A competitive particle nucleation mechanism in the polymerization of homogenized styrene emulsions

The effects of concentrations of surfactant (sodium lauryl sulfate [SLS]) and initiator (sodium persulfate [SPS]) on the polymerization of homogenized styrene emulsions, stabilized by SLS/lauryl methacrylate (LMA) or SLS/stearyl methacrylate (SMA), were studied. The rate of polymerization increases with increasing [SLS] or [SPS]. In addition to monomer droplet nucleation, the formation of particle nuclei in the aqueous phase (homogeneous nucleation) plays a crucial role in the polymerization kinetics. In comparison with the LMA containing polymerization system, monomer droplet nucleation becomes more important when the more hydrophobic SMA was used as the costabilizer. Furthermore, the degree of homogeneous nucleation increases with increasing [SPS].     

Fracture mechanisms in rigid core-shell particle modified high performance epoxies

The fracture mechanisms of a high performance epoxy system modified with two types of preformed rigid core-shell particles (RCSP) were investigated. The use of the preformed RCSP anables the control of the dispersion of the toughener phase in the epoxy, which, in turn, allows the mechanical properties of the modified epoxy to be optimized. The toughening effect via the RCSP modification is found to be as good as that via the core-shell rubber modification. The moduli andT _g of these RCSP-modified epoxies are virtually unaltered via the RCSP modification, when compared with the neat epoxy resin equivalent. The toughening mechanisms in these toughened systems appear to be predominantly crack deflection, crack bifurcation, and microcracking. Approaches for effective toughening of high performance polymers via rigid polymers are discussed.     

1H-NMR Relaxation of Water Molecules in the Aqueous Microcrystalline Cellulose Suspension Systems and Their Viscosity

An intensive study for aqueous microcrystalline cellulose (MCC) suspensions was carried out in view of the relationship between a viscosity and a 1H spin-spin relaxation time (T2) of water. An investigation was carried out for four suspension systems with the different particle size distributions. The proton mole ratio () of bound water against MCC particles and T2 of bound water (T2,b) were evaluated from the T2 values obtained by Carr-Purcell- Meiboom-Gill (C.P.M.G) method and those by solid echo method, respectively. As a result of these analyses, the T2,b value for the aqueous MCC suspension was evaluated as 5 × 10–3 s and it was found that the system having a larger tended to show a higher viscosity. By relating the above results to the observation of the suspensions by an optical microscope, it was concluded that a network formed by MCC particles plays an important role in generating a high viscosity of MCC suspension, and that an averaged mobility of water molecules is sensitively affected by the network structure.     

Study of formation of nano-quasicrystals and crystallization kinetics of Zr-Al-Ni-Cu metallic glass

The formation of nano-quasicrystals on isothermal annealing of melt-spun ribbons of Zr_69.5Al_7.5Ni₁₁Cu₁₂ metallic glass has been investigated using transmission electron microscopy (TEM). The crystallization study of this metallic glass has been carried out using differential scanning calorimetry (DSC) in non-isothermal (linear heating) mode. It exhibits two-stage crystallization where the first stage corresponds to the precipitation of icosohedral nano-quasicrystalline phase. This has been confirmed with the help of TEM investigations. The crystallization parameters like the activation energy (E _c) and frequency factor (k ₀) have been derived using the Kissinger peak shift analysis. The activation energies for the first and second crystallization peak are found to be 278 and 295 kJ mol^–1, respectively. The frequency factors obtained for the two peaks are respectively 7.16·10¹⁹ and 1.42·10²⁰ s^–1. E _c, k ₀ and the Avrami exponent (n) have also been derived by fitting the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation for the transformed volume fraction (x) to the crystallization data. JMAK results of E _c for the first and second crystallization peak turn out to be 270 and 290 kJ mol^–1 respectively. However, k ₀ and n are found to be heating rate dependent as reported in similar studies. The values of n for the first crystallization stage ranges between 1.66 and 2.57 indicating diffusion-controlled transformation in agreement with earlier reports.     

Laser Doppler anemometry under plasma conditions. Part II. Measurements in an inductively coupled r.f. plasma

Laser Doppler anemometry is used for the measurements of the plasma and particle velocity profiles in the coil region of an inductively coupled r.f. plasma. Results are reported for a 50 mm i.d. induction plasma torch operated at atmospheric pressure with argon as the plasma gas. The oscillator frequency is 3 MHz and the plate power is varied between 4.6 and 10.5 kW. Plasma velocity measurements are obtained using a fine carbon powder as a tracer. Measurements are also given for larger silicon particles ( ) centrally injected into the discharge under different operating conditions.Nomenclature d _p particle diameter - P ₀ plasma power - Q ₁ powder carrier gas flow rate - Q ₂ plasma gas flow rate - Q ₃ sheath gas flow rate - r distance in the radial direction - V axial plasma velocity - V _p axial particle velocity - Z distance in the axial direction - standard deviation     

Cation-crown ether complex formation in water. II. Alkali and alkaline earth cations and 12-crown-4, 15-crown-5, and 18-crown-6

The stability constants and the partial molal volume and isentropic partial molal compressibility changes of complex formation between cations and crown ethers in water at 25°C are presented. The cations involved are Na⁺, K⁺, Rb⁺, Cs⁺, Ca²⁺, and Ba²⁺, and the crown ethers are 12-crown-4, 15-crown-5, and 18-crown-6. Values of V of complex formation have been discussed in terms of two simple models, one based on the scaled particle theory, and the others on the Drude-Nernst continuum model. The results indicate that the charge of the potassium cation in 18-crown-6 is especially well screened from the water. On this basis hydration numbers of complexed cations have been calculated. This shows that the size of the cation compared to the crown ether hole is important for the contacts between complexed cations and water.     

