陡前沿脉冲产生的受激布里渊散射稳定性研究

受激布里渊散射转换效率及相位共轭保真度的稳定性与泵浦脉冲的前沿上升时间有关，对前沿上升时间与介质声学声子寿命接近的泵浦脉冲，在泵浦能量超过受激布里渊散射阈值较多时，会造成严重的相位共轭保真度不稳定。本文针对上升前沿时间为２ｎｓ的泵浦脉冲及声学声子寿命的１ｎｓ和ＣＣｌ４介质，在泵浦脉冲前沿根部引入缓慢上升的小信号后，采用振放双池受激布里渊散射相位共轭镜，在泵浦激光能量达到５００倍受激布里渊散射阈值时     

Characterisation of the Kratos Axis Ultra with spherical mirror analyser for XPS imaging

The imaging performance of an XPS instrument employing a spherical mirror electron energy analyser has been characterised by measuring the peak position, full width at half maximum (FWHM), and lineshape, at every pixel in the image, for different modes of operation. Changes in these parameters have been identified and recommendations made for quantification of, and chemical state determination from, spectrum image data sets. Copyright © 2006 John Wiley & Sons, Ltd.     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

Wigner function of the rotating Morse oscillator

We present an analytical expression of the Wigner distribution function (WDF) for the bound eigenstates of the rotating Morse oscillator (RMO). The effect of rotational excitation on the WDF on the quantum phase space has been demonstrated. This effect has been visualized by a series of contour diagrams for given rovibrational quantum states. Rotations of the molecule have been proved to qualitatively and quantitatively change the Wigner function. As a result, the most probable distance between atoms in a rotating molecule changes, and depends on the parity of the vibrational quantum number. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Electroreduction of Pd(II) Complexes with α-Alanine on a Palladium Electrode

The kinetics of electroreduction of Pd(II) complexes with -alanine, Pd(ala)₂, is studied on a rotating Pd disk electrode in solutions of pH 8–13 containing large excess of -alanine and various supporting electrolytes (NaF, Na₂SO₄, NaClO₄). On a Pd electrode, complexes Pd(ala)₂ undergo reduction at potentials much more negative than on an Hg electrode. This is attributed to the chemisorption of water on the Pd electrode, which hampers adsorption of Pd(ala)₂ that take part in the slow electrochemical stage. As with the Hg electrode, perchlorate ions hinder the Pd(ala)₂ reduction on a Pd electrode. Studying adsorption of Pd(ala)₂ on a Pd electrode is hampered by parallel processes of hydrogen adsorption and absorption.     

CALCULATING THE MOLECULAR INTERNAL ROTATING STERIC FACTOR OF POLYMERS BY THE RADIATION CROSSLINKING METHOD

In this paper, calculating the molecular internal rotating steric factor of polymers by the radiation crosslinking method is studied and a relationship between the molecular internal rotating steric factor (σ) and crosslinking parameter βis established~([1]) by taking account of the effect of polymer chain flexibility on βvalue, σvalue of polymer obtained by this method is in agreement with that given with other method.     

Elastic Analysis of Anisotropic Functionally Graded Rotating Disks With Non-Uniform Thicknesses北大核心CSCD

研究了任意梯度变化的变厚度各向异性转动圆盘的弹性问题.假设圆盘绕刚性轴匀速转动,其材料性能和厚度沿径向任意梯度变化.考虑圆盘在中心转轴处受位移约束,外侧自由,根据各向异性转动圆盘的平衡微分方程,得到关于径向应力的Fredholm积分方程,继而通过对Fredholm积分方程进行数值求解,得到结构的位移场和应力场.对具体梯度变化情况仅需代入相应梯度变化进行求解即可.数值算例部分,通过假设厚度、弹性模量等参数为特殊的幂函数形式,将由Fredholm积分方程求出的数值解与对应的精确解进行对比,以及针对常见的Voigt模型,将由该方法算得的数值解和ANSYS有限元计算结果进行对比,验证了该方法的准确性和精度.其次,针对Voigt模型,重点分析了厚度变化、材料性能梯度参数、各向异性度等对应力场和位移场的影响.提出了针对材料性能和厚度沿径向呈任意梯度变化的圆盘结构弹性分析方法,将为优化功能梯度圆盘的结构和材料参数、有效调整构件应力分布、提高结构安全性,提供强有力的工具;算例分析结果对功能梯度圆盘在复杂条件下的结构安全设计有重要的理论指导意义.     

Role of Hydrodynamic Conditions in the Distribution of Anodic Dissolution Rates in Cavity Etching Regions during Electrochemical Micromachining of Partially Insulated Surfaces

Experimental study of the distribution of local rates of electrochemical micromachining in the presence of photoresist masks in various hydrodynamic conditions (macroscopically nonuniform rotating disk electrode, sprayer flow, an electrode placed into a cell with chaotic bulk electrolyte mixing) shows that the maximum etching localization is achieved at the control of the dissolution rate by the mass transport rate (at achieving the anodic limiting current). The localization enhancement as compared to the primary current distribution takes place in the case of a turbulent flow at hydrodynamic conditions where the removal of dissolution products from the undercutting region is hindered. These conditions (electrochemical reaction limited by the ion mass transport rate, high resistance to the mass transport in the undercutting region) are necessary for the localization enhancement using a pulsed anodic–cathodic treatment.     

The effect of a coriolis force on Taylor-Couette flow

Taylor-Couette flow subject to a Coriolis force is studied experimentally and numerically. In the experiment, the Couette apparatus is mounted on a turntable with the axis of the cylinders orthogonal to the rotation vector of the turntable. The Coriolis force stabilizes the fluid against the onset of Taylor vortices and alters the velocity fields, both above and below the transition from the initial flow. At small dimensionless turntable frequencies, the transition yields time-independent Taylor vortices which are tilted with respect to the cylinder axis. At larger there is a direct transition to turbulence. We determine the first-order correction to the classical Couette initial flow, to account for the effects of the Coriolis force, by expanding in powers of. We present numerical results for the axial velocity (the only nonvanishing correction term to order) in the infinite-cylinder approximation.     

能动抛光磨盘的变形实验研究

 能动抛光磨盘实时产生不同的表面变形，在对大口径非球面光学元件进行精磨和抛光时实现与工件表面良好的大尺寸吻合，可以消除传统光学加工采用小尺寸磨头时带来的高频残余误差并提高加工效率。以加工直径1.3m左右，F/2的抛物面光学元件为例，对能动磨盘在不同离轴度时能够产生的变形进行了计算和实验。结果表明，能动磨盘能够以较高精度产生旋转对称或非对称的抛物面形状。对能动磨盘产生变形后的残余误差进行了分析。