Multi-Residue Analysis of Some Polar Pesticides in Water Samples with SPE and LC–MS–MS

In the present study a multi-residue analytical method was developed for monitoring some polar pesticides such as acephate, methamidophos, carbofuran, isoproturon, dimethoate in water with SPE (solid-phase extraction) and LC–MS–MS. Acetochlor was taken as surrogate, and alachlor as internal standard. SPE with different types of columns was compared with LLE (liquid-liquid extraction). Further, the breakthrough volume for different pesticides was determined. The results showed that the selected pesticides can be determined very sensitively with LC–MS–MS. The minimum detectable quantity (MDQ) for each pesticide was about 1.0 ng. To date, SPE cartridge studies showed that the Oasis HLB cartridges were suitable for further studies. However, for Oasis HLB cartridge, different pesticide showed different breakthrough volume. The results showed that for acephate and methamidophos, the breakthrough volume was about 30 mL of water sample, much less than the breakthrough volume of other pesticides studied. Because of the higher vapor pressure and higher Henry's constant of methamidophos, dimethoate and carbofuran, much attention should be paid on their losses in the evaporation step of the experiment. This analytical method can be applied to determine pesticide contamination in environmental water samples. Revised: 12 September 2005 and 21 October 2005     

An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

New uniform algorithm to predict reversed phase retention values under different gradient conditions

A new numerical emulation algorithm was established to calculate retention parameters in RP-HPLC with several retention times under different linear or nonlinear binary gradient elution conditions and further predict the retention time under any other binary gradient conditions. A program was written according to this algorithm and nine solutes were used to test the program. The prediction results were excellent. The maximum relative error of predicted retention time was less than 0.45%.     

Some thermodynamic aspects of highT c superconductors

Thermochemical and thermodynamical properties of HTSC phases are reviewed for the Y-Ba-Cu-O system and also presented for the newly calculated Bi-Sr-Cu-O system stressing out stoichiometric and phenomenological viewpoints. Simulated data are listed for (H ₂₉₈ ^o -H _o ^o , phase transformation temperatures, standard entropies, standard enthalpies of formation, heat capacities in crystalline phase, etc. Pseudobinary phase diagrams are treated showing the effect of oxygen partial pressure particularly illustrated on the (Sr, Bi, Ba)-Cu-O system.The work was carried out under the project No. A 2010532 supported by the Grant Agency of Academy of Sciences of the Czech Republic and the grant No. 104/97/0589 financed by the Grant Agency of the Czech Republic.     

Efficient Separation of Hydrophobic Molecules by Molecularly Imprinted Cyclodextrin Polymers

Cyclodextrins were cross-linked with toluene 2,4-diisocyanate in dimethyl sufoxide in the presence of hydrophobic biomolecules as templates, and the imprinted polymers were applied to the stationary phases of high performance liquid chromatography. Molecular imprinting efficiently promoted the binding-affinity and substrate-selectivity towards the template molecule, compared with the control polymers prepared in their absence. When cholesterol (template molecule) was complexed with cyclodextrins prior to the polymerization, for example, the imprinted polymer retained cholesterol more strongly than other steroids. Upon the polymerization without a template molecule, the binding towards steroids was much weaker. Besides steroids, imprinting was effective for various hydrophobic and rigid template molecules. Since binding of the guest molecule was based on inclusion complex formation with cyclodextrins, separation could be achieved in the solvents containing water. These polymeric receptors are also applicable to selective recognition of biologically important molecules or removal of toxic molecules from aqueous media. Thus, imprinting of cyclodextrins is useful for the preparation of synthetic tailor-made receptors for various kinds of hydrophobic guest molecules.     

Investigations of the thermal stability and phase transformations in the system marocco phosphorite—(NH4)3H(SO4)2.NH4HSO4

Different physical chemical methods were used to study the thermochemical processes in a system involving a natural phosphate and complex acid salts of ammonium sulphate. The products of decomposition of the double ammonium salt and the products of their interactions with the phosphate were identified. The formation of ammonium and calcium polyphosphates and the disproportionation of P₃O ₁₀ ^5? and P₂O ₇ ^4? to PO ₄ ^3? and PO ₃ ^? were found to depend on the circumstances of the thermal interactions.     

茉莉醛相转移催化合成法的改良

茉莉醛又称2-戊基肉桂醛,具有优雅的茉莉花香,是一种深受调香师喜爱的合成香料。目前已广泛应用于各种日用化学品中。     

Determination of Hormones and Non-ionic Surfactant Degradation Products in Small-Volume Aqueous Samples from Soil Columns Using LC-ESI-MS-MS and GC-MS

The leaching of two estrogens, 17β-estradiol and estrone, and two degradation products of non-ionic surfactants, octylphenol and nonylphenol, through a soil column were studied to estimate their transport behavior. Different concentration methods (lyophilization, solid phase extraction, and liquid–liquid extraction) were evaluated for analyzing these compounds in small effluent fractions (30–50 mL) collected. Liquid chromatography-mass spectrometry (LC-MS-MS) and gas chromatography-mass spectrometry (GC-MS) were employed for quantitative analysis of these compounds. After comparison, the lyophilization-LC-MS-MS method was found to be best suited for the analysis of the two estrogen hormones and the liquid–liquid extraction-GC-MS method best for the analysis of the two phenols in small samples in the soil column study. Because of their high sorption capacity, these compounds were mostly sorbed in the upper part of the soil column and were difficult to detect in column effluent.     

Novel polymer blends based on poly(ether-urethane) ionomer and ion-containing styrene copolymer

The structure-property relationships of thermoplastic polymer blends based on poly(ether-urethane) ionomer (PEUI) and ion-containing styrene-acrylic acid copolymer (S-co-AA(K)) have been investigated by using DMTA, DSC and TGA, as well as tensile tests. Convergence of the glass transition temperature (T_g) values of the PEUI and the S-co-AA(K) components in the blends studied, as compared to the individual polymers, was found and explained by improving compatibility of the components due to increasing effective density of physical networks formed by ion-dipole and ion-ion interactions of ionic groups of the components. Character of E'=f(T) and E'=f(T) dependencies confirms the increase of the effective density of physical networks in the compositions studied compared to individual PEUI and S-co-AA(K). Improvement of end-use properties, i.e. thermal stability and tensile properties has been found for the PEUI/S-co-AA(K) compositions with lower content of S-co-AA(K) (i.e. <10 mass%) and explained by formation of additional network of intermolecular ionic bonds between the functional groups of PEUI and S-co-AA(K).     

Concentrated reverse micelles in a random graft block copolymer system: structure and in-situ synthesis of silver nanoparticles

The structure and rheological properties of a poly(dimethylsiloxane)-graft-poly(oxyethylene) copolymer at high concentrations in block-selective solvents were studied by small-angle X-ray scattering (SAXS) and rheometry. Analysis of SAXS data indicates that quasispherical, reverse micellar aggregates (with no ordered packing) are present in concentrated solutions of the copolymer in nonpolar solvents, and that upon addition of water, the size of such aggregates increases due to the solubilization inside the micellar cores. The viscosity of concentrated polymer solutions increases exponentially as water is added, and finally, viscoelastic, gel-like behavior is found in the vicinity of the phase separation limit. It was found that small silver nanoparticles with an average diameter of ≈3 nm can be synthesized inside the copolymer aggregates without the need of a reducing agent; namely, particles embedded in a viscoelastic matrix are obtained. The synthesis seems to follow first-order kinetics. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.