Einfaches Verfahren zur Bestimmung des Chloridgehaltes von schwefelsauren galvanischen Kupferb?dern mit Hilfe ionensensitiver Elektroden

Zusammenfassung Die Anwendung einer chloridionensensitiven Elektrode für die direktpotentiometrische Chloridbestimmung in galvanischen BÄdern wird beschrieben und eine genaue Arbeitsvorschrift sowie drei verschiedene Auswerteverfahren angegeben. Die Messungen wurden in einem Bereich von 30–250 mg Cl^– je Liter Badlösung an Modellösungen durchgeführt. Die einzelnen Methoden ergaben eine Standardabweichung von ±2,1 mg bei Verwendung einer Eichkurve, ±2,2 mg beim Standardzusatzverfahren und ±3,6 mg bei der Direktablesung auf einer logarithmisch geteilten Skala eines mV-Meters. Ebenso wurden Messungen an einer Reihe von Badproben durchgeführt.Für wertvolle Anregungen und Diskussionen danken wir Herrn Schwank, Siemens AG, Abt. Informationselektronik.     

The detection of oxygen in magneto-optical layers with SIMS

The detection of oxygen in magneto-optical layers is of fundamental importance for the characterization of the stability of RE-TM material. The magnetic properties are directly influenced by oxide formation. Oxygen depth profiles are carried out by using the SIMS technique. A comparison with magnetic measurements showed a clear conformity. We were able to study the oxidation behaviour of various layers at room temperature and at higher values up to 250° C for several hours. It could be shown that aluminum is a successful material for the protection of RE-films against oxidation. The difficulties of translating SIMS counting rates into concentration values were overcome by using EPMA. Specially prepared reference samples were measured by this technique and could then be used as standard samples for SIMS.     

Proton magnetic relaxation study of water orientation around I− and Li+

Proton relaxation time measurements are performed for 6m aqueous solutions of⁷LiI and⁶LiI in D₂O containing small amounts of H₂O. The measurements are done at low temperatures and yield maxima of the relaxation rate plotted against 1/T. From the maxima of the relaxation rates, proteon-I^– and proton-Li⁺ distances in the first coordination sphere of the ions are determined, and from the knowledge of the ion-water oxygen distance it is shown that for iodide a somewhat broadened H-bonded configuration is valid and that for Li⁺ the electric dipole orientation deviates from the radial direction. In order to test the reliability of the method a proton-¹²⁷I interaction study is also performed in KI solution in glycerol. The I-H distance obtained is in satisfactory agreement with that found in the aqueous system.     

Emission,Emissionslebensdauer und Absorption von [Cr urea6]X3-Einkristallen

Emission and absorption polarization spectra as well as emission lifetimes between room temperature and 5 °K have been measured of [Cr urea₆]X₃ single crystals, where X stands for ClO ₄ ^– , J^–, NO ₃ ^– , Br^–, Cl^–, F^–, and X₃ for JSO ₄ ^3– . The strong temperature dependence of the fluorescence/phosphorescence-ratios, and of the emission lifetimes is discussed. The differences between the spectra as well as the emission lifetimes of the various salts can be attributed to an anion dependent trigonal perturbation.

Die Autoren danken dem Verband der Chemischen Industrie für finanzielle Unterstützung dieser Arbeit.     

Equations describing lamellar structure parameters and melting points of polyethylene-<Emphasis Type="Italic">co</Emphasis>-(butene/octene)s

Time- and temperature-dependent SAXS-experiments were used to determine the effect of octene and butene co-units on the lamellar structure and the melting properties of polyethylene. As expected, melting points decrease with increasing co-unit content, but crystal thicknesses are not affected and depend on the crystallization temperature only. Results can be cast into some simple equations which describe the dependence:

Photometrische Bestimmung von Zirkoniumoxidchlorid in Speisesalz

Zusammenfassung 2-Chinolylfluoron bildet mit Zirkonium einen 14-Komplex, dessen Extinktionskoeffizient bei 539 nm _max=165000 ist. Das Bestimmungsverfahren für ZrOCl₂ in Speisesalz wird auf dieser Farbreaktion aufgebaut.

---

Photometric determination of ZrOCl₂ in table salt

2-Quinolylfluorone forms a 14-complex with zirconium. Owing to its high extinction coefficient _max=165000 at =539 nm the complex can be used for the determination of ZrOCl₂ in table salt.

     

Electrocatalytic dehalogenation of α-bromoketones in the presence of Cp2TiCl2

Processes of direct and electrocatalytic (in the presence of electrochemically reduced Cp₂TiCl₂) reduction of three α-bromoketones containing the C(sp³)-Br or C(sp²)-Br bond, viz., 2-bromo-and 2,6-dibromo-4,4-dimethylcyclohexa-2,5-dien-1-ones and α-bromo-acetophenone, were studied by cyclic voltammetry and preparative electrolysis. In all cases, the dissociative electron transfer proceeds via the concerted mechanism. Preparative electrolysis of these α-bromoketones in the presence of Cp₂TiCl₂ affords the reductive debromination products in 40–80% yield at low cathodic potentials (−0.85 V vs. Ag/AgCl/KCl). In the case of 2,6-dibromo-4,4-dimethylcyclohexa-2,5-dien-1-one in the potentiostatic regime, only one bromine atom can be eliminated selectively. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 977–983, May, 2007.     

Synthesis and properties of novel poly(amide-imide)s containing pendent diphenylamino groups

A new dicarboxylic acid, 2,4-bis(N-trimellitoyl)triphenylamine, bearing two preformed imide rings was synthesized from the condensation of 2,4-diaminotriphenylamine and trimellitic anhydride at 1:2 molar ratio. A series of poly(amide-imide)s (PAIs) with inherent viscosities of 0.38-0.66 dl/g were prepared by triphenyl phosphite-activated polycondensation from the diimide-dicarboxylic acid with various aromatic diamines. All the resulting PAIs were readily soluble in a variety of organic solvents and formed strong and tough films via solution casting. These PAIs have useful levels of thermal stability associated with moderately high glass-transition temperatures (259-314 °C) and 10% weight loss temperatures in excess of 530 °C in nitrogen or in air.     

Beta-delayed two-proton decay of39Ti

The beta-delayed two-proton decay of theT _z =–5/2 nuclide³⁹Ti has been observed. The³⁹Sc isobaric analog state has been calculated to lie at 8.82 MeV using the measured two-proton sum energy of 4750±40 keV for its decay to the³⁷K ground state. Combining this excitation energy with a Coulomb displacement energy calculation has lowered the energy available for ground state two-proton emission of³⁹Ti from 760 to 530 keV.This work was supported by Director, Office of Energy Research, Division of Nuclear Physics of the Office of High Energy and Nuclear Physics of the U.S. Depeartment of Energy under Contracts DE-AC03-76SF00098 with Lawrence Berkeley Laboratory, DE-AC02-76CH00016 with Brookhaven National Laboratory and DE-AC06-76RL0 1830 with Pacific Northwest Laboratories.