Influence of caged bicyclic phosphate and CaCO3 nanoparticles on char-forming property of PU rigid foams

Char-forming property of PU rigid foams, which can be assessed by char residue (%) when PU is burned at certain temperature, was studied by TG and DTG. The results showed that pure PU rigid foam had low char residue of only 17%, while 33% of char residue was achieved when PU rigid foam was modified by adding 8 wt% of 1-oxo-2,6,7-trioxa-1-phosphabicyclo[2,2,2] octane (PEPA), which is a caged bicyclic phosphate. The experiment results of FTIR and XPS showed that the PEPA modified PU rigid foam could be dehydrogenated and dehydrated at temperature between 380 and 450 °C, resulting in the increase of char residue of PU rigid foam. Further study also revealed that the addition of CaCO₃ nanoparticles could enhance the char stability when the PEPA modified PU rigid foam was being burned. The mechanism was investigated and it was found that the enhanced char stability could be attributed to the limited permeation of oxygen caused by the formation of calcium phosphate and calcium pyrophosphate by the reaction of PEPA and CaCO₃ at high temperature, which were covered on or buried in the char layer.     

Filler effects on the thermomechanical response of stretched rubbers

This paper deals with the calorimetric analysis of deformation processes in filled styrene-butadiene rubbers. More especially, the study focuses on the effects of the addition of carbon black fillers on the calorimetric response of “demullinized” SBR. Temperature variations are measured by infrared thermography during cyclic uniaxial tensile tests at ambient temperature. Heat sources¹ produced or absorbed by the material due to deformation processes are deduced from temperature fields by using the heat diffusion equation. First, the results show that no mechanical (intrinsic) dissipation is detected for weakly filled SBR, meaning that the heat produced and absorbed over one mechanical cycle is the same whatever the stretch ratio reached. Second, the mechanical dissipation in highly filled SBR is significant. The quantitative analysis carried out highlights the fact that it increases quasi-linearly with the stretch ratio. Finally, a simplified framework is proposed to discuss the identification of the heat sources, in particular the mechanical dissipation.     

Ternary blends based on poly (ethylene-naphthalate)/glass fibers/nitrile rubber: Preparation,properties and effect of dynamic vulcanization

This work studied the possibility of utilizing nitrile rubber (NBR) to modify the impact properties of poly (ethylene-naphthalate) (PEN). The PEN/NBR ratio used changed from 100/0 to 60/40. At the same time, glass fibers (GF), 40% weight of the PEN component, were used to reinforce the blends to compensate for the loss of mechanical properties of PEN by incorporation of NBR. The results showed that the impact strength of the PEN/GF/NBR blend (PEN/NBR = 60/40) was increased up to 27.6J/m, nearly 5 times higher than that of the neat PEN. Meanwhile, the tensile strength and flexural strength were still maintained at as high as 66.1 MPa and 98.2 MPa, respectively. Dynamic vulcanization further improved the mechanical properties of the PEN/GF/NBR blends, which provided routes to the design of new PEN/elastomer blends. Other properties of the PEN/GF/NBR blends were also investigated in terms of morphology of fractured surface, dynamic mechanical behavior, thermal stability and crystallization, by scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively.     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Experimental Validation of the Temperature-Resistant and Salt-Tolerant Xanthan Enhanced Foam for Enhancing Oil Recovery

Xanthan enhanced foam (XGF) is a newly developed chemical agent for enhanced oil recovery in high-temperature and high-salinity reservoirs. In this paper, laboratory experiments were performed to characterize the morphology and foam properties of XGF, to study its performance under different temperature and different salinity conditions, respectively. Based on simulate reservoir formation conditions of Xidaliya field, a series of research on XGF were conducted. The experimental results showed that the scanning electron microscopy of XGF reflected a more viscoelastic and stable nature of the foam system. High temperature had a great adverse impact upon the stability of XGF, and the increase of salinity in the solution helped to improve the stability of foam. The foam stability increased remarkably when XG4 is added, and an increase in ambient pressure made enhancement of foam stability became more noticeable. In the presence of crude oil, Xanthan could enhance the stability of emulsions and was more favorable to stabilize foam. XG4 enhanced foam had dramatic properties for mobility controlling and oil displacement in the porous media.     

