯和三氯乙烯的饱和吸附量增大,对甲苯和三氯乙烯的最大吸附量分别可达10g/g和21g/g;随HEMA质量分数的增加,纤维剩余率增加的同时,使纤维对甲苯和三氯乙烯的握持能力增强;HEMA质量分数对纤维动态力学性能有突出影响,特别是链段运动受其影响更为明显;HEMA质量分数对纤维表面和断面形貌均有显著影响,特别是当HEMA质量分数为15wt%时,所得纤维表面出现了许多空洞,其断面存在许多尺寸不均的空洞.     

Polystyrene prepared by reactive extrusion: kinetics and effect of processing parameters

The conversion and residence time were investigated during the bulk polymerization of styrene in a twin screw extruder. It was found that polymerization mainly occurred in the zone between 400 and 1000 mm along the screw axis in the extruder, corresponding to the residence time of the reactants ranging from 1 to 4 min in the extruder. Furthermore, the processing conditions (feed rate, screw rotation rate) and average molecular weight of the polymer have a great effect on the residence time. Based on dimensionless analysis, a model of the residence time has been built‐up, which has been confirmed by the results of realistic measurements. A kinetic model of the polymerization has also been established under the assumption that the screw extruder can be regarded as an ideal plug flow reactor. Copyright © 2004 John Wiley & Sons, Ltd.     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.