Optimization of Adsorbent Layer Type and Developing Solvent in Coccidiostats Sample Preparation with Procedure of Solvent Front Position Extraction

Coccidiostats are drugs used against coccidiosis, a common disease among breeding animals. Their widespread application leads to the appearance of their residues in food, which is potentially harmful for human health and life. The European Union has established limits of concentrations of these drugs in premixtures and food. Nowadays, there are many methods for monitoring coccidiostats’ presence in market products, but their frequent weakness is sample preparation. Solvent Front Position Extraction is a planar chromatography-based sample preparation method that allows for effective assay of samples with coccidiostats when coupled with LC-MS/MS. The purpose of this research was to find common conditions for the effective isolation of eight coccidiostats from biological sample components with both lower and higher retention than the substances of interest. The acquired results were used for effective isolation of monensin and salinomycin from the premixture samples and allowed for their quantitative determination. The application of a semi-automatic device for the development of chromatograms positively impacted the results, confirming the effectiveness of the method for determining coccidiostats in biological samples.     

电感耦合等离子体质谱法同时测定地质样品中镉、锗、钴

建立电感耦合等离子体质谱法同时测定地质样品中镉、锗、钴含量的分析方法。样品用氢氟酸-硝酸混合溶液加热溶解,然后加热浓缩驱酸,再用硝酸溶液(1+1)复溶提取,在选定的仪器工作条件下进行测定。镉、锗、钴的含量分别在0.00~0.10,0.00~5.00,0.00~50.00 μg/g范围内与质谱峰强度呈良好的线性关系,相关系数均大于0.999,方法检出限分别为0.01,0.02,0.02 μg/g。用该方法对国家一级标准物质进行测定,测定值的相对误差均小于10%,测定结果的相对标准偏差为0.79%~8.45%(n=12)。该方法样品处理过程简便,检测效率高,适用于批量地质样品中镉、锗、钴的测定。     

Analytical method development and validation of anticancer agent, 5-fluorouracil,and its metabolites in biological matrices: An updated review

Abstract

5-fluorouracil (5-FU) refers to a fluorinated pyrimidine analogue that has been widely used as an anticancer agent for colon, head, and neck cancers. Detection of 5-FU and its metabolites; 5-fluorouridine and 5-fluoro-2-deoxyuridine in biological samples allows optimization of pharmacotherapy and encourages fundamental investigations of this medication. The development of accurate and reliable sample preparation, as well as analytical methods, is critical to isolate targeted analytes from complex matrices, apart from increasing detection sensitivity of analytes. With that, this paper presents a review of prior studies pertaining to chromatographic and electrophoretic methods that focused on the analysis of 5-FU and its metabolites in biological matrices such as plasma and urine. This paper concentrates on HPLC, GC and CE systems, which are the most commonly used strategies for analytical separation of 5-FU and its metabolites from samples. Detection of these antineoplastic agents at trace level demands highly sensitive and selective analytical methodologies. Application of these analytical techniques to biological matrices is reviewed with a focus on method development strategies, including types of mobile phases and background electrolytes employed in LC and CE systems.     

An improved sealed quartz‐tube method for the determination of hydrogen isotopes in water

Hydrogen stable isotope analysis has been a valuable tool in the fields of geochemistry and ecological research as well as many other research fields. The methods are mainly divided into the dual‐inlet method (off‐line method) and continuous flow method. The dual‐inlet method is complicated and inefficient, but it is still important because of its high precision and wide application range. Although the continuous flow method improves the experimental efficiency, the memory effect is noticeable and the accuracy is reduced. An improved sealed quartz‐tube method is proposed in this paper. The sample is sealed in a capillary tube and placed in a quartz tube containing chromium powder. It is then packaged, evacuated, reacted at a high temperature, and analyzed for hydrogen isotope ratio. Excellent data accuracy, good reproducibility (<1‰), and no memory effect occurred in the method. The process is relatively simple, and the experimental efficiency is greatly improved, which provides an effective method for the analysis of hydrogen isotopes in complex liquid samples.     

Sample Preparation Methods for Lipidomics Approaches Used in Studies of Obesity

Obesity is associated with alterations in the composition and amounts of lipids. Lipids have over 1.7 million representatives. Most lipid groups differ in composition, properties and chemical structure. These small molecules control various metabolic pathways, determine the metabolism of other compounds and are substrates for the syntheses of different derivatives. Recently, lipidomics has become an important branch of medical/clinical sciences similar to proteomics and genomics. Due to the much higher lipid accumulation in obese patients and many alterations in the compositions of various groups of lipids, the methods used for sample preparations for lipidomic studies of samples from obese subjects sometimes have to be modified. Appropriate sample preparation methods allow for the identification of a wide range of analytes by advanced analytical methods, including mass spectrometry. This is especially the case in studies with obese subjects, as the amounts of some lipids are much higher, others are present in trace amounts, and obese subjects have some specific alterations of the lipid profile. As a result, it is best to use a method previously tested on samples from obese subjects. However, most of these methods can be also used in healthy, nonobese subjects or patients with other dyslipidemias. This review is an overview of sample preparation methods for analysis as one of the major critical steps in the overall analytical procedure.     

Evaluation of an Element-Tagged Duplex Immunoassay Coupled with Inductively Coupled Plasma Mass Spectrometry Detection: A Further Study for the Application of the New Assay in Clinical Laboratory

Background: Element-tagged immunoassay coupled with inductively coupled plasma mass spectrometry (ICP-MS) detection has the potential to revolutionize immunoassay analysis for multiplex detection. However, a further study referring to the standard evaluation and clinical sample verification is needed to ensure its reliability for simultaneous analysis in clinical laboratories. Methods: Carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) were chosen for the duplex immunoassay. The performance of the assay was evaluated according to guidelines from the Clinical and Laboratory Standards Institute (CLSI). Moreover, reference intervals (RIs) of CEA and AFP were established. At last, 329 clinical samples were analyzed by the proposed method and results were compared with those obtained with electrochemiluminescent immunoassay (ECLIA) method. Results: The measurement range of the assay was 2–940 ng/mL for CEA and 1.5–1000 ng/mL for AFP, with a detection limit of 0.94 ng/mL and 0.34 ng/mL, respectively. The inter-assay and intra-assay imprecision were all less than 6.58% and 10.62%, respectively. The RI of CEA and AFP was 0–3.84 ng/mL and 0–9.94 ng/mL, respectively. Regarding to clinical sample detection, no significant difference was observed between the proposed duplex assay and the ECLIA method. Conclusions: The ICP-MS-based duplex immunoassay was successfully developed and the analytical performance fully proved clinical applicability. Well, this could be different with other analytes.     

A modified quick,easy, cheap,effective, rugged,and safe method with hydrophobic natural deep eutectic solvent as extractant and analyte protectant for analyzing pyrethroid residues in tomatoes

In this work, a novel quick, easy, cheap, effective, rugged, and safe technique with hydrophobic natural deep eutectic solvent as both extractant and analyte protectant was developed and combined with gas chromatography–tandem mass spectrometry to analyze pyrethroid residues in tomatoes. Eight hydrophobic natural deep eutectic solvents were first evaluated as analyte protectants and those with decanoic acid or lactic acid as hydrogen bond donor were demonstrated to be effective in compensating for the matrix effects of pyrethroids in the gas chromatography system. Hence, they were added to solvent standards for correcting the quantitation errors instead of matrix‐matched calibration standards. Then the abilities of these acid‐based deep eutectic solvents to extract pyrethriods from tomatoes were evaluated. Results showed the recoveries of all pyrethroids reached to over 80% with only 5 mL menthol:decanoic acid (1:1) used, and good phase separation was easily achieved without the addition of inorganic salt in the extraction step, indicating hydrophobic natural deep eutectic solvent could be a green substitute for acetonitrile in the quick, easy, cheap, effective, rugged, and safe extraction. Compared with the conventional method, the proposed protocol improved the recoveries, reduced the matrix effects, and simplified the extraction step, demonstrating to be an effective, fast, and green method.     

Development of a solid‐phase microextraction LC–MS/MS method for determination of oxidative stress biomarkers in biofluids

Recently the connection between oxidative stress and various diseases, including cancer and Alzheimer's, attracts notice as a pathway suitable for diagnostic purposes. 8‐Oxo‐deoxyguanosine and 8‐oxo‐deoxyadenosine produced from the interaction of reactive oxygen species with DNA become prominent as biomarkers. Several methods have been developed for their determination in biofluids, including solid‐phase extraction and enzyme‐linked immunosorbent assays. However, still, there is a need for reliable and fast analytical methods. In this context, solid‐phase microextraction offers many advantages such as flexibility in geometry and applicable sample volume, as well as high adaptability to high‐throughput sampling. In this study, a solid‐phase microextraction method was developed for the determination of 8‐oxo‐deoxyguanosine and 8‐oxo‐deoxyadenosine in biofluids. The extractive phase of solid‐phase microextraction consisted of hydrophilic–lipophilic balanced polymeric particles. In order to develop a solid‐phase microextraction method suitable for the determination of the analytes in saliva and urine, several parameters, including desorption solvent, desorption time, sample pH, and ionic strength, were scrutinized. Analytical figures of merit indicated that the developed method provides reasonable interday and intraday precisions (<15% in both biofluids) with acceptable accuracy. The method provides a limit of quantification for both biomarkers at 5.0 and 10.0 ng/mL levels in saliva and urine matrices, respectively.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Determination of sulfadimethoxine in milk with aptamer‐functionalized Fe3O4/graphene oxide as magnetic solid‐phase extraction adsorbent prior to HPLC

An aptamer (Apt) functionalized magnetic material was prepared by covalently link Apt to Fe₃O₄/graphene oxide (Fe₃O₄/GO) composite by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride and N‐hydroxysuccinimide, and then characterized by FTIR spectroscopy, X‐ray diffraction, and vibration sample magnetometry. The obtained composite of Fe₃O₄/GO/Apt was employed as magnetic solid‐phase extraction adsorbent for the selective preconcentration of sulfadimethoxine prior to analysis by high‐performance liquid chromatography. Under the optimal conditions (sample pH of 4.0, sorbent dosage of 20 mg, extraction time of 3 h, and methanol‐5% acetic acid solution as eluent), a good linear relationship was obtained between the peak area and concentration of sulfadimethoxine in the range of 5.0 to 1500.0 µg/L with correlation coefficient of 0.9997. The limit of detection (S/N = 3) was 3.3 µg/L. The developed method was successfully applied to the analysis of sulfadimethoxine in milk with recoveries in the range of 75.9‐92.3% and relative standard deviations less than 8.1%. The adsorption mechanism of Fe₃O₄/GO/Apt toward sulfadimethoxine was studied through the adsorption kinetics and adsorption isotherms, and the results show that the adsorption process fits well with the pseudo‐second‐order kinetic model and the adsorbate on Fe₃O₄/GO/Apt is multilayer and heterogeneous.