一类利用回归关系的计量指标抽样方案

在产品质量判定的抽样检验问题中,当目标指标需用破坏性试验才能得其值时,更为常用的是用非破坏性试验可得量值的协变指标量来预报它。但在产品抽样验收问题上,未能形成理论较为严密的方法,这是由于预报误差这个关键问题的处理尚未解决得好,即给不出抽样方案的功效计算的正确或是近似性较好的公式。本文通过建立合理的数学模型,把对目标指标的质量要求化为对协变指标量的统计要求,从而利用两者的回归关系,结合两种复杂的抽样方案,给出功效函数的计算公式和计算方法,并进行了分析。     

大非球面镜的郎奇检验灵敏度理论研究及仿真分析

为了研究等间距直线条光栅的周期及其他相关参数的变化对大非球面镜朗奇检验法的影响,提出了一种评估郎奇检验灵敏度大小的新方法。其检验灵敏度定义为一个光栅周期所能检测到的镜面偏差大小能力。在朗奇检验的几何原理基础上,利用光线追迹法讨论了镜面偏差与朗奇光栅周期之间的关系,并以此推导出检验灵敏度公式,计算了抛物面镜的朗奇检测灵敏度。分析结果表明,如果给定镜子的规格参数及检验光路,朗奇检验灵敏度分别随着光栅周期间隔和半通光口径的变大而减小。     

Evaluation of Water Ammonium Ion Test Kit and Its Feasibility for the Analysis of Protein in Food

The traditional method for the determination of protein in food needs the operations of digestion, distillation, absorption, and titration; therefore, it is complicated and time-consuming and requires professional personnel. Is there a more convenient and faster detection method that can directly determine the ammonium ions in protein digestion solution to obtain the protein content of food and avoid the distillation–absorption–titration process? The feasibility of water ammonium ion test kits for food protein rapid detection was discussed here. After digestion, the protein in food transforms into ammonium ions in the digestion solution. Because of the variety of food, there are many different inorganic ions left in the food digestion solution, and at the same time, digestion agents are added in the digestion process and become potential interference factors in ammonium determination. Therefore, the detection accuracy of ammonium test kits needs to be evaluated first, including their anti-interference ability. The standard curve of ammonium was established by the test kit. When the ammonium concentration was 0.00–2.50 mg/L, the absorbance at 620 nm was linearly related to the ammonium concentration, the determination coefficient R² was 0.9995, and the detection limit of this method was 0.01 mg/L. The influences of temperature, pH value, and reaction time on the test kit method were discussed. The precision was 0.90–3.33%; the repeatability was 1.71–4.86%; and the recovery rate of tap water, river water, and sea water was controlled within 90–103%. The anti-interference ability of the evaluated test kit was better than that of the national standard detection method. The test kit, combined with sample pretreatment and protein conversion formula, was used to detect protein in different types of food (milk powder, rice flour, wheat flour, soy, banana, milk, fish food, chicken food, and dog food). The results showed that there were no significant differences (ρ > 0.05) between the national method and the test kit method. The ammonium ion test kit method shortened the determination time and had higher sensitivity, showing its potential for the rapid determination of food protein.     

坝前淤泥土与新填坝体接触面抗剪强度试验研究及工程应用

坝前淤泥面与新填筑坝体接触面是"坝前淤泥面加坝"技术的薄弱环节.为了探究不同工况下淤泥坝基、新填筑坝体,以及淤泥土-新填土接触面的剪切强度特性,以宁夏南部山区西吉县南川水库坝前淤泥面加坝工程为研究对象,通过常规应变式直剪仪、改进常规应变式直剪仪分别进行剪切试验,分析了淤泥土含水率和压实度变化时,淤泥土、新填土、淤泥土-...     

DETERMINATION OF INTERFACIAL MECHANICAL PARAMETERS FOR AN Al/EPOXY/Al2O3 SYSTEM BY USING PEEL TEST SIMULATIONS

Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90, 135 and 180 degrees are considered. Two types of epoxy adhesives are adopted to obtain both strong and weak interface adhesions. A finite element model with cohesive zone elements is used to identify the interfacial parameters and simulate the peel test process. By simulating and recording normal stress near the crack tip, the separation strength is obtained, Furthermore, the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result. It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.     

直接解调方法在嫦娥一号卫星X射线谱仪地面验证实验数据分析中的应用

"嫦娥一号"卫星是我国的第一颗月球探测卫星,运行轨道高度为200 km,预计工作寿命为一年,其上配备的X射线成像谱仪具备了对月表进行X射线探测、成像和对太阳X射线进行监测的功能.该X射线谱仪由两个全同的探测器阵列组成,其中,为了实现对月表主要化学元素分布及其含量进行探测的科学目标,在每个探测器阵列还配备了2个低能探测器单元.这4路低能探测器单元的面积为25 mm2,采用的都是厚度为500 μm,具有优良探测性能的Si-PIN探测器,其探测能区为1～10 keV,能量分辨率为～5%@5.9 kev.文章主要介绍了嫦娥一号卫星X射线谱仪的地面验证实验,并且根据X射线谱仪的能量响应矩阵,利用直接解调方法和基本参数法对X射线谱仪地面验证实验中的探测数据,特别是对盲测样品中的Mg,Al,Si等元素进行了定性和定量分析.     

主成分分析-支持向量机用于肝病分类模型

将主成分分析(PCA)用于肝功能检测数据特征提取,然后用支持向量机(SVM)对乙肝、丙肝、肝硬化、正常人样本建立分类模型。采用高斯径向基函数(RBF)为核函数,调节核函数参数C及σ以建立最佳支持向量机模型。该模型对训练集的识别率为99.3%,对预测集的预测率为96.4%。结果表明:PCA-SVM法建立的肝病分类模型能较好的区分乙肝、丙肝、肝硬化及正常人,且分类效果优于传统支持向量机及人工神经网络(ANN)分类模型。     

基于学科素养论证分析2020年高考全国卷Ⅰ物理压轴题

2020年高考物理试题依托高考评价体系,结合物理学科特点,考试内容以学科素养考查为导向,即以物理观念、科学思维、科学探究、科学态度与责任的物理学科素养为导向,注重对核心物理概念和规律的考查,引导学生夯实学习发展的基础,促进中学重视培养学生的基础知识、基本技能以及提升学生的基本素养.基于物理学科素养,论证分析2020年高考全国理综卷Ⅰ物理压轴计算题,助力培养学生科学思维.     

Weighted Cumulative Past Extropy and Its Inference

This paper introduces and studies a new generalization of cumulative past extropy called weighted cumulative past extropy (WCPJ) for continuous random variables. We explore the following: if the WCPJs of the last order statistic are equal for two distributions, then these two distributions will be equal. We examine some properties of the WCPJ, and a number of inequalities involving bounds for WCPJ are obtained. Studies related to reliability theory are discussed. Finally, the empirical version of the WCPJ is considered, and a test statistic is proposed. The critical cutoff points of the test statistic are computed numerically. Then, the power of this test is compared to a number of alternative approaches. In some situations, its power is superior to the rest, and in some other settings, it is somewhat weaker than the others. The simulation study shows that the use of this test statistic can be satisfactory with due attention to its simple form and the rich information content behind it.     

Relationship between Muscle Flexibility and Characteristics of Muscle Contraction in Healthy Women during Different Menstrual Phases

Objective: Skeletal muscle function is vital for preventing injury during exercise. It has been reported that skeletal muscle function fluctuates with the menstrual cycle and is considered one of the causes of injury. This study aimed to clarify the relationship between muscle flexibility and muscle contraction characteristics and their changes with the menstrual cycle. Methods: The subjects were healthy women who voluntarily participated in the study through recruitment posters. Muscle flexibility was measured with the passive knee extension (PKE) test, isokinetic knee flexor strength, and the maximum muscle strength exertion angle under two conditions of 60°/s and 120°/s in dominant hamstrings. Additionally, their correlations were analyzed and compared between the menstrual and ovulatory phases. Results: Sixteen subjects (mean age: 20.56 ± 0.73 years; body mass index: 20.21 ± 1.60) participated in the study. Correlation analysis showed a significant negative correlation between PKE and the maximum muscle strength exertion angle under the condition of 60°/s during the menstrual phase (r = –0.54; p = 0.03). No significant difference was observed in the two-group comparison of the variables measured during the menstrual and ovulatory phases. Conclusion: This study confirmed that the more flexible muscles generate the maximum strength at a more contracted position during the menstrual phase in women. In the future, it is necessary to examine the relationship between the results of this study and exercise performance and injury occurrence.