金属离子对CdS量子点/聚酰胺-胺树形分子纳米复合材料光致发光性能的影响

以聚酰胺-胺树形分子为模板制备了分散好、尺寸均匀的CdS量子点，并用分光光度滴定法研究了Cd²⁺、Zn²⁺、Pb²⁺、Cu²⁺、Mn²⁺几种金属离子对其光致发光性能的影响。发现不同离子对CdS量子点的发光性能影响不同:Cd²⁺和Zn²⁺使量子点荧光增强，Pb²⁺、Cu²⁺和Mn²⁺使其荧光有不同程度淬灭。这归因于金属离子对CdS量子点表面的修饰作用。Cd²⁺能减少由S^2-悬键构成的非辐射复合中心，增强树形分子对量子点表面缺陷的钝化作用，并能在量子点周围形成类肖特基能垒，从而显著增大CdS量子点的光致发光效率。由于ZnS与CdS的晶格参数非常接近，Zn²⁺能起到与Cd²⁺类似的作用，使CdS量子点的发光效率大大增强。Pb²⁺和Cu²⁺能取代Cd²⁺在CdS量子点表面生成窄带隙的壳层，对其发光有很强的淬灭作用。由于块体PbS的带隙比块体CuS窄，故Pb²⁺的淬灭能力强于Cu²⁺。Mn²⁺能破坏Cd²⁺与PAMAM树形分子的配位键，降低树形分子对CdS量子点表面缺陷的钝化作用，且其本身在量子点表面构成了新的荧光淬灭中心，但Mn²⁺也能形成较弱的类肖特基能垒，故对量子点的发光淬灭作用较弱。     

硅氧烷乳液聚合过程中大颗粒形成机理研究：Ⅰ.阳离子型乳液的耐电解质…

探讨了二甲基聚硅氧烷阳离子型乳液耐电解质稳定性的影响因素。结果表明，加入少量的非离子型表面活性剂与阳离子型乳化剂并用进行乳液聚合，可以保护乳液粒子，防止由于电解质引的乳液粒子的相互凝聚而形成大颗粒。     

Janus particles with a functional gold surface for control of surface plasmon resonance

We report in this study the presence of Janus particles, which are candidates for use with electronic color papers. We used negatively charged polystyrene particles (370 nm) as the core particles, and gold was then sputtered onto their packed monolayer under several conditions. The sputtered particles were next redispersed into the aqueous medium by gentle sonication. Gold nanoparticles localized on one side of the cores could also serve as seeds for subsequent shell growth by electroless gold plating. Through these treatments, a series of well-dispersed Janus particles were obtained with gold nanostructures of different size and shape only on one side. Their dispersions showed different colors originating from the surface plasmon resonance absorption of gold nanoparticles localized on the hemisphere. The particles obtained by this approach have potential applications such as in sensors and electronic color paper.     

Future of biological aerosol detection

Biological aerosol detection in real time is an urgent civilian and military requirement. Such detection capability will be useful in environmental monitoring, for example, in gathering information in perceived hazardous areas such as housing developments downwind of sewage treatment plants. To be truly functional, the instrument has to operate continuously, 24 h a day and 7 days a week with minimal maintenance and few false alarms. A novel concept is proposed. The system employs a rapid front-end warning/alarming mechanism based on optical technologies that provides useful information for protection decision makers. This is connected to a sample collector that feeds a slower back-end liquid chemistry system that provides analytical results to the medical personnel to assist in prophylaxis and therapy decisions. Experience gained from measuring fluorescence signals of single bacterial spores under flow cytometry (FCM) using UV excitation at 340-360 nm, was applied to concept testing of a prototype instrument, built to do the same for aerosols. This machine was capable of resolving particle size as well as fluorescence intensity of each particle under laboratory and field conditions; it was called the fluorescent aerodynamic particle sizer (FLAPS). This paper describes practical aspects of measuring biological aerosols when the results must be compared to reference samplers that provide culturable or “live” data. Treatment of particle size and fluorescence information is discussed with respect to FLAPS and reference data fidelity. Along with an objective method to evaluate FLAPS data correlation to reference data, an approach for determining limit of detection in the field is discussed. In addressing the back-end detector chemistry, we have prioritized a number of important biological characteristics that must be given to a clinician to help in prophylaxis and therapy decisions. A series of biochemical measurements are proposed to define the threat of a sample and different solutions are given to implement these tests. We predict that the future for biological detection looks promising for fluorescence in situ hybridization (FISH) techniques in identifying microorganisms. A conceptual instrument based on merging FCM and microchip-based analysis is described.