The Influences of Polymers and Temperature on the Foam Properties of 3‐Dodecylalkoxyl‐2‐hydroxylpropyl Trimethylammonium Chloride

The foam performances of 3‐dodecoxy‐2‐hydroxypropyl trimethylammonium chloride (C₁₂TAC) have been determined in the existence of different relative amount of polymer. The experimental results show that the foaming ability of the mixture systems of the C₁₂TAC/PEG and C₁₂TAC/PVP is stronger than that of the surfactant solutions in the absence of polymer, and with the increase of relative amount of polymer both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced. For the aqueous solution of the surfactant, effect of temperature on foaming properties has also been examined. The results show that both the foaming ability and stability of the foams of the surfactant solutions are highest (or strongest) at 30°C.     

CFD Simulation of Rheological Model Effect on Cuttings Transport

Foam, as a non-Newtonian fluid, plays an important role in the underbalanced drilling technique in oil field development. The rheological properties of drilling fluids, such as foam, have a direct effect on flow characteristics and hydraulic performance. Two rheological models—the Herschel–Bulkley model and power law—were fitted to two foam systems in this study. Computational fluid dynamics (CFD) was used to simulate the effect of the rheological models on solid–liquid (cuttings transport) hydraulics in concentric and eccentric annulus during the foam drilling operation. The simulation results are compared to the experimental data from previous studies. The results of CFD using the power law model are in good agreement with experimental results in horizontal annulus with respect to the Herschel–Bulkley model with relative error less than 8%. Thus, for CFD cuttings transport for simulations in inclined and horizontal annulus, it is best to use the power law's rheological model parameters.     

Adsorption of Nonionic Surfactant from Its Aqueous Solution onto Commercial Rubber

Adsorption of Ethoxylated Nonyl Phenol (ENP) surfactant from its aqueous solution onto a commercial tire cutting from different sites. Outer Peristalitic (O.P.), Outer Smouth (O.S.), and Internal Tire (I.T.) is studied after different immersion times, 24, 48, 72, and 144 hrs at 30° C. The adsorption isotherms are determined by a surface tension method. A two stepped L-type isotherm is characteristic below the CMC of ENP; above this concentration the isotherm deviates from the L-type and the slope of the isotherm increases sharply. A Langmuir fit has been found below the CMC of ENP. From the maximum amounts adsorbed at pseudo-plateau (T_max of the tested samples it was found that the efficiency of adsorption onto the rubber surface decreases in the order, O.P. > O.S. > I.T.     

Preparation,characterization and applications of polyurethane foam functionalized with resorcinol for quantitative separation and determination of silver(I) and mercury(II) from tap and wastewater

A stable chelating resin matrix was prepared by covalently linking resorcinol with polyurethane foam matrix through a –N=N– group. Preconcentration and determination of trace Ag⁺ and Hg²⁺ ions from samples of different origin, using Res-PUF, were studied. Various conditions influencing the sorption of these metal ions onto Res-PUF were optimized. The kinetics of sorption of the Ag⁺ and Hg²⁺ by Res-PUF were found to be fast, reached equilibrium in few minutes (5–10?min) and followed a first-order rate equation with an overall rate constant k in 0.102 and 0.267/min, respectively. Study of the variation of the sorption of the tested metal ions with temperature yielded average values for ΔG, ΔH and ΔS of ?3.94, ?22.02 and ?58.37, respectively. The mean free sorption energy (E) computed from the Dubinin–Radushkevich (D–R) isotherm was found to be equal to 8.91 kJ/mol, which reflects the chelation sorption process. The capacities of the foam material were 0.15 and 0.07?mmol/g for Ag⁺ and Hg²⁺, respectively. Preconcentration factors of?>?50 were achieved (RSD?≈?5.99). The proposed preconcentration procedure was applied successfully to the determination of trace metal ions in natural and wastewater samples.     

Retention profile of Fe,Mn and Cu onto chemically treated polyurethane with carbon disulfide

Dithiocarbamate modified polyurethane foam (DTC-PUF) was synthesized as a new solid-phase extraction sorbent for the preconcentration and determination of Fe(II), Mn(II) and Cu(II) in environmental samples using flame atomic absorption spectrometry. Maximum extraction of the elements was achieved at pH 5–7 and flow rate 3 mL min^?1. Quantitative desorption was achieved by 10 mL from 1.0 mol L^?1 HCl solution. The capacity of the sorbent was 149.2 ± 0.5, 237.5 ± 0.2, 200.2 ± 0.1 μg g^?1 and the limit of detection was of 0.015, 0.015 and 0.012 μg mL^?1for Fe(II), Mn(II) and Cu(II), respectively. A preconcentration factor of 100 was obtained for all elements. The developed method was successfully applied to the determination of the tested elements in water (tap and lake) and plant (spinach and parsley leaves) samples and showed good recovery values from 98 to 111% with corresponding RSD values ranged from 0.6 to 8.6